[Sun Dec 18 02:24:48 2011] Detection parameters:
  Position = (269.1, 296.9) = 0 56 47.01 60 43 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 654.2 +/- 41.7
  Background counts = 11.3
  Rate = 0.05 +/- 0.003

[Sun Dec 18 02:24:49 2011] Off-axis axis estimate = 2.13'
[Sun Dec 18 03:09:01 2011] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 03:09:01 2011] Initial guess for spatial extent in simple fitting = 7.49"
[Sun Dec 18 03:09:01 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.658
[Sun Dec 18 03:09:01 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.49"
[Sun Dec 18 06:40:59 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src2.ximg exists
[Sun Dec 18 06:40:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src2.csv
[Sun Dec 18 06:40:59 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Dec 18 06:40:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src2.csv
[Sun Dec 18 06:40:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 06:40:59 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Dec 18 06:40:59 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Dec 18 06:40:59 2011] Fit fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Dec 18 06:41:08 2011] Source 2 is offset by -6.767883 and 5.832489 pixels which is larger than
2 X fitted extent = 2.542336 x 2.542336, not incorporating fit results
[Sun Dec 18 06:41:08 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 06:41:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 06:41:08 2011] Assessing source extent using major
[Sun Dec 18 06:41:08 2011] Source does appear to be extended
[Sun Dec 18 06:41:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 06:41:08 2011] Source is confused with source 4
[Sun Dec 18 07:26:52 2011] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 07:26:52 2011] Initial guess for spatial extent in simple fitting = 7.49"
[Sun Dec 18 07:26:52 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.658
[Sun Dec 18 07:26:52 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.49"
[Sun Dec 18 08:04:20 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src2.ximg exists
[Sun Dec 18 08:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src2.csv
[Sun Dec 18 08:04:20 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Dec 18 08:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src2.csv
[Sun Dec 18 08:04:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 08:04:20 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Dec 18 08:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Dec 18 08:04:20 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Dec 18 08:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Dec 18 08:04:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 08:04:26 2011] Source 2 is offset by -6.767883 and 5.832489 pixels which is larger than
2 X fitted extent = 1.851104 x 1.851104, not incorporating fit results
[Sun Dec 18 08:04:26 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 08:04:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 08:04:26 2011] Assessing source extent using major
[Sun Dec 18 08:04:26 2011] Source does appear to be extended
[Sun Dec 18 08:04:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 10:43:15 2011] XMMSAS src. selection expression = ellipse(23365.104187, 25785.516510, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 18 10:43:15 2011] Writing source region out to fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src2_src.reg
[Sun Dec 18 10:43:15 2011] Extracting stamp from image fullrun_mos2_xmm0651670401_pi300-10000_cl_sm2.00.img.gz, (232, 259) - (307, 334)
[Sun Dec 18 10:43:15 2011] XMMSAS bgd. selection expression = annulus(23365.104187, 25785.516510, 1087.500000, 2175.000000, X, Y) && !ellipse(24076.008000, 25080.667000, 1573.336845, 1573.336845, 0.000000, X, Y) && !ellipse(23702.067230, 26139.500946, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 18 10:43:15 2011] Writing fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src2.gif
[Sun Dec 18 10:52:02 2011] Mean detx,y = (-529.05, -99.56) 
[Sun Dec 18 10:52:04 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 10:52:23 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 10:52:24 2011] Setting source spectrum file to fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 18 10:52:24 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Dec 18 10:58:50 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 18 10:58:50 2011] rmf not generated due to insufficient counts
[Sun Dec 18 11:00:41 2011] Updating aperture counts using extracted products
[Sun Dec 18 11:00:41 2011] Error reading totcts from fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Dec 18 11:00:41 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 11:00:41 2011] Using photon index=1.80, rate=0.0472, arf fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src2.arf
[Sun Dec 18 11:00:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 11:00:41 2011] Updating source flux to 5.8e-13
[Sun Dec 18 11:01:19 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting