[Sun Dec 18 02:24:48 2011] Detection parameters:
  Position = (277.3, 288.9) = 0 56 42.16 60 42 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255746.2 +/- 587.8
  Background counts = 11.2
  Rate = 2e+01 +/- 0.04

[Sun Dec 18 02:24:49 2011] Off-axis axis estimate = 1.68'
[Sun Dec 18 03:09:01 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 03:09:01 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Dec 18 03:09:01 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sun Dec 18 03:09:01 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun Dec 18 06:40:59 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 18 06:40:59 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 06:40:59 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 18 06:40:59 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 06:40:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 06:40:59 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 06:40:59 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 06:40:59 2011] Fit fullrun_mos2_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 06:41:08 2011] Spatial fit model total counts = 228269.000000, observed total counts = 230527.000000
[Sun Dec 18 06:41:08 2011] Offset between fit and detection position for source 1 = 0.173308 pixels
[Sun Dec 18 06:41:08 2011] 227298.000000 total counts/ 25600.000000 bgd. counts: snr = 1260.612500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.173308 pixels
  Position = (277.1, 288.8) = 0 56 42.26 60 42 59.0
  Extent = 7.1 (7.1-7.1)", rotation angle = 0
  Source counts = 201698.0 +/- 476.8
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.03
[Sun Dec 18 06:41:08 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 06:41:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 06:41:08 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 06:41:08 2011] Source does appear to be extended
[Sun Dec 18 06:41:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 07:26:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 07:26:52 2011] Initial guess for spatial extent in simple fitting = 7.09"
[Sun Dec 18 07:26:52 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Sun Dec 18 07:26:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.09"
[Sun Dec 18 08:04:20 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 18 08:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 08:04:20 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 18 08:04:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 08:04:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 08:04:20 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 08:04:20 2011] fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 08:04:20 2011] Fit fullrun_mos2_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 18 08:04:26 2011] Spatial fit model total counts = 219203.000000, observed total counts = 230527.000000
[Sun Dec 18 08:04:26 2011] Offset between fit and detection position for source 1 = 0.162600 pixels
[Sun Dec 18 08:04:26 2011] 219169.000000 total counts/ 25600.000000 bgd. counts: snr = 1209.806250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.162600 pixels
  Position = (277.3, 288.8) = 0 56 42.17 60 42 59.0
  Extent = 6.6 (6.5-6.6)", rotation angle = 0
  Source counts = 193569.0 +/- 468.2
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.03
[Sun Dec 18 08:04:26 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 08:04:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 08:04:26 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 08:04:26 2011] Source does appear to be extended
[Sun Dec 18 08:04:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 10:43:15 2011] Counts = 193569.000000, rescaling region sizes by 3.000000
[Sun Dec 18 10:43:15 2011] XMMSAS src. selection expression = ellipse(24076.008000, 25080.667000, 1180.002634, 1180.002634, 0.000000, X, Y)
[Sun Dec 18 10:43:15 2011] Writing source region out to fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 18 10:43:15 2011] Extracting stamp from image fullrun_mos2_xmm0651670401_pi300-10000_cl_sm2.00.img.gz, (209, 221) - (345, 357)
[Sun Dec 18 10:43:15 2011] XMMSAS bgd. selection expression = annulus(24076.008000, 25080.667000, 5900.013170, 11800.026340, X, Y) && !ellipse(23365.104187, 25785.516510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23702.067230, 26139.500946, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 18 10:43:15 2011] Writing fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src1.gif
[Sun Dec 18 10:43:43 2011] Mean detx,y = (121.61, 70.78) 
[Sun Dec 18 10:43:48 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 10:51:51 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 10:51:51 2011] Setting source spectrum file to fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 10:51:51 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 18 11:00:41 2011] Updating aperture counts using extracted products
[Sun Dec 18 11:00:41 2011] Error reading totcts from fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 11:00:41 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 11:00:41 2011] Using photon index=1.80, rate=11, arf fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 11:00:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 11:00:41 2011] Updating source flux to 1.3e-10
[Sun Dec 18 11:01:50 2011] Reading fit data from xmm0651670401/analysis//spectral/fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Dec 18 11:01:50 2011] Spectral fit parameter nH value = 1.05861e+21
[Sun Dec 18 11:01:50 2011] Spectral fit parameter PhoIndex value = 1.5103
[Sun Dec 18 11:01:50 2011] Failed to get F(0.3-8.0) from xmm0651670401/analysis//spectral/fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Dec 18 11:01:50 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 11:01:50 2011] Using Nh = 1.1e+21, photon index=1.51, rate=11, arf fullrun_mos2_xmm0651670401_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 11:01:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 11:01:50 2011] Updating source flux to 1.6e-10