[Sun Dec 18 02:24:14 2011] Detection parameters: Position = (282.2, 195.0) = 0 56 39.20 60 36 12.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 33.4 +/- 7.4 Background counts = 8.4 Rate = 0.004 +/- 0.0008 [Sun Dec 18 02:24:14 2011] Off-axis axis estimate = 7.59' [Sun Dec 18 02:50:25 2011] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting [Sun Dec 18 02:50:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Dec 18 02:50:25 2011] Initial guess for spatial extent in simple fitting = 10.22" [Sun Dec 18 02:50:25 2011] source mask rpix=2.4, npix_max = 32, mask sum = 34, frac = 1.046 [Sun Dec 18 02:50:25 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.22" [Sun Dec 18 03:09:01 2011] fullrun_mos1_xmm0651670401_pi300-10000_cl_pass0_src2.ximg exists [Sun Dec 18 03:09:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651670401_pi300-10000_cl_pass0_src2.csv [Sun Dec 18 03:09:01 2011] fullrun_mos1_xmm0651670401_pi300-10000_cl_pass0_src2_1.ximg exists [Sun Dec 18 03:09:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651670401_pi300-10000_cl_pass0_src2.csv [Sun Dec 18 03:09:01 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0651670401_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0651670401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Dec 18 03:09:01 2011] fullrun_mos1_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Sun Dec 18 03:09:01 2011] fullrun_mos1_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Sun Dec 18 03:09:01 2011] Fit fullrun_mos1_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Sun Dec 18 06:41:05 2011] Spatial fit model total counts = 85.757600, observed total counts = 87.000000 [Sun Dec 18 06:41:05 2011] Offset between fit and detection position for source 4 = 0.267926 pixels [Sun Dec 18 06:41:05 2011] 79.852300 total counts/ 52.318300 bgd. counts: snr = 3.806646 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.267926 pixels Position = (282.3, 195.3) = 0 56 39.19 60 36 12.1 Extent = 5.0 (3.8-7.1)", rotation angle = 0 Source counts = 27.5 +/- 8.9 Background counts = 52.3 Rate = 0.002 +/- 0.0005 [Sun Dec 18 06:41:05 2011] Vigneting correction estimate = 1.000000 [Sun Dec 18 06:41:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 18 06:41:05 2011] Assessing source extent using major axis lower bound [Sun Dec 18 06:41:05 2011] Source does appear to be extended [Sun Dec 18 06:41:05 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 18 06:41:05 2011] Deleting source due to low Poisson probability 0.6