[Sat Feb 11 10:12:33 2012] Detection parameters:
  Position = (292.4, 314.9) = 0 56 33.85 60 45 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 370.6 +/- 30.7
  Background counts = 46.1
  Rate = 0.04 +/- 0.003

[Sat Feb 11 10:12:33 2012] Off-axis axis estimate = 1.27'
[Sat Feb 11 10:17:27 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 10:17:27 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Sat Feb 11 10:17:27 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.108
[Sat Feb 11 10:17:27 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.07"
[Sat Feb 11 13:24:57 2012] fullrun_pn_xmm0651670301_pi300-10000_cl_pass0_src3.ximg exists
[Sat Feb 11 13:24:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651670301_pi300-10000_cl_pass0_src3.csv
[Sat Feb 11 13:24:57 2012] fullrun_pn_xmm0651670301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Feb 11 13:24:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651670301_pi300-10000_cl_pass0_src3.csv
[Sat Feb 11 13:24:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651670301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651670301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 13:24:57 2012] fullrun_pn_xmm0651670301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Feb 11 13:24:57 2012] fullrun_pn_xmm0651670301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Feb 11 13:24:57 2012] Fit fullrun_pn_xmm0651670301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Feb 11 14:10:24 2012] Spatial fit model total counts = 2587.380000, observed total counts = 2584.000000
[Sat Feb 11 14:10:24 2012] Offset between fit and detection position for source 3 = 6.807364 pixels
[Sat Feb 11 14:10:24 2012] 2638.058000 total counts/ 1805.410000 bgd. counts: snr = 19.596275
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.807364 pixels
  Position = (287.8, 309.9) = 0 56 36.56 60 44 44.0
  Extent = 14.1 (14.1-28.3)", rotation angle = 0
  Source counts = 832.6 +/- 51.4
  Background counts = 1805.4
  Rate = 0.05 +/- 0.003
[Sat Feb 11 14:10:24 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 14:10:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 14:10:24 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 14:10:24 2012] Source does appear to be extended
[Sat Feb 11 14:10:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 14:10:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 14:10:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 11 14:10:31 2012] Initial guess for spatial extent in simple fitting = 14.13"
[Sat Feb 11 14:10:31 2012] source mask rpix=3.2, npix_max = 56, mask sum = 64, frac = 1.139
[Sat Feb 11 14:10:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.13"
[Sat Feb 11 16:27:09 2012] fullrun_pn_xmm0651670301_pi300-10000_cl_pass1_src3.ximg exists
[Sat Feb 11 16:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651670301_pi300-10000_cl_pass1_src3.csv
[Sat Feb 11 16:27:09 2012] fullrun_pn_xmm0651670301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Feb 11 16:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651670301_pi300-10000_cl_pass1_src3.csv
[Sat Feb 11 16:27:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651670301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651670301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 16:27:09 2012] fullrun_pn_xmm0651670301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Feb 11 16:27:09 2012] fullrun_pn_xmm0651670301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Feb 11 16:27:09 2012] Fit fullrun_pn_xmm0651670301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Feb 11 17:08:37 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Sat Feb 11 17:08:37 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 17:08:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 17:08:37 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 17:08:37 2012] Source does appear to be extended
[Sat Feb 11 17:08:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 17:08:37 2012] Source is confused with source 4
[Sat Feb 11 17:08:42 2012] XMMSAS src. selection expression = ellipse(24992.002000, 26910.752000, 847.866024, 847.866024, 0.000000, X, Y)
[Sat Feb 11 17:08:42 2012] Writing source region out to fullrun_pn_xmm0651670301_pi300-10000_pass1_cl_src3_src.reg
[Sat Feb 11 17:08:42 2012] Extracting stamp from image fullrun_pn_xmm0651670301_pi300-10000_cl_sm2.00.img.gz, (239, 261) - (337, 359)
[Sat Feb 11 17:08:42 2012] XMMSAS bgd. selection expression = annulus(24992.002000, 26910.752000, 1413.110041, 2826.220081, X, Y) && !ellipse(25928.910200, 28527.427400, 741.551221, 741.551221, 0.000000, X, Y) && !ellipse(25869.780000, 28381.792000, 1160.352033, 1160.352033, 0.000000, X, Y) && !ellipse(24443.730000, 25791.012000, 2109.480061, 2109.480061, 0.000000, X, Y) && !ellipse(24159.554000, 24841.983000, 1581.693646, 1567.315245, 289.961100, X, Y)
[Sat Feb 11 17:08:42 2012] Writing fullrun_pn_xmm0651670301_pi300-10000_pass1_cl_src3.gif
[Sat Feb 11 17:15:47 2012] Mean detx,y = (135.83, 1804.93) 
[Sat Feb 11 17:15:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 17:15:58 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 17:15:58 2012] Setting source spectrum file to fullrun_pn_xmm0651670301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Feb 11 17:15:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651670301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Feb 12 05:26:30 2012] Updating aperture counts using extracted products
[Sun Feb 12 05:26:30 2012] Error reading totcts from fullrun_pn_xmm0651670301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Feb 12 05:26:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 05:26:30 2012] Using photon index=1.80, rate=0.0534, arf fullrun_pn_xmm0651670301_pi300-10000_pass1_cl_src3.arf
[Sun Feb 12 05:26:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 05:26:30 2012] Updating source flux to 1.7e-13
[Sun Feb 12 05:27:02 2012] Flag c found in src. 3 procflags, skipping spectral fitting