[Sat Mar 17 13:41:12 2012] Detection parameters:
  Position = (282.0, 282.2) = 0 56 41.92 60 42 59.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196438.1 +/- 524.4
  Background counts = 10.8
  Rate = 1e+01 +/- 0.03

[Sat Mar 17 13:41:12 2012] Off-axis axis estimate = 1.67'
[Sat Mar 17 14:43:16 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 14:43:16 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Mar 17 14:43:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Sat Mar 17 14:43:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Mar 17 23:56:59 2012] fullrun_mos1_xmm0651670201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 17 23:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651670201_pi300-10000_cl_pass0_src1.csv
[Sat Mar 17 23:56:59 2012] fullrun_mos1_xmm0651670201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 17 23:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651670201_pi300-10000_cl_pass0_src1.csv
[Sat Mar 17 23:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651670201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651670201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 23:57:00 2012] fullrun_mos1_xmm0651670201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 17 23:57:00 2012] fullrun_mos1_xmm0651670201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 17 23:57:00 2012] Fit fullrun_mos1_xmm0651670201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 01:28:54 2012] Spatial fit model total counts = 173401.000000, observed total counts = 178333.000000
[Sun Mar 18 01:28:54 2012] Offset between fit and detection position for source 1 = 0.229579 pixels
[Sun Mar 18 01:28:54 2012] 173051.000000 total counts/ 25600.000000 bgd. counts: snr = 921.568750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.229579 pixels
  Position = (282.0, 282.5) = 0 56 41.90 60 42 59.6
  Extent = 6.2 (6.1-6.2)", rotation angle = 0
  Source counts = 147451.0 +/- 416.0
  Background counts = 25600.0
  Rate = 8 +/- 0.02
[Sun Mar 18 01:28:54 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 01:28:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 01:28:54 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 01:28:54 2012] Source does appear to be extended
[Sun Mar 18 01:28:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 01:28:54 2012] Source is confused with source 2
[Sun Mar 18 01:41:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 01:41:22 2012] Initial guess for spatial extent in simple fitting = 6.16"
[Sun Mar 18 01:41:22 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.817
[Sun Mar 18 01:41:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.16"
[Sun Mar 18 02:49:19 2012] fullrun_mos1_xmm0651670201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 02:49:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651670201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 02:49:19 2012] fullrun_mos1_xmm0651670201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 02:49:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651670201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 02:49:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651670201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651670201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 02:49:19 2012] fullrun_mos1_xmm0651670201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 02:49:19 2012] fullrun_mos1_xmm0651670201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 02:49:19 2012] Fit fullrun_mos1_xmm0651670201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 03:34:32 2012] Spatial fit model total counts = 173372.000000, observed total counts = 178333.000000
[Sun Mar 18 03:34:32 2012] Offset between fit and detection position for source 1 = 0.000257 pixels
[Sun Mar 18 03:34:32 2012] 173023.000000 total counts/ 25600.000000 bgd. counts: snr = 921.393750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000257 pixels
  Position = (282.0, 282.5) = 0 56 41.90 60 42 59.6
  Extent = 6.2 (6.1-6.2)", rotation angle = 0
  Source counts = 147423.0 +/- 416.0
  Background counts = 25600.0
  Rate = 8 +/- 0.02
[Sun Mar 18 03:34:32 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 03:34:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 03:34:32 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 03:34:32 2012] Source does appear to be extended
[Sun Mar 18 03:34:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 03:55:24 2012] Counts = 147423.000000, rescaling region sizes by 3.000000
[Sun Mar 18 03:55:24 2012] XMMSAS src. selection expression = ellipse(24489.210920, 24525.563600, 1109.388632, 1109.388632, 0.000000, X, Y)
[Sun Mar 18 03:55:24 2012] Writing source region out to fullrun_mos1_xmm0651670201_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 18 03:55:24 2012] Extracting stamp from image fullrun_mos1_xmm0651670201_pi300-10000_cl_sm2.00.img.gz, (218, 219) - (346, 346)
[Sun Mar 18 03:55:24 2012] XMMSAS bgd. selection expression = annulus(24489.210920, 24525.563600, 5546.943160, 11093.886319, X, Y) && !ellipse(25086.248169, 25162.479370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23808.021484, 24754.178345, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24553.006775, 25302.038330, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 03:55:24 2012] Writing fullrun_mos1_xmm0651670201_pi300-10000_pass1_cl_src1.gif
[Sun Mar 18 03:55:50 2012] Mean detx,y = (299.96, -293.72) 
[Sun Mar 18 03:55:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 04:01:24 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 04:01:24 2012] Setting source spectrum file to fullrun_mos1_xmm0651670201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 04:01:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651670201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 18 06:28:59 2012] Updating aperture counts using extracted products
[Sun Mar 18 06:28:59 2012] Error reading totcts from fullrun_mos1_xmm0651670201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 06:28:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 06:28:59 2012] Using photon index=1.80, rate=8.38, arf fullrun_mos1_xmm0651670201_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 06:28:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 06:28:59 2012] Updating source flux to 9.4e-11
[Sun Mar 18 06:29:00 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Mar 18 06:29:21 2012] Reading fit data from xmm0651670201/analysis//spectral/fullrun_mos1_xmm0651670201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 18 06:29:21 2012] Spectral fit parameter nH value = 1.35128e+21
[Sun Mar 18 06:29:21 2012] Spectral fit parameter PhoIndex value = 1.49576
[Sun Mar 18 06:29:21 2012] Failed to get F(0.3-8.0) from xmm0651670201/analysis//spectral/fullrun_mos1_xmm0651670201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 18 06:29:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 06:29:21 2012] Using Nh = 1.4e+21, photon index=1.50, rate=8.38, arf fullrun_mos1_xmm0651670201_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 06:29:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 06:29:21 2012] Updating source flux to 1.1e-10