[Sun May 27 15:58:02 2012] Detection parameters:
  Position = (246.2, 383.9) = 4 23 19.94 -51 23 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1068.0 +/- 41.3
  Background counts = 129.2
  Rate = 0.01 +/- 0.0006

[Sun May 27 15:58:03 2012] Off-axis axis estimate = 7.26'
[Sun May 27 16:02:23 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:02:23 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Sun May 27 16:02:23 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Sun May 27 16:02:23 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.06"
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src6.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src6.csv
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src6.csv
[Sun May 27 17:52:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun May 27 17:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May 27 17:52:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:43 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.019342 pixels away
[Sun May 27 21:52:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:43 2012] Assessing source extent using major
[Sun May 27 21:52:43 2012] Source does appear to be extended
[Sun May 27 21:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:53:14 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:53:14 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Sun May 27 21:53:14 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Sun May 27 21:53:14 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.06"
[Sun May 27 23:27:28 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src6.ximg exists
[Sun May 27 23:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src6.csv
[Sun May 27 23:27:28 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun May 27 23:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src6.csv
[Sun May 27 23:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun May 27 23:27:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:10 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.019342 pixels away
[Mon May 28 02:04:10 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:10 2012] Assessing source extent using major
[Mon May 28 02:04:10 2012] Source does appear to be extended
[Mon May 28 02:04:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:04:36 2012] Counts = 1067.982056, rescaling region sizes by 2.000000
[Mon May 28 02:04:36 2012] XMMSAS src. selection expression = ellipse(21372.966675, 33347.754150, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 28 02:04:36 2012] Writing source region out to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src6_src.reg
[Mon May 28 02:04:36 2012] Extracting stamp from image fullrun_pn_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (171, 309) - (321, 459)
[Mon May 28 02:04:36 2012] XMMSAS bgd. selection expression = annulus(21372.966675, 33347.754150, 4350.000000, 8700.000000, X, Y) && !ellipse(28293.417358, 26105.413025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28358.048737, 26926.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26549.677000, 27792.205400, 376.758411, 376.758411, 0.000000, X, Y) && !ellipse(18288.281952, 26501.100006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28984.879913, 25832.810547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29872.825256, 34253.156311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30506.678986, 35837.008728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24902.100647, 35641.946381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19910.326965, 33690.568878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19325.584200, 31096.710400, 383.405611, 383.405611, 0.000000, X, Y) && !ellipse(20719.083405, 30646.152985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27954.046060, 30325.148000, 434.679213, 434.679213, 0.000000, X, Y) && !ellipse(14979.707901, 30130.917999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.051239, 28615.740570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28584.206787, 28427.132599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30315.451826, 28320.107600, 365.521611, 365.521611, 0.000000, X, Y) && !ellipse(29695.928619, 28201.903809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29235.214661, 27664.013458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30340.333435, 27281.115753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25973.232391, 26464.181824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20623.560760, 26058.408386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.473580, 25936.421400, 404.204012, 404.204012, 0.000000, X, Y) && !ellipse(30775.545837, 25340.153931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.019348, 24948.797302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27668.465942, 24529.538971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.783905, 24418.213593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30036.431600, 24513.708400, 542.216816, 542.216816, 0.000000, X, Y) && !ellipse(28452.886383, 24575.505493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.677429, 23923.472778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19620.916824, 23818.784973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12345.452881, 23789.274323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20833.257629, 42077.015228, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 02:04:36 2012] Writing fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src6.gif
[Mon May 28 02:13:10 2012] Mean detx,y = (-7100.89, 7677.60) 
[Mon May 28 02:13:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:15:33 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:15:33 2012] Setting source spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon May 28 02:15:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon May 28 02:47:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 02:47:29 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:30 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:30 2012] Error reading totcts from fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon May 28 06:03:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:31 2012] Using photon index=1.80, rate=0.0149, arf fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src6.arf
[Mon May 28 06:03:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:31 2012] Updating source flux to 6.5e-14
[Mon May 28 06:06:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting