[Sun May 27 15:58:03 2012] Detection parameters:
  Position = (318.6, 282.5) = 4 22 46.29 -51 30 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.7 +/- 24.0
  Background counts = 238.7
  Rate = 0.002 +/- 0.0004

[Sun May 27 15:58:03 2012] Off-axis axis estimate = 1.86'
[Sun May 27 16:02:23 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:02:23 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun May 27 16:02:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.301
[Sun May 27 16:02:23 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 7.36"
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src46.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src46.csv
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src46.csv
[Sun May 27 17:52:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:52:04 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun May 27 17:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sun May 27 17:52:04 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun May 27 17:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sun May 27 17:52:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:43 2012] Warning, spatial fit 46 centroid is now closest to src. 44
[Sun May 27 21:52:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:43 2012] Assessing source extent using major
[Sun May 27 21:52:43 2012] Source does appear to be extended
[Sun May 27 21:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:52:43 2012] Source is confused with source 44
[Sun May 27 21:53:14 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:53:14 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun May 27 21:53:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.301
[Sun May 27 21:53:14 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 7.36"
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src46.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src46.csv
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src46_1.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src46.csv
[Sun May 27 23:27:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:27:30 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sun May 27 23:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sun May 27 23:27:30 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sun May 27 23:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sun May 27 23:27:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:10 2012] Source 46 is offset by 6.470574 and 6.273712 pixels which is larger than
2 X fitted extent = 2.669563 x 6.767540, not incorporating fit results
[Mon May 28 02:04:10 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:10 2012] Assessing source extent using major
[Mon May 28 02:04:10 2012] Source does appear to be extended
[Mon May 28 02:04:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:04:37 2012] XMMSAS src. selection expression = ellipse(27668.465942, 24529.538971, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 02:04:37 2012] Writing source region out to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src46_src.reg
[Mon May 28 02:04:37 2012] Extracting stamp from image fullrun_pn_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (281, 245) - (356, 320)
[Mon May 28 02:04:38 2012] XMMSAS bgd. selection expression = annulus(27668.465942, 24529.538971, 1087.500000, 2175.000000, X, Y) && !ellipse(28293.417358, 26105.413025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28358.048737, 26926.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28984.879913, 25832.810547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30340.333435, 27281.115753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25973.232391, 26464.181824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.473580, 25936.421400, 404.204012, 404.204012, 0.000000, X, Y) && !ellipse(28094.019348, 24948.797302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.783905, 24418.213593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30036.431600, 24513.708400, 542.216816, 542.216816, 0.000000, X, Y) && !ellipse(28452.886383, 24575.505493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.677429, 23923.472778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.997345, 23617.435516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.469696, 22671.193695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.576400, 22554.166820, 459.284813, 459.284813, 0.000000, X, Y) && !ellipse(26568.381104, 21731.354477, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 02:04:38 2012] Writing fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src46.gif
[Mon May 28 02:33:33 2012] Mean detx,y = (-178.48, -490.92) 
[Mon May 28 02:33:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:33:45 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:33:45 2012] Setting source spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon May 28 02:33:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Mon May 28 03:11:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 03:11:17 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:31 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:31 2012] Error reading totcts from fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon May 28 06:03:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:32 2012] Using photon index=1.80, rate=0.00197, arf fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src46.arf
[Mon May 28 06:03:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:32 2012] Updating source flux to 4.9e-15
[Mon May 28 06:06:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting