[Sun May 27 15:58:02 2012] Detection parameters:
  Position = (354.3, 291.8) = 4 22 29.65 -51 30 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.2 +/- 24.2
  Background counts = 214.7
  Rate = 0.003 +/- 0.0005

[Sun May 27 15:58:03 2012] Off-axis axis estimate = 4.08'
[Sun May 27 16:02:23 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:02:23 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Sun May 27 16:02:23 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Sun May 27 16:02:23 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.47"
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src43.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src43.csv
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src43.csv
[Sun May 27 17:52:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:52:04 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun May 27 17:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun May 27 17:52:04 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun May 27 17:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun May 27 17:52:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:43 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 10.929867 pixels away
[Sun May 27 21:52:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:43 2012] Assessing source extent using major
[Sun May 27 21:52:43 2012] Source does appear to be extended
[Sun May 27 21:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:53:14 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:53:14 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Sun May 27 21:53:14 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Sun May 27 21:53:14 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 8.47"
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src43.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src43.csv
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src43.csv
[Sun May 27 23:27:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:27:30 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun May 27 23:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May 27 23:27:30 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun May 27 23:27:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May 27 23:27:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:10 2012] Source 43 is offset by 0.752184 and 2.034703 pixels which is larger than
2 X fitted extent = 1.963899 x 1.963899, not incorporating fit results
[Mon May 28 02:04:10 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:10 2012] Assessing source extent using major
[Mon May 28 02:04:10 2012] Source does appear to be extended
[Mon May 28 02:04:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:04:37 2012] XMMSAS src. selection expression = ellipse(30775.545837, 25340.153931, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 02:04:37 2012] Writing source region out to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src43_src.reg
[Mon May 28 02:04:37 2012] Extracting stamp from image fullrun_pn_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (317, 254) - (392, 329)
[Mon May 28 02:04:37 2012] XMMSAS bgd. selection expression = annulus(30775.545837, 25340.153931, 1087.500000, 2175.000000, X, Y) && !ellipse(28293.417358, 26105.413025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28358.048737, 26926.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31345.992157, 27211.216797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28984.879913, 25832.810547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30844.873962, 23300.693176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29695.928619, 28201.903809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29235.214661, 27664.013458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30340.333435, 27281.115753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.019348, 24948.797302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.783905, 24418.213593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30036.431600, 24513.708400, 542.216816, 542.216816, 0.000000, X, Y) && !ellipse(28452.886383, 24575.505493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.677429, 23923.472778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.997345, 23617.435516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32302.516907, 23093.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.469696, 22671.193695, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 02:04:37 2012] Writing fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src43.gif
[Mon May 28 02:32:38 2012] Mean detx,y = (-1572.81, -3336.77) 
[Mon May 28 02:32:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:32:53 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:32:53 2012] Setting source spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon May 28 02:32:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon May 28 03:06:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 03:06:50 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:31 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:31 2012] Error reading totcts from fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon May 28 06:03:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:32 2012] Using photon index=1.80, rate=0.00258, arf fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src43.arf
[Mon May 28 06:03:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:32 2012] Updating source flux to 8.1e-15
[Mon May 28 06:06:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting