[Sun May 27 15:58:02 2012] Detection parameters:
  Position = (325.8, 300.6) = 4 22 42.95 -51 29 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2284.6 +/- 75.3
  Background counts = 245.2
  Rate = 0.05 +/- 0.002

[Sun May 27 15:58:03 2012] Off-axis axis estimate = 1.99'
[Sun May 27 16:02:23 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:02:23 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Sun May 27 16:02:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.873
[Sun May 27 16:02:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.42"
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src3.csv
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src3.csv
[Sun May 27 17:52:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 27 17:52:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:43 2012] Warning, spatial fit 3 centroid is now closest to src. 37
[Sun May 27 21:52:43 2012] Source 3 is offset by 2.920734 and 6.176770 pixels which is larger than
2 X fitted extent = 4.495035 x 4.495035, not incorporating fit results
[Sun May 27 21:52:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:43 2012] Assessing source extent using major
[Sun May 27 21:52:43 2012] Source does appear to be extended
[Sun May 27 21:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:53:14 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:53:14 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Sun May 27 21:53:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.873
[Sun May 27 21:53:14 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.42"
[Sun May 27 23:27:28 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 27 23:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src3.csv
[Sun May 27 23:27:28 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 27 23:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src3.csv
[Sun May 27 23:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 27 23:27:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:10 2012] Warning, spatial fit 3 centroid is now closest to src. 37
[Mon May 28 02:04:10 2012] Source 3 is offset by 3.060399 and 5.795184 pixels which is larger than
2 X fitted extent = 4.295451 x 5.673221, not incorporating fit results
[Mon May 28 02:04:10 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:10 2012] Assessing source extent using major
[Mon May 28 02:04:10 2012] Source does appear to be extended
[Mon May 28 02:04:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:04:36 2012] Counts = 2284.612793, rescaling region sizes by 2.000000
[Mon May 28 02:04:36 2012] XMMSAS src. selection expression = ellipse(28293.417358, 26105.413025, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 28 02:04:36 2012] Writing source region out to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src3_src.reg
[Mon May 28 02:04:36 2012] Extracting stamp from image fullrun_pn_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (251, 226) - (401, 376)
[Mon May 28 02:04:36 2012] XMMSAS bgd. selection expression = annulus(28293.417358, 26105.413025, 4350.000000, 8700.000000, X, Y) && !ellipse(24905.845000, 20521.826400, 1307.767238, 1307.767238, 0.000000, X, Y) && !ellipse(28358.048737, 26926.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21372.966675, 33347.754150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34622.392000, 31967.274000, 271.951208, 271.951208, 0.000000, X, Y) && !ellipse(26549.677000, 27792.205400, 376.758411, 376.758411, 0.000000, X, Y) && !ellipse(31345.992157, 27211.216797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28984.879913, 25832.810547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30844.873962, 23300.693176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19125.380829, 21040.210526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26369.646851, 19990.069443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24479.426000, 19115.100000, 465.683213, 465.683213, 0.000000, X, Y) && !ellipse(29872.825256, 34253.156311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24902.100647, 35641.946381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33921.997162, 34698.009125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19910.326965, 33690.568878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35190.567505, 31419.632050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19325.584200, 31096.710400, 383.405611, 383.405611, 0.000000, X, Y) && !ellipse(20719.083405, 30646.152985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27954.046060, 30325.148000, 434.679213, 434.679213, 0.000000, X, Y) && !ellipse(35407.762177, 29119.139435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.051239, 28615.740570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28584.206787, 28427.132599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30315.451826, 28320.107600, 365.521611, 365.521611, 0.000000, X, Y) && !ellipse(29695.928619, 28201.903809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29235.214661, 27664.013458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30340.333435, 27281.115753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25973.232391, 26464.181824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20623.560760, 26058.408386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.473580, 25936.421400, 404.204012, 404.204012, 0.000000, X, Y) && !ellipse(30775.545837, 25340.153931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.019348, 24948.797302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27668.465942, 24529.538971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.783905, 24418.213593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30036.431600, 24513.708400, 542.216816, 542.216816, 0.000000, X, Y) && !ellipse(28452.886383, 24575.505493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.677429, 23923.472778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19620.916824, 23818.784973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.997345, 23617.435516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32302.516907, 23093.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.469696, 22671.193695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.576400, 22554.166820, 459.284813, 459.284813, 0.000000, X, Y) && !ellipse(26568.381104, 21731.354477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32818.755493, 21406.851486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36964.703217, 19707.720352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32671.263306, 19121.751404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.647858, 19164.223907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24233.120196, 18660.748197, 452.954441, 290.244595, 41.961495, X, Y) && !ellipse(25342.940160, 17949.532000, 365.129611, 365.129611, 0.000000, X, Y) && !ellipse(25844.131592, 17615.883835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27145.058777, 17025.962875, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 02:04:36 2012] Writing fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src3.gif
[Mon May 28 02:07:42 2012] Mean detx,y = (-1897.62, -687.56) 
[Mon May 28 02:07:46 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:09:18 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:09:18 2012] Setting source spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 02:09:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 28 02:46:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 02:46:11 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:30 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:30 2012] Error reading totcts from fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 06:03:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:31 2012] Using photon index=1.80, rate=0.0534, arf fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src3.arf
[Mon May 28 06:03:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:31 2012] Updating source flux to 1.9e-13
[Mon May 28 06:06:37 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting