[Sun May 27 15:58:02 2012] Detection parameters:
  Position = (286.8, 236.2) = 4 23 1.10 -51 34 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33336.5 +/- 219.8
  Background counts = 164.6
  Rate = 0.6 +/- 0.004

[Sun May 27 15:58:03 2012] Off-axis axis estimate = 4.59'
[Sun May 27 16:02:23 2012] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:02:23 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Sun May 27 16:02:23 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.996
[Sun May 27 16:02:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.72"
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 17:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 17:52:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 17:52:03 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 17:52:03 2012] Fit fullrun_pn_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 21:52:43 2012] Spatial fit model total counts = 30133.200000, observed total counts = 28307.000000
[Sun May 27 21:52:43 2012] Offset between fit and detection position for source 1 = 0.214029 pixels
[Sun May 27 21:52:43 2012] 30234.020000 total counts/ 8315.220000 bgd. counts: snr = 240.369800
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.214029 pixels
  Position = (286.8, 236.4) = 4 23 1.09 -51 34 4.2
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 21918.8 +/- 173.9
  Background counts = 8315.2
  Rate = 0.3 +/- 0.003
[Sun May 27 21:52:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 21:52:43 2012] Source does appear to be extended
[Sun May 27 21:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:53:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:53:14 2012] Initial guess for spatial extent in simple fitting = 5.45"
[Sun May 27 21:53:14 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.977
[Sun May 27 21:53:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.45"
[Sun May 27 23:27:28 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 23:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src1.csv
[Sun May 27 23:27:28 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 23:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src1.csv
[Sun May 27 23:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 27 23:27:29 2012] fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 23:27:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 27 23:27:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:10 2012] Warning, spatial fit 1 centroid is now closest to src. 16
[Mon May 28 02:04:10 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:10 2012] Assessing source extent using major axis lower bound
[Mon May 28 02:04:10 2012] Source does appear to be extended
[Mon May 28 02:04:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:04:36 2012] Counts = 21918.800000, rescaling region sizes by 3.000000
[Mon May 28 02:04:36 2012] XMMSAS src. selection expression = ellipse(24905.845000, 20521.826400, 980.825428, 980.825428, 0.000000, X, Y)
[Mon May 28 02:04:36 2012] Writing source region out to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 02:04:36 2012] Extracting stamp from image fullrun_pn_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (230, 180) - (343, 293)
[Mon May 28 02:04:36 2012] XMMSAS bgd. selection expression = annulus(24905.845000, 20521.826400, 4904.127141, 9808.254282, X, Y) && !ellipse(28293.417358, 26105.413025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28358.048737, 26926.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31425.401428, 12822.767410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26549.677000, 27792.205400, 376.758411, 376.758411, 0.000000, X, Y) && !ellipse(31345.992157, 27211.216797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18288.281952, 26501.100006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28984.879913, 25832.810547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30844.873962, 23300.693176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19125.380829, 21040.210526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26369.646851, 19990.069443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24479.426000, 19115.100000, 465.683213, 465.683213, 0.000000, X, Y) && !ellipse(16421.018433, 18026.517303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20719.083405, 30646.152985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27954.046060, 30325.148000, 434.679213, 434.679213, 0.000000, X, Y) && !ellipse(14979.707901, 30130.917999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35407.762177, 29119.139435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27906.051239, 28615.740570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28584.206787, 28427.132599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30315.451826, 28320.107600, 365.521611, 365.521611, 0.000000, X, Y) && !ellipse(29695.928619, 28201.903809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29235.214661, 27664.013458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30340.333435, 27281.115753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25973.232391, 26464.181824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20623.560760, 26058.408386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.473580, 25936.421400, 404.204012, 404.204012, 0.000000, X, Y) && !ellipse(30775.545837, 25340.153931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.019348, 24948.797302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27668.465942, 24529.538971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.783905, 24418.213593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30036.431600, 24513.708400, 542.216816, 542.216816, 0.000000, X, Y) && !ellipse(28452.886383, 24575.505493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.677429, 23923.472778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19620.916824, 23818.784973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.997345, 23617.435516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32302.516907, 23093.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.469696, 22671.193695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.576400, 22554.166820, 459.284813, 459.284813, 0.000000, X, Y) && !ellipse(26568.381104, 21731.354477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32818.755493, 21406.851486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32671.263306, 19121.751404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.647858, 19164.223907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24233.120196, 18660.748197, 452.954441, 290.244595, 41.961495, X, Y) && !ellipse(25342.940160, 17949.532000, 365.129611, 365.129611, 0.000000, X, Y) && !ellipse(25844.131592, 17615.883835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27145.058777, 17025.962875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15920.078125, 15253.624619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23474.377228, 13251.305069, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 02:04:36 2012] Writing fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src1.gif
[Mon May 28 02:04:58 2012] Mean detx,y = (4411.62, 1151.83) 
[Mon May 28 02:05:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:06:50 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:06:50 2012] Setting source spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 02:06:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 06:03:30 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:30 2012] Error reading totcts from fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 06:03:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:31 2012] Using photon index=1.80, rate=0.327, arf fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 06:03:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:31 2012] Updating source flux to 8.7e-13
[Mon May 28 06:07:27 2012] Reading fit data from xmm0651580101/analysis//spectral/fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 06:07:27 2012] Spectral fit parameter nH value = 2.33477e+13
[Mon May 28 06:07:27 2012] Spectral fit parameter PhoIndex value = 1.95153
[Mon May 28 06:07:27 2012] Failed to get F(0.3-8.0) from xmm0651580101/analysis//spectral/fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 06:07:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:07:27 2012] Using Nh = 2.3e+13, photon index=1.95, rate=0.327, arf fullrun_pn_xmm0651580101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 06:07:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:07:27 2012] Updating source flux to 7.9e-13