[Sun May 27 15:59:10 2012] Detection parameters:
  Position = (360.9, 313.8) = 4 22 26.58 -51 28 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 356.2 +/- 25.4
  Background counts = 56.3
  Rate = 0.006 +/- 0.0005

[Sun May 27 15:59:10 2012] Off-axis axis estimate = 4.66'
[Sun May 27 19:47:09 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Sun May 27 19:47:09 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Sun May 27 19:47:09 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Sun May 27 19:47:09 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.76"
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src5.ximg exists
[Sun May 27 21:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src5.csv
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun May 27 21:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src5.csv
[Sun May 27 21:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May 27 21:52:30 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun May 27 21:53:00 2012] Warning, spatial fit 5 centroid is now closest to src. 33
[Sun May 27 21:53:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:53:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:53:00 2012] Assessing source extent using major
[Sun May 27 21:53:00 2012] Source does appear to be extended
[Sun May 27 21:53:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 00:47:55 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Mon May 28 00:47:55 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Mon May 28 00:47:55 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Mon May 28 00:47:55 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.76"
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 28 02:04:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src5.csv
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 28 02:04:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src5.csv
[Mon May 28 02:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 28 02:04:00 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon May 28 02:04:21 2012] Spatial fit model total counts = 961.557000, observed total counts = 960.000000
[Mon May 28 02:04:21 2012] Offset between fit and detection position for source 6 = 0.169021 pixels
[Mon May 28 02:04:21 2012] 955.518000 total counts/ 754.469000 bgd. counts: snr = 7.319497
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.169021 pixels
  Position = (360.8, 313.7) = 4 22 26.65 -51 28 28.0
  Extent = 4.2 (3.6-5.0)", rotation angle = 0
  Source counts = 201.0 +/- 30.9
  Background counts = 754.5
  Rate = 0.003 +/- 0.0004
[Mon May 28 02:04:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:21 2012] Assessing source extent using major axis lower bound
[Mon May 28 02:04:21 2012] Source does appear to be extended
[Mon May 28 02:04:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 04:46:14 2012] XMMSAS src. selection expression = ellipse(31339.545800, 27241.021200, 251.158207, 251.158207, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing source region out to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src6_src.reg
[Mon May 28 04:46:14 2012] Extracting stamp from image fullrun_mos2_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (346, 299) - (375, 328)
[Mon May 28 04:46:14 2012] XMMSAS bgd. selection expression = annulus(31339.545800, 27241.021200, 418.597012, 837.194024, X, Y) && !ellipse(30154.798000, 25839.758000, 1295.776037, 1295.776037, 0.000000, X, Y) && !ellipse(30080.376862, 26656.456390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30455.585602, 26044.519928, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src6.gif
[Mon May 28 04:48:25 2012] Mean detx,y = (3815.43, 3292.56) 
[Mon May 28 04:48:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 04:48:30 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 04:48:30 2012] Setting source spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon May 28 04:48:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon May 28 06:03:33 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:33 2012] Error reading totcts from fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon May 28 06:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:33 2012] Using photon index=1.80, rate=0.00282, arf fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src6.arf
[Mon May 28 06:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:33 2012] Updating source flux to 5.2e-14