[Sun May 27 15:59:10 2012] Detection parameters:
  Position = (188.8, 210.3) = 4 23 46.88 -51 35 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.7 +/- 16.3
  Background counts = 27.2
  Rate = 0.003 +/- 0.0004

[Sun May 27 15:59:10 2012] Off-axis axis estimate = 10.20'
[Sun May 27 19:47:09 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Sun May 27 19:47:09 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Sun May 27 19:47:09 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.907
[Sun May 27 19:47:09 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 11.53"
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src15.ximg exists
[Sun May 27 21:52:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src15.csv
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun May 27 21:52:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src15.csv
[Sun May 27 21:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun May 27 21:52:30 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun May 27 21:53:00 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 11.183522 pixels away
[Sun May 27 21:53:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:53:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:53:00 2012] Assessing source extent using major
[Sun May 27 21:53:00 2012] Source does appear to be extended
[Sun May 27 21:53:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 00:47:55 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Mon May 28 00:47:55 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Mon May 28 00:47:55 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.907
[Mon May 28 00:47:55 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 11.53"
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src15.csv
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src15.csv
[Mon May 28 02:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 28 02:04:00 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon May 28 02:04:21 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 15.042211 pixels away
[Mon May 28 02:04:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:21 2012] Assessing source extent using major
[Mon May 28 02:04:21 2012] Source does appear to be extended
[Mon May 28 02:04:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 04:46:14 2012] XMMSAS src. selection expression = ellipse(16373.440308, 18243.883224, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing source region out to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src59_src.reg
[Mon May 28 04:46:14 2012] Extracting stamp from image fullrun_mos2_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (151, 173) - (226, 248)
[Mon May 28 04:46:14 2012] XMMSAS bgd. selection expression = annulus(16373.440308, 18243.883224, 1087.500000, 2175.000000, X, Y) && !ellipse(13715.572784, 19874.311493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19174.956863, 21170.456970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15904.061661, 15273.906387, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src59.gif
[Mon May 28 04:50:21 2012] Mean detx,y = (-8634.90, -8927.92) 
[Mon May 28 04:50:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 04:50:27 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 04:50:27 2012] Setting source spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Mon May 28 04:50:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Mon May 28 05:40:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 05:40:57 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:33 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:33 2012] Error reading totcts from fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Mon May 28 06:03:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:34 2012] Using photon index=1.80, rate=0.00329, arf fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src59.arf
[Mon May 28 06:03:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:34 2012] Updating source flux to 5.9e-14
[Mon May 28 06:05:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting