[Sun May 27 15:59:10 2012] Detection parameters:
  Position = (325.9, 295.7) = 4 22 42.88 -51 29 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.4 +/- 24.8
  Background counts = 70.1
  Rate = 0.004 +/- 0.0004

[Sun May 27 15:59:10 2012] Off-axis axis estimate = 2.00'
[Sun May 27 19:47:09 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Sun May 27 19:47:09 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Sun May 27 19:47:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.821
[Sun May 27 19:47:09 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.43"
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src9.ximg exists
[Sun May 27 21:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src9.csv
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun May 27 21:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src9.csv
[Sun May 27 21:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May 27 21:52:30 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun May 27 21:53:00 2012] Spatial fit model total counts = 3200.410000, observed total counts = 3129.000000
[Sun May 27 21:53:00 2012] Offset between fit and detection position for source 40 = 8.112950 pixels
[Sun May 27 21:53:00 2012] 3208.691000 total counts/ 2910.000000 bgd. counts: snr = 5.537014
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 8.112950 pixels
  Position = (321.1, 289.2) = 4 22 45.10 -51 30 14.8
  Extent = 14.9 (14.8-29.7)", rotation angle = 0
  Source counts = 298.7 +/- 56.6
  Background counts = 2910.0
  Rate = 0.004 +/- 0.0008
[Sun May 27 21:53:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:53:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:53:00 2012] Assessing source extent using major axis lower bound
[Sun May 27 21:53:00 2012] Source does appear to be extended
[Sun May 27 21:53:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:53:00 2012] Source is confused with source 7
[Mon May 28 00:47:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 00:47:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 00:47:55 2012] Initial guess for spatial extent in simple fitting = 14.86"
[Mon May 28 00:47:55 2012] source mask rpix=3.4, npix_max = 61, mask sum = 48, frac = 0.783
[Mon May 28 00:47:55 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 14.86"
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src9.ximg exists
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon May 28 02:04:00 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src9 appears to have run properly
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May 28 02:04:00 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon May 28 02:04:21 2012] Spatial fit model total counts = -46.664900, observed total counts = 3849.000000
[Mon May 28 02:04:21 2012] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 02:04:21 2012] Source 40 is offset by -1.628092 and -2.603724 pixels which is larger than
2 X fitted extent = 2.272460 x 2.272460, not incorporating fit results
[Mon May 28 02:04:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:21 2012] Assessing source extent using major axis lower bound
[Mon May 28 02:04:21 2012] Source does appear to be extended
[Mon May 28 02:04:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 04:46:14 2012] XMMSAS src. selection expression = ellipse(27891.060000, 25109.180000, 891.480026, 891.480026, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing source region out to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src40_src.reg
[Mon May 28 04:46:14 2012] Extracting stamp from image fullrun_mos2_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (270, 238) - (372, 340)
[Mon May 28 04:46:14 2012] XMMSAS bgd. selection expression = annulus(27891.060000, 25109.180000, 1485.800043, 2971.600086, X, Y) && !ellipse(28435.038600, 26435.229200, 817.880024, 817.880024, 0.000000, X, Y) && !ellipse(28537.970000, 26147.324000, 1235.648036, 1235.648036, 0.000000, X, Y) && !ellipse(30902.443200, 23103.254200, 364.838410, 364.838410, 0.000000, X, Y) && !ellipse(26554.023460, 27822.877600, 296.024009, 296.024009, 0.000000, X, Y) && !ellipse(28558.068000, 27245.320000, 930.424027, 930.424027, 0.000000, X, Y) && !ellipse(26405.412750, 25972.892548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28991.764404, 25485.729187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.962460, 22561.214400, 363.111359, 363.111359, 0.000000, X, Y) && !ellipse(28740.919891, 25010.277161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27714.846000, 26976.239270, 1238.688036, 1238.688036, 346.677505, X, Y) && !ellipse(30154.798000, 25839.758000, 1295.776037, 1295.776037, 0.000000, X, Y) && !ellipse(28955.196686, 27781.604706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29375.509064, 27606.699341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30734.161896, 25057.478271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.519470, 25026.265747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30080.376862, 26656.456390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28001.226074, 28541.232483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30455.585602, 26044.519928, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src40.gif
[Mon May 28 04:49:12 2012] Mean detx,y = (1044.92, 505.33) 
[Mon May 28 04:49:13 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 04:49:20 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 04:49:20 2012] Setting source spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon May 28 04:49:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon May 28 06:03:33 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:33 2012] Error reading totcts from fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon May 28 06:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:33 2012] Using photon index=1.80, rate=0.00419, arf fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src40.arf
[Mon May 28 06:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:33 2012] Updating source flux to 3.9e-14
[Mon May 28 06:05:09 2012] Flag b found in src. 40 procflags, skipping spectral fitting
[Mon May 28 06:05:09 2012] Flag p found in src. 40 procflags, skipping spectral fitting
[Mon May 28 06:05:09 2012] Flag c found in src. 40 procflags, skipping spectral fitting