[Sun May 27 15:59:10 2012] Detection parameters:
  Position = (327.4, 304.1) = 4 22 42.18 -51 29 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2739.3 +/- 64.8
  Background counts = 70.8
  Rate = 0.04 +/- 0.001

[Sun May 27 15:59:10 2012] Off-axis axis estimate = 2.14'
[Sun May 27 19:47:09 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sun May 27 19:47:09 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Sun May 27 19:47:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.011
[Sun May 27 19:47:09 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.50"
[Sun May 27 21:52:29 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src2.ximg exists
[Sun May 27 21:52:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src2.csv
[Sun May 27 21:52:29 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May 27 21:52:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src2.csv
[Sun May 27 21:52:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 27 21:52:30 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun May 27 21:53:00 2012] Spatial fit model total counts = 5958.140000, observed total counts = 5942.000000
[Sun May 27 21:53:00 2012] Offset between fit and detection position for source 3 = 0.306258 pixels
[Sun May 27 21:53:00 2012] 6021.660000 total counts/ 3464.610000 bgd. counts: snr = 43.442223
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.306258 pixels
  Position = (327.4, 304.4) = 4 22 42.19 -51 29 8.5
  Extent = 10.1 (9.5-10.5)", rotation angle = 0
  Source counts = 2557.1 +/- 77.6
  Background counts = 3464.6
  Rate = 0.04 +/- 0.001
[Sun May 27 21:53:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:53:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:53:00 2012] Assessing source extent using major axis lower bound
[Sun May 27 21:53:00 2012] Source does appear to be extended
[Sun May 27 21:53:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:53:00 2012] Source is confused with source 28
[Sun May 27 21:53:00 2012] Source is confused with source 31
[Mon May 28 00:47:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 00:47:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 00:47:55 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Mon May 28 00:47:55 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.790
[Mon May 28 00:47:55 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.06"
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src2.csv
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src2.csv
[Mon May 28 02:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 28 02:04:00 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon May 28 02:04:21 2012] Spatial fit model total counts = 5936.620000, observed total counts = 5942.000000
[Mon May 28 02:04:21 2012] Offset between fit and detection position for source 3 = 0.004025 pixels
[Mon May 28 02:04:21 2012] 5999.520000 total counts/ 3420.500000 bgd. counts: snr = 44.097088
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.004025 pixels
  Position = (327.4, 304.4) = 4 22 42.19 -51 29 8.5
  Extent = 10.2 (9.5-10.8)", rotation angle = 0
  Source counts = 2579.0 +/- 77.5
  Background counts = 3420.5
  Rate = 0.04 +/- 0.001
[Mon May 28 02:04:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:21 2012] Assessing source extent using major axis lower bound
[Mon May 28 02:04:21 2012] Source does appear to be extended
[Mon May 28 02:04:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 04:46:14 2012] Counts = 2579.020000, rescaling region sizes by 2.000000
[Mon May 28 04:46:14 2012] XMMSAS src. selection expression = ellipse(28435.038600, 26435.229200, 1226.820035, 1226.820035, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing source region out to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src3_src.reg
[Mon May 28 04:46:14 2012] Extracting stamp from image fullrun_mos2_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (257, 234) - (398, 375)
[Mon May 28 04:46:14 2012] XMMSAS bgd. selection expression = annulus(28435.038600, 26435.229200, 4089.400118, 8178.800235, X, Y) && !ellipse(24902.074000, 20524.489600, 414.612812, 414.612812, 0.000000, X, Y) && !ellipse(29837.560271, 34283.781142, 532.076439, 412.884264, 351.860558, X, Y) && !ellipse(21372.195320, 33299.720000, 650.548819, 311.444809, 320.520939, X, Y) && !ellipse(31339.545800, 27241.021200, 334.877610, 334.877610, 0.000000, X, Y) && !ellipse(28537.970000, 26147.324000, 1235.648036, 1235.648036, 0.000000, X, Y) && !ellipse(30902.443200, 23103.254200, 364.838410, 364.838410, 0.000000, X, Y) && !ellipse(27891.060000, 25109.180000, 1188.640034, 1188.640034, 0.000000, X, Y) && !ellipse(26391.879989, 19834.995717, 277.122802, 256.785044, 0.000000, X, Y) && !ellipse(24485.884776, 19224.350200, 386.864011, 386.864011, 0.000000, X, Y) && !ellipse(26554.023460, 27822.877600, 296.024009, 296.024009, 0.000000, X, Y) && !ellipse(28558.068000, 27245.320000, 930.424027, 930.424027, 0.000000, X, Y) && !ellipse(26405.412750, 25972.892548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28991.764404, 25485.729187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.962460, 22561.214400, 363.111359, 363.111359, 0.000000, X, Y) && !ellipse(20770.796600, 30629.041200, 414.554412, 414.554412, 0.000000, X, Y) && !ellipse(28740.919891, 25010.277161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21043.186600, 20864.359600, 296.418409, 296.418409, 0.000000, X, Y) && !ellipse(29353.470800, 31850.287000, 298.287299, 298.287299, 0.000000, X, Y) && !ellipse(27714.846000, 26976.239270, 1238.688036, 1238.688036, 346.677505, X, Y) && !ellipse(25053.863200, 28942.288200, 295.797609, 295.797609, 0.000000, X, Y) && !ellipse(26774.066223, 18392.000671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30154.798000, 25839.758000, 1295.776037, 1295.776037, 0.000000, X, Y) && !ellipse(28955.196686, 27781.604706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29375.509064, 27606.699341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32801.869507, 21409.332611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35441.839478, 29071.293152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32304.200195, 23116.983734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30734.161896, 25057.478271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.519470, 25026.265747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30080.376862, 26656.456390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28001.226074, 28541.232483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19530.426788, 23795.564087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34615.615601, 32044.817108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30455.585602, 26044.519928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32257.803558, 34279.611023, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src3.gif
[Mon May 28 04:46:43 2012] Mean detx,y = (2351.72, 637.54) 
[Mon May 28 04:46:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 04:48:02 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 04:48:02 2012] Setting source spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 04:48:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 28 06:03:33 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:33 2012] Error reading totcts from fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 06:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:33 2012] Using photon index=1.80, rate=0.0362, arf fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src3.arf
[Mon May 28 06:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:33 2012] Updating source flux to 3.4e-13
[Mon May 28 06:05:09 2012] Flag c found in src. 3 procflags, skipping spectral fitting