[Sun May 27 15:59:10 2012] Detection parameters:
  Position = (322.4, 328.6) = 4 22 44.52 -51 27 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.5 +/- 15.0
  Background counts = 63.3
  Rate = 0.001 +/- 0.0002

[Sun May 27 15:59:10 2012] Off-axis axis estimate = 2.79'
[Sun May 27 19:47:09 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sun May 27 19:47:09 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Sun May 27 19:47:09 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.182
[Sun May 27 19:47:09 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 7.83"
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src54.ximg exists
[Sun May 27 21:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src54.csv
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun May 27 21:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src54.csv
[Sun May 27 21:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:31 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun May 27 21:52:31 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun May 27 21:52:31 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Sun May 27 21:53:00 2012] Source 25 is offset by 2.144913 and 5.579730 pixels which is larger than
2 X fitted extent = 1.703503 x 1.703503, not incorporating fit results
[Sun May 27 21:53:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:53:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:53:00 2012] Assessing source extent using major
[Sun May 27 21:53:00 2012] Source does appear to be extended
[Sun May 27 21:53:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 00:47:55 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Mon May 28 00:47:55 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Mon May 28 00:47:55 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.182
[Mon May 28 00:47:55 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 7.83"
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src46.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src46.csv
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src46_1.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src46.csv
[Mon May 28 02:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:01 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Mon May 28 02:04:01 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Mon May 28 02:04:01 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Mon May 28 02:04:21 2012] Source 25 is offset by 2.179543 and 5.596075 pixels which is larger than
2 X fitted extent = 1.815117 x 1.815117, not incorporating fit results
[Mon May 28 02:04:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:21 2012] Assessing source extent using major
[Mon May 28 02:04:21 2012] Source does appear to be extended
[Mon May 28 02:04:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 04:46:15 2012] XMMSAS src. selection expression = ellipse(28001.226074, 28541.232483, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 04:46:15 2012] Writing source region out to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src25_src.reg
[Mon May 28 04:46:15 2012] Extracting stamp from image fullrun_mos2_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (285, 291) - (360, 366)
[Mon May 28 04:46:15 2012] XMMSAS bgd. selection expression = annulus(28001.226074, 28541.232483, 1087.500000, 2175.000000, X, Y) && !ellipse(28435.038600, 26435.229200, 817.880024, 817.880024, 0.000000, X, Y) && !ellipse(28537.970000, 26147.324000, 1235.648036, 1235.648036, 0.000000, X, Y) && !ellipse(26554.023460, 27822.877600, 296.024009, 296.024009, 0.000000, X, Y) && !ellipse(28558.068000, 27245.320000, 930.424027, 930.424027, 0.000000, X, Y) && !ellipse(26405.412750, 25972.892548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27714.846000, 26976.239270, 1238.688036, 1238.688036, 346.677505, X, Y) && !ellipse(30154.798000, 25839.758000, 1295.776037, 1295.776037, 0.000000, X, Y) && !ellipse(28955.196686, 27781.604706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29375.509064, 27606.699341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30080.376862, 26656.456390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30455.585602, 26044.519928, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 04:46:15 2012] Writing fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src25.gif
[Mon May 28 04:56:43 2012] Mean detx,y = (4151.03, -265.94) 
[Mon May 28 04:56:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 04:56:49 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 04:56:49 2012] Setting source spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon May 28 04:56:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon May 28 06:02:16 2012] Not generating rmf since there are only 66 counts
[Mon May 28 06:02:16 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:33 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:33 2012] Error reading totcts from fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon May 28 06:03:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:34 2012] Using photon index=1.80, rate=0.00109, arf fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src25.arf
[Mon May 28 06:03:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:34 2012] Updating source flux to 1.1e-14
[Mon May 28 06:05:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting