[Sun May 27 15:59:10 2012] Detection parameters:
  Position = (239.4, 352.7) = 4 23 23.13 -51 25 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.6 +/- 14.7
  Background counts = 29.7
  Rate = 0.002 +/- 0.0003

[Sun May 27 15:59:10 2012] Off-axis axis estimate = 5.81'
[Sun May 27 19:47:09 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Sun May 27 19:47:09 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Sun May 27 19:47:09 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.893
[Sun May 27 19:47:09 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.33"
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src23.ximg exists
[Sun May 27 21:52:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src23.csv
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun May 27 21:52:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src23.csv
[Sun May 27 21:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun May 27 21:52:30 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun May 27 21:53:00 2012] Spatial fit model total counts = 348.196000, observed total counts = 351.000000
[Sun May 27 21:53:00 2012] Offset between fit and detection position for source 21 = 0.109261 pixels
[Sun May 27 21:53:00 2012] 352.153600 total counts/ 276.305000 bgd. counts: snr = 4.563029
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.109261 pixels
  Position = (239.3, 352.6) = 4 23 23.17 -51 25 38.6
  Extent = 5.3 (4.3-6.7)", rotation angle = 0
  Source counts = 75.8 +/- 18.8
  Background counts = 276.3
  Rate = 0.001 +/- 0.0003
[Sun May 27 21:53:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:53:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:53:00 2012] Assessing source extent using major axis lower bound
[Sun May 27 21:53:00 2012] Source does appear to be extended
[Sun May 27 21:53:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 00:47:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 00:47:55 2012] Initial guess for spatial extent in simple fitting = 5.31"
[Mon May 28 00:47:55 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.760
[Mon May 28 00:47:55 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 5.31"
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src23.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src23.csv
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src23.csv
[Mon May 28 02:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon May 28 02:04:00 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon May 28 02:04:21 2012] Spatial fit model total counts = 346.960000, observed total counts = 351.000000
[Mon May 28 02:04:21 2012] Offset between fit and detection position for source 21 = 0.030146 pixels
[Mon May 28 02:04:21 2012] 352.162200 total counts/ 278.367000 bgd. counts: snr = 4.423023
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.030146 pixels
  Position = (239.3, 352.6) = 4 23 23.18 -51 25 38.6
  Extent = 5.2 (4.2-6.7)", rotation angle = 0
  Source counts = 73.8 +/- 18.8
  Background counts = 278.4
  Rate = 0.001 +/- 0.0003
[Mon May 28 02:04:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:21 2012] Assessing source extent using major axis lower bound
[Mon May 28 02:04:21 2012] Source does appear to be extended
[Mon May 28 02:04:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 04:46:14 2012] XMMSAS src. selection expression = ellipse(20770.796600, 30629.041200, 310.915809, 310.915809, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing source region out to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src21_src.reg
[Mon May 28 04:46:14 2012] Extracting stamp from image fullrun_mos2_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (221, 335) - (257, 370)
[Mon May 28 04:46:14 2012] XMMSAS bgd. selection expression = annulus(20770.796600, 30629.041200, 518.193015, 1036.386030, X, Y) && !ellipse(19345.273820, 31082.784200, 436.534413, 436.534413, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src21.gif
[Mon May 28 04:51:34 2012] Mean detx,y = (4460.78, -7781.87) 
[Mon May 28 04:51:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 04:51:40 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 04:51:40 2012] Setting source spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon May 28 04:51:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon May 28 05:50:15 2012] Not generating rmf since there are only 73 counts
[Mon May 28 05:50:15 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:33 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:33 2012] Error reading totcts from fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon May 28 06:03:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:34 2012] Using photon index=1.80, rate=0.00104, arf fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src21.arf
[Mon May 28 06:03:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:34 2012] Updating source flux to 1.8e-14
[Mon May 28 06:05:09 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting