[Sun May 27 15:59:10 2012] Detection parameters:
  Position = (286.8, 236.3) = 4 23 1.12 -51 34 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11180.5 +/- 128.2
  Background counts = 37.9
  Rate = 0.2 +/- 0.002

[Sun May 27 15:59:10 2012] Off-axis axis estimate = 4.59'
[Sun May 27 19:47:09 2012] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Sun May 27 19:47:09 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Sun May 27 19:47:09 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.996
[Sun May 27 19:47:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.72"
[Sun May 27 21:52:29 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 21:52:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 21:52:29 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 21:52:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 21:52:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 21:52:30 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 21:52:30 2012] Fit fullrun_mos2_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 21:53:00 2012] Spatial fit model total counts = 10156.100000, observed total counts = 10163.000000
[Sun May 27 21:53:00 2012] Offset between fit and detection position for source 1 = 0.206821 pixels
[Sun May 27 21:53:00 2012] 10235.950000 total counts/ 2451.600000 bgd. counts: snr = 157.216292
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.206821 pixels
  Position = (286.8, 236.5) = 4 23 1.11 -51 34 4.0
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 7784.4 +/- 101.2
  Background counts = 2451.6
  Rate = 0.1 +/- 0.001
[Sun May 27 21:53:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:53:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:53:00 2012] Assessing source extent using major axis lower bound
[Sun May 27 21:53:00 2012] Source does appear to be extended
[Sun May 27 21:53:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 00:47:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 00:47:55 2012] Initial guess for spatial extent in simple fitting = 5.18"
[Mon May 28 00:47:55 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.786
[Mon May 28 00:47:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.18"
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 02:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 02:04:00 2012] fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 02:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 02:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:21 2012] Spatial fit model total counts = 9028.470000, observed total counts = 10171.000000
[Mon May 28 02:04:21 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 02:04:21 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:21 2012] Assessing source extent using major axis lower bound
[Mon May 28 02:04:21 2012] Source does appear to be extended
[Mon May 28 02:04:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 04:46:14 2012] Counts = 7784.350000, rescaling region sizes by 2.000000
[Mon May 28 04:46:14 2012] XMMSAS src. selection expression = ellipse(24902.074000, 20524.489600, 621.919218, 621.919218, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing source region out to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 04:46:14 2012] Extracting stamp from image fullrun_mos2_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (251, 201) - (323, 272)
[Mon May 28 04:46:14 2012] XMMSAS bgd. selection expression = annulus(24902.074000, 20524.489600, 2073.064060, 4146.128119, X, Y) && !ellipse(27891.060000, 25109.180000, 1188.640034, 1188.640034, 0.000000, X, Y) && !ellipse(26391.879989, 19834.995717, 277.122802, 256.785044, 0.000000, X, Y) && !ellipse(24485.884776, 19224.350200, 386.864011, 386.864011, 0.000000, X, Y) && !ellipse(28991.764404, 25485.729187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.962460, 22561.214400, 363.111359, 363.111359, 0.000000, X, Y) && !ellipse(27144.335600, 17071.240560, 484.769614, 484.769614, 0.000000, X, Y) && !ellipse(28740.919891, 25010.277161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21043.186600, 20864.359600, 296.418409, 296.418409, 0.000000, X, Y) && !ellipse(26774.066223, 18392.000671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30154.798000, 25839.758000, 1295.776037, 1295.776037, 0.000000, X, Y) && !ellipse(29386.519470, 25026.265747, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 04:46:14 2012] Writing fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src1.gif
[Mon May 28 04:46:18 2012] Mean detx,y = (-4283.22, -1265.71) 
[Mon May 28 04:46:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 04:46:37 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 04:46:37 2012] Setting source spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 04:46:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 06:03:33 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:33 2012] Error reading totcts from fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 06:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:33 2012] Using photon index=1.80, rate=0.109, arf fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 06:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:33 2012] Updating source flux to 1.3e-12
[Mon May 28 06:05:09 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Mon May 28 06:06:37 2012] Reading fit data from xmm0651580101/analysis//spectral/fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 06:06:37 2012] Spectral fit parameter nH value = 1.51268e+20
[Mon May 28 06:06:37 2012] Spectral fit parameter PhoIndex value = 1.93069
[Mon May 28 06:06:37 2012] Failed to get F(0.3-8.0) from xmm0651580101/analysis//spectral/fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 06:06:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:06:37 2012] Using Nh = 1.5e+20, photon index=1.93, rate=0.109, arf fullrun_mos2_xmm0651580101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 06:06:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:06:37 2012] Updating source flux to 1.2e-12