[Sun May 27 15:58:38 2012] Detection parameters:
  Position = (183.4, 176.1) = 4 23 49.45 -51 38 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.5 +/- 13.1
  Background counts = 25.4
  Rate = 0.001 +/- 0.0002

[Sun May 27 15:58:38 2012] Off-axis axis estimate = 12.18'
[Sun May 27 17:52:04 2012] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting
[Sun May 27 17:52:04 2012] Initial guess for spatial extent in simple fitting = 12.52"
[Sun May 27 17:52:04 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.920
[Sun May 27 17:52:04 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 12.52"
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src49.ximg exists
[Sun May 27 19:47:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src49.csv
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src49_1.ximg exists
[Sun May 27 19:47:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src49.csv
[Sun May 27 19:47:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sun May 27 19:47:09 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sun May 27 21:52:50 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 10.411992 pixels away
[Sun May 27 21:52:50 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:50 2012] Assessing source extent using major
[Sun May 27 21:52:50 2012] Source does appear to be extended
[Sun May 27 21:52:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:27:30 2012] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting
[Sun May 27 23:27:30 2012] Initial guess for spatial extent in simple fitting = 12.52"
[Sun May 27 23:27:30 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.920
[Sun May 27 23:27:30 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 12.52"
[Mon May 28 00:47:54 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src43.ximg exists
[Mon May 28 00:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src43.csv
[Mon May 28 00:47:54 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon May 28 00:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src43.csv
[Mon May 28 00:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon May 28 00:47:55 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Mon May 28 02:04:15 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 17.200989 pixels away
[Mon May 28 02:04:15 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:15 2012] Assessing source extent using major
[Mon May 28 02:04:15 2012] Source does appear to be extended
[Mon May 28 02:04:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:36:39 2012] XMMSAS src. selection expression = ellipse(15903.462952, 15268.330826, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 03:36:39 2012] Writing source region out to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src58_src.reg
[Mon May 28 03:36:39 2012] Extracting stamp from image fullrun_mos1_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (146, 139) - (221, 214)
[Mon May 28 03:36:39 2012] XMMSAS bgd. selection expression = annulus(15903.462952, 15268.330826, 1087.500000, 2175.000000, X, Y) && !ellipse(13129.822876, 17331.949692, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 03:36:39 2012] Writing fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src58.gif
[Mon May 28 03:45:27 2012] Mean detx,y = (-8492.29, 11385.20) 
[Mon May 28 03:45:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:45:32 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:45:32 2012] Setting source spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon May 28 03:45:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Mon May 28 04:39:00 2012] Not generating rmf since there are only 73 counts
[Mon May 28 04:39:00 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:32 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:32 2012] Error reading totcts from fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon May 28 06:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:33 2012] Using photon index=1.80, rate=0.00103, arf fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src58.arf
[Mon May 28 06:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:33 2012] Updating source flux to 2.1e-14
[Mon May 28 06:03:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting