[Sun May 27 15:58:37 2012] Detection parameters:
  Position = (337.8, 292.9) = 4 22 37.32 -51 29 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.5 +/- 19.0
  Background counts = 62.6
  Rate = 0.002 +/- 0.0003

[Sun May 27 15:58:38 2012] Off-axis axis estimate = 2.88'
[Sun May 27 17:52:04 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Sun May 27 17:52:04 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Sun May 27 17:52:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.563
[Sun May 27 17:52:04 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.87"
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src20.ximg exists
[Sun May 27 19:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src20.csv
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun May 27 19:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src20.csv
[Sun May 27 19:47:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun May 27 19:47:09 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun May 27 21:52:50 2012] Spatial fit model total counts = 1859.600000, observed total counts = 1852.000000
[Sun May 27 21:52:50 2012] Offset between fit and detection position for source 36 = 6.475236 pixels
[Sun May 27 21:52:50 2012] Warning, changing simple spatial fit ID from 20 to 19
[Sun May 27 21:52:50 2012] 1827.705700 total counts/ 1757.870000 bgd. counts: snr = 1.665651
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 6.475236 pixels
  Position = (333.8, 298.0) = 4 22 39.23 -51 29 36.5
  Extent = 13.1 (9.0-15.1)", rotation angle = 0
  Source counts = 69.8 +/- 42.8
  Background counts = 1757.9
  Rate = 0.001 +/- 0.0006
  Deleting source due to low Poisson probability