[Sun May 27 15:58:37 2012] Detection parameters:
  Position = (342.1, 302.7) = 4 22 35.36 -51 29 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.6 +/- 18.7
  Background counts = 66.4
  Rate = 0.002 +/- 0.0003

[Sun May 27 15:58:38 2012] Off-axis axis estimate = 3.18'
[Sun May 27 17:52:04 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Sun May 27 17:52:04 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Sun May 27 17:52:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Sun May 27 17:52:04 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.02"
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src23.ximg exists
[Sun May 27 19:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src23.csv
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun May 27 19:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src23.csv
[Sun May 27 19:47:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun May 27 19:47:09 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun May 27 21:52:50 2012] Warning, spatial fit 23 centroid is now closest to src. 33
[Sun May 27 21:52:50 2012] Source 34 is offset by -1.171613 and -0.808344 pixels which is larger than
2 X fitted extent = 0.953894 x 0.953894, not incorporating fit results
[Sun May 27 21:52:50 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:50 2012] Assessing source extent using major
[Sun May 27 21:52:50 2012] Source does appear to be extended
[Sun May 27 21:52:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:52:50 2012] Source is confused with source 33
[Sun May 27 23:27:30 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Sun May 27 23:27:30 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Sun May 27 23:27:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Sun May 27 23:27:30 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.02"
[Mon May 28 00:47:54 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src21.ximg exists
[Mon May 28 00:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src21.csv
[Mon May 28 00:47:54 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon May 28 00:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src21.csv
[Mon May 28 00:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon May 28 00:47:55 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon May 28 02:04:15 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 20.848292 pixels away
[Mon May 28 02:04:15 2012] Warning, spatial fit 21 centroid is now closest to src. 33
[Mon May 28 02:04:15 2012] Source 34 is offset by -1.156578 and -0.790827 pixels which is larger than
2 X fitted extent = 0.953894 x 0.953894, not incorporating fit results
[Mon May 28 02:04:15 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:15 2012] Assessing source extent using major
[Mon May 28 02:04:15 2012] Source does appear to be extended
[Mon May 28 02:04:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:36:39 2012] XMMSAS src. selection expression = ellipse(29710.435699, 26289.664093, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 03:36:39 2012] Writing source region out to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src34_src.reg
[Mon May 28 03:36:39 2012] Extracting stamp from image fullrun_mos1_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (305, 265) - (380, 340)
[Mon May 28 03:36:39 2012] XMMSAS bgd. selection expression = annulus(29710.435699, 26289.664093, 1087.500000, 2175.000000, X, Y) && !ellipse(28445.492000, 26430.154000, 786.599223, 786.599223, 0.000000, X, Y) && !ellipse(31338.678200, 27251.292540, 466.382413, 466.382413, 0.000000, X, Y) && !ellipse(28577.877800, 25129.376000, 726.487221, 726.487221, 0.000000, X, Y) && !ellipse(29086.156000, 26791.326000, 691.917620, 691.917620, 0.000000, X, Y) && !ellipse(27392.238000, 26661.898000, 1132.256033, 1132.256033, 0.000000, X, Y) && !ellipse(29106.121826, 24663.928589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.288200, 28633.264800, 592.264817, 592.264817, 0.000000, X, Y) && !ellipse(28778.154022, 27942.568512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30099.758575, 25180.623840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29642.952820, 25019.792786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.258789, 24599.817596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26920.509674, 25355.582306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28395.936005, 24489.883453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30402.429260, 25787.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27329.907227, 25270.188599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29237.757400, 23852.814000, 1277.224037, 1277.224037, 0.000000, X, Y)
[Mon May 28 03:36:39 2012] Writing fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src34.gif
[Mon May 28 03:41:28 2012] Mean detx,y = (2109.37, -2604.08) 
[Mon May 28 03:41:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:41:34 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:41:34 2012] Setting source spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon May 28 03:41:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon May 28 04:27:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 04:27:27 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:32 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:32 2012] Error reading totcts from fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon May 28 06:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:33 2012] Using photon index=1.80, rate=0.0022, arf fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src34.arf
[Mon May 28 06:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:33 2012] Updating source flux to 2.4e-14
[Mon May 28 06:03:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting