[Sun May 27 15:58:37 2012] Detection parameters:
  Position = (310.1, 312.0) = 4 22 50.25 -51 28 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.9 +/- 18.9
  Background counts = 62.2
  Rate = 0.002 +/- 0.0003

[Sun May 27 15:58:38 2012] Off-axis axis estimate = 1.30'
[Sun May 27 17:52:04 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Sun May 27 17:52:04 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Sun May 27 17:52:04 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.884
[Sun May 27 17:52:04 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.08"
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src26.ximg exists
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun May 27 19:47:08 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src26 appears to have run properly
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun May 27 19:47:09 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun May 27 21:52:50 2012] Spatial fit model total counts = 1530.180000, observed total counts = 1532.000000
[Sun May 27 21:52:50 2012] Offset between fit and detection position for source 32 = 7.268380 pixels
[Sun May 27 21:52:50 2012] 1553.375000 total counts/ 1395.490000 bgd. counts: snr = 4.226467
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 7.268380 pixels
  Position = (315.4, 307.0) = 4 22 47.78 -51 28 57.2
  Extent = 14.2 (14.1-28.3)", rotation angle = 0
  Source counts = 157.9 +/- 39.4
  Background counts = 1395.5
  Rate = 0.002 +/- 0.0006
[Sun May 27 21:52:50 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:50 2012] Assessing source extent using major axis lower bound
[Sun May 27 21:52:50 2012] Source does appear to be extended
[Sun May 27 21:52:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:27:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 23:27:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 23:27:30 2012] Initial guess for spatial extent in simple fitting = 14.15"
[Sun May 27 23:27:30 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.994
[Sun May 27 23:27:30 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 14.15"
[Mon May 28 00:47:54 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src24.ximg exists
[Mon May 28 00:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src24.csv
[Mon May 28 00:47:54 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon May 28 00:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src24.csv
[Mon May 28 00:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon May 28 00:47:55 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Mon May 28 02:04:15 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 10.086472 pixels away
[Mon May 28 02:04:15 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:15 2012] Assessing source extent using major axis lower bound
[Mon May 28 02:04:15 2012] Source does appear to be extended
[Mon May 28 02:04:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:36:39 2012] XMMSAS src. selection expression = ellipse(27392.238000, 26661.898000, 849.192024, 849.192024, 0.000000, X, Y)
[Mon May 28 03:36:39 2012] Writing source region out to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src32_src.reg
[Mon May 28 03:36:39 2012] Extracting stamp from image fullrun_mos1_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (267, 258) - (364, 356)
[Mon May 28 03:36:39 2012] XMMSAS bgd. selection expression = annulus(27392.238000, 26661.898000, 1415.320041, 2830.640081, X, Y) && !ellipse(28445.492000, 26430.154000, 786.599223, 786.599223, 0.000000, X, Y) && !ellipse(26522.743600, 27790.570600, 350.513610, 350.513610, 0.000000, X, Y) && !ellipse(25014.990700, 28925.742400, 343.927210, 343.927210, 0.000000, X, Y) && !ellipse(28577.877800, 25129.376000, 726.487221, 726.487221, 0.000000, X, Y) && !ellipse(29710.435699, 26289.664093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29086.156000, 26791.326000, 691.917620, 691.917620, 0.000000, X, Y) && !ellipse(29106.121826, 24663.928589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.288200, 28633.264800, 592.264817, 592.264817, 0.000000, X, Y) && !ellipse(28778.154022, 27942.568512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30099.758575, 25180.623840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29642.952820, 25019.792786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.258789, 24599.817596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26920.509674, 25355.582306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28395.936005, 24489.883453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30402.429260, 25787.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27329.907227, 25270.188599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29237.757400, 23852.814000, 1277.224037, 1277.224037, 0.000000, X, Y)
[Mon May 28 03:36:39 2012] Writing fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src32.gif
[Mon May 28 03:42:02 2012] Mean detx,y = (61.45, -2486.58) 
[Mon May 28 03:42:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:42:08 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:42:08 2012] Setting source spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon May 28 03:42:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon May 28 06:03:32 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:32 2012] Error reading totcts from fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon May 28 06:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:33 2012] Using photon index=1.80, rate=0.00222, arf fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src32.arf
[Mon May 28 06:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:33 2012] Updating source flux to 2.2e-14