[Sun May 27 15:58:37 2012] Detection parameters:
  Position = (454.0, 172.1) = 4 21 42.97 -51 38 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.3 +/- 11.2
  Background counts = 28.3
  Rate = 0.0008 +/- 0.0002

[Sun May 27 15:58:38 2012] Off-axis axis estimate = 14.53'
[Sun May 27 17:52:04 2012] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Sun May 27 17:52:04 2012] Initial guess for spatial extent in simple fitting = 13.69"
[Sun May 27 17:52:04 2012] source mask rpix=3.1, npix_max = 53, mask sum = 50, frac = 0.939
[Sun May 27 17:52:04 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 13.69"
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src58.ximg exists
[Sun May 27 19:47:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src58.csv
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src58_1.ximg exists
[Sun May 27 19:47:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src58.csv
[Sun May 27 19:47:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sun May 27 19:47:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sun May 27 19:47:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun May 27 19:47:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:52:50 2012] Spatial fit model total counts = 366.660000, observed total counts = 264.000000
[Sun May 27 21:52:50 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 21:52:50 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:50 2012] Assessing source extent using major
[Sun May 27 21:52:50 2012] Source does appear to be extended
[Sun May 27 21:52:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:27:30 2012] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Sun May 27 23:27:30 2012] Initial guess for spatial extent in simple fitting = 13.69"
[Sun May 27 23:27:30 2012] source mask rpix=3.1, npix_max = 53, mask sum = 50, frac = 0.939
[Sun May 27 23:27:30 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 13.69"
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src49.ximg exists
[Mon May 28 00:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src49.csv
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon May 28 00:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src49.csv
[Mon May 28 00:47:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon May 28 00:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon May 28 00:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon May 28 00:47:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 02:04:15 2012] Warning, spatial fit 22 centroid is now closest to src. 4
[Mon May 28 02:04:15 2012] Spatial fit model total counts = 363.567000, observed total counts = 264.000000
[Mon May 28 02:04:15 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 02:04:15 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:15 2012] Assessing source extent using major
[Mon May 28 02:04:15 2012] Source does appear to be extended
[Mon May 28 02:04:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:36:39 2012] XMMSAS src. selection expression = ellipse(39451.151428, 14920.514023, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 03:36:39 2012] Writing source region out to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src22_src.reg
[Mon May 28 03:36:39 2012] Extracting stamp from image fullrun_mos1_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (417, 135) - (492, 210)
[Mon May 28 03:36:39 2012] XMMSAS bgd. selection expression = annulus(39451.151428, 14920.514023, 1087.500000, 2175.000000, X, Y) && !ellipse(37305.131073, 13505.327652, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 03:36:39 2012] Writing fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src22.gif
[Mon May 28 03:46:35 2012] Mean detx,y = (14409.33, 5862.27) 
[Mon May 28 03:46:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:46:45 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:46:45 2012] Setting source spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon May 28 03:46:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon May 28 04:46:10 2012] Not generating rmf since there are only 54 counts
[Mon May 28 04:46:10 2012] rmf not generated due to insufficient counts
[Mon May 28 06:03:32 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:32 2012] Error reading totcts from fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon May 28 06:03:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:33 2012] Using photon index=1.80, rate=0.000761, arf fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src22.arf
[Mon May 28 06:03:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:33 2012] Updating source flux to 2e-14
[Mon May 28 06:03:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting