[Sun May 27 15:58:37 2012] Detection parameters:
  Position = (286.7, 236.2) = 4 23 1.17 -51 34 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10906.7 +/- 124.3
  Background counts = 38.9
  Rate = 0.2 +/- 0.002

[Sun May 27 15:58:38 2012] Off-axis axis estimate = 4.59'
[Sun May 27 17:52:04 2012] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Sun May 27 17:52:04 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Sun May 27 17:52:04 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.797
[Sun May 27 17:52:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.72"
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 19:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 19:47:08 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 19:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 19:47:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 19:47:09 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 19:47:09 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 21:52:50 2012] Spatial fit model total counts = 9875.190000, observed total counts = 9934.000000
[Sun May 27 21:52:50 2012] Offset between fit and detection position for source 1 = 0.263764 pixels
[Sun May 27 21:52:50 2012] 9965.190000 total counts/ 2425.130000 bgd. counts: snr = 153.111316
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.263764 pixels
  Position = (286.7, 236.5) = 4 23 1.13 -51 34 4.0
  Extent = 5.0 (4.9-5.1)", rotation angle = 0
  Source counts = 7540.1 +/- 99.8
  Background counts = 2425.1
  Rate = 0.1 +/- 0.001
[Sun May 27 21:52:50 2012] Vigneting correction estimate = 1.000000
[Sun May 27 21:52:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 21:52:50 2012] Assessing source extent using major axis lower bound
[Sun May 27 21:52:50 2012] Source does appear to be extended
[Sun May 27 21:52:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:27:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 23:27:30 2012] Initial guess for spatial extent in simple fitting = 5.03"
[Sun May 27 23:27:30 2012] source mask rpix=1.2, npix_max = 10, mask sum = 9, frac = 0.820
[Sun May 27 23:27:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.03"
[Mon May 28 00:47:54 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 00:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 00:47:54 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 00:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 00:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 00:47:55 2012] fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 00:47:55 2012] Fit fullrun_mos1_xmm0651580101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 02:04:15 2012] Spatial fit model total counts = 9907.020000, observed total counts = 9957.000000
[Mon May 28 02:04:15 2012] Offset between fit and detection position for source 1 = 0.005446 pixels
[Mon May 28 02:04:15 2012] 9970.100000 total counts/ 2370.130000 bgd. counts: snr = 156.108228
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005446 pixels
  Position = (286.8, 236.5) = 4 23 1.13 -51 34 4.0
  Extent = 5.1 (5.0-5.2)", rotation angle = 0
  Source counts = 7600.0 +/- 99.9
  Background counts = 2370.1
  Rate = 0.1 +/- 0.001
[Mon May 28 02:04:15 2012] Vigneting correction estimate = 1.000000
[Mon May 28 02:04:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 02:04:15 2012] Assessing source extent using major axis lower bound
[Mon May 28 02:04:15 2012] Source does appear to be extended
[Mon May 28 02:04:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:36:38 2012] Counts = 7599.970000, rescaling region sizes by 2.000000
[Mon May 28 03:36:38 2012] XMMSAS src. selection expression = ellipse(24898.948800, 20524.790600, 610.807218, 610.807218, 0.000000, X, Y)
[Mon May 28 03:36:38 2012] Writing source region out to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 03:36:38 2012] Extracting stamp from image fullrun_mos1_xmm0651580101_pi300-10000_cl_sm2.00.img.gz, (252, 201) - (322, 272)
[Mon May 28 03:36:38 2012] XMMSAS bgd. selection expression = annulus(24898.948800, 20524.790600, 2036.024059, 4072.048117, X, Y) && !ellipse(24477.619732, 19219.825366, 326.824211, 258.114030, 64.805054, X, Y) && !ellipse(26376.880400, 19821.887600, 318.890409, 318.890409, 0.000000, X, Y) && !ellipse(27135.890961, 17068.525650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28577.877800, 25129.376000, 726.487221, 726.487221, 0.000000, X, Y) && !ellipse(21036.659424, 20843.458252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26695.186600, 22564.778600, 309.477609, 309.477609, 0.000000, X, Y) && !ellipse(27112.074350, 19197.523708, 347.559223, 272.852389, 24.448273, X, Y) && !ellipse(29106.121826, 24663.928589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25868.292358, 17546.306137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29642.952820, 25019.792786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.258789, 24599.817596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26920.509674, 25355.582306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28395.936005, 24489.883453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27329.907227, 25270.188599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29237.757400, 23852.814000, 1277.224037, 1277.224037, 0.000000, X, Y)
[Mon May 28 03:36:38 2012] Writing fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src1.gif
[Mon May 28 03:36:43 2012] Mean detx,y = (-1070.71, 4111.79) 
[Mon May 28 03:36:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:37:01 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:37:01 2012] Setting source spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 03:37:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 06:03:32 2012] Updating aperture counts using extracted products
[Mon May 28 06:03:32 2012] Error reading totcts from fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 06:03:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:03:32 2012] Using photon index=1.80, rate=0.107, arf fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 06:03:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:03:32 2012] Updating source flux to 1.1e-12
[Mon May 28 06:05:09 2012] Reading fit data from xmm0651580101/analysis//spectral/fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 06:05:09 2012] Spectral fit parameter nH value = 1.72044e+13
[Mon May 28 06:05:09 2012] Spectral fit parameter PhoIndex value = 1.89645
[Mon May 28 06:05:09 2012] Failed to get F(0.3-8.0) from xmm0651580101/analysis//spectral/fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 06:05:09 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 06:05:09 2012] Using Nh = 1.7e+13, photon index=1.90, rate=0.107, arf fullrun_mos1_xmm0651580101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 06:05:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 06:05:09 2012] Updating source flux to 1.1e-12