[Sat Sep  1 10:43:17 2012] Detection parameters:
  Position = (306.0, 275.9) = 8 38 49.25 -48 31 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28360.9 +/- 201.1
  Background counts = 106.7
  Rate = 0.9 +/- 0.007

[Sat Sep  1 10:43:17 2012] Off-axis axis estimate = 1.72'
[Sat Sep  1 10:46:14 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 10:46:14 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Sep  1 10:46:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Sep  1 10:46:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Sep  1 11:32:43 2012] fullrun_pn_xmm0651540101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Sep  1 11:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651540101_pi300-10000_cl_pass0_src1.csv
[Sat Sep  1 11:32:43 2012] fullrun_pn_xmm0651540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Sep  1 11:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651540101_pi300-10000_cl_pass0_src1.csv
[Sat Sep  1 11:32:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651540101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651540101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 11:32:44 2012] fullrun_pn_xmm0651540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep  1 11:32:44 2012] fullrun_pn_xmm0651540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep  1 11:32:44 2012] Fit fullrun_pn_xmm0651540101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep  1 12:25:34 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.183286 pixels away
[Sat Sep  1 12:25:34 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 12:25:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 12:25:34 2012] Assessing source extent using major
[Sat Sep  1 12:25:34 2012] Source does appear to be extended
[Sat Sep  1 12:25:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 12:25:49 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 12:25:49 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Sep  1 12:25:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Sep  1 12:25:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Sat Sep  1 13:06:42 2012] fullrun_pn_xmm0651540101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Sep  1 13:06:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651540101_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 13:06:42 2012] fullrun_pn_xmm0651540101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Sep  1 13:06:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651540101_pi300-10000_cl_pass1_src1.csv
[Sat Sep  1 13:06:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651540101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651540101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 13:06:43 2012] fullrun_pn_xmm0651540101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep  1 13:06:43 2012] fullrun_pn_xmm0651540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep  1 13:06:43 2012] Fit fullrun_pn_xmm0651540101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep  1 13:44:34 2012] Spatial fit model total counts = 25142.800000, observed total counts = 24980.000000
[Sat Sep  1 13:44:34 2012] Offset between fit and detection position for source 1 = 0.121598 pixels
[Sat Sep  1 13:44:34 2012] 25094.040000 total counts/ 5542.740000 bgd. counts: snr = 262.611286
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.121598 pixels
  Position = (305.9, 275.8) = 8 38 49.29 -48 31 25.1
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 19551.3 +/- 158.4
  Background counts = 5542.7
  Rate = 0.6 +/- 0.005
[Sat Sep  1 13:44:34 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 13:44:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 13:44:34 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 13:44:34 2012] Source does appear to be extended
[Sat Sep  1 13:44:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 13:44:49 2012] Counts = 19551.300000, rescaling region sizes by 3.000000
[Sat Sep  1 13:44:49 2012] XMMSAS src. selection expression = ellipse(26567.000780, 23949.260600, 1047.429030, 1047.429030, 0.000000, X, Y)
[Sat Sep  1 13:44:49 2012] Writing source region out to fullrun_pn_xmm0651540101_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep  1 13:44:49 2012] Extracting stamp from image fullrun_pn_xmm0651540101_pi300-10000_cl_sm2.00.img.gz, (246, 216) - (366, 336)
[Sat Sep  1 13:44:49 2012] XMMSAS bgd. selection expression = annulus(26567.000780, 23949.260600, 5237.145151, 10474.290301, X, Y) && !ellipse(35907.130707, 30128.576263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25142.638336, 29533.547028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.173859, 28167.189301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19689.120280, 27886.023000, 394.516011, 394.516011, 0.000000, X, Y) && !ellipse(36554.782623, 27027.589661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22081.971800, 25872.501600, 421.172012, 421.172012, 0.000000, X, Y) && !ellipse(27460.372711, 21502.278549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36920.305817, 34820.161713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23067.318756, 33898.911682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.019196, 15738.593597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20420.851200, 28776.070600, 736.490421, 736.490421, 0.000000, X, Y) && !ellipse(19211.718399, 28402.143463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18561.750000, 28680.381000, 1505.248043, 1505.248043, 0.000000, X, Y) && !ellipse(30446.747009, 16126.014145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27167.499084, 26792.003601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20847.265564, 21909.682175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28795.786400, 19866.340800, 376.620811, 376.620811, 0.000000, X, Y) && !ellipse(34909.678680, 18606.134094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17920.981216, 17863.969772, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep  1 13:44:49 2012] Writing fullrun_pn_xmm0651540101_pi300-10000_pass1_cl_src1.gif
[Sat Sep  1 13:45:21 2012] Mean detx,y = (103.01, -229.97) 
[Sat Sep  1 13:45:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 13:49:20 2012] grppha failed
[Sat Sep  1 13:49:21 2012] Setting source spectrum file to fullrun_pn_xmm0651540101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 13:49:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651540101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep  1 14:15:03 2012] Updating aperture counts using extracted products
[Sat Sep  1 14:15:03 2012] Error reading totcts from fullrun_pn_xmm0651540101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 14:15:03 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 14:15:07 2012] Source 1 has no response, skipping
[Sat Sep  1 14:15:08 2012] xmm0651540101/analysis//spectral/fullrun_pn_xmm0651540101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete