[Sat May 26 06:01:16 2012] Detection parameters:
  Position = (295.3, 321.9) = 4 20 2.11 -50 22 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.6 +/- 9.7
  Background counts = 2.3
  Rate = 0.01 +/- 0.002

[Sat May 26 06:01:16 2012] Off-axis axis estimate = 1.72'
[Sat May 26 06:05:26 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat May 26 06:05:26 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat May 26 06:05:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat May 26 06:05:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat May 26 06:09:41 2012] fullrun_mos2_xmm0651471501_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 26 06:09:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651471501_pi300-10000_cl_pass0_src1.csv
[Sat May 26 06:09:41 2012] fullrun_mos2_xmm0651471501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 26 06:09:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651471501_pi300-10000_cl_pass0_src1.csv
[Sat May 26 06:09:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651471501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651471501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 06:09:41 2012] fullrun_mos2_xmm0651471501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 26 06:09:41 2012] fullrun_mos2_xmm0651471501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 26 06:09:41 2012] Fit fullrun_mos2_xmm0651471501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 26 06:09:44 2012] Spatial fit model total counts = 68.639800, observed total counts = 66.000000
[Sat May 26 06:09:44 2012] Offset between fit and detection position for source 1 = 0.114966 pixels
[Sat May 26 06:09:44 2012] 69.040300 total counts/ 20.623500 bgd. counts: snr = 10.661416
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.114966 pixels
  Position = (295.2, 321.8) = 4 20 2.13 -50 22 50.0
  Extent = 6.6 (4.6-8.3)", rotation angle = 0
  Source counts = 48.4 +/- 8.3
  Background counts = 20.6
  Rate = 0.009 +/- 0.001
[Sat May 26 06:09:44 2012] Vigneting correction estimate = 1.000000
[Sat May 26 06:09:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 06:09:44 2012] Assessing source extent using major axis lower bound
[Sat May 26 06:09:44 2012] Source does appear to be extended
[Sat May 26 06:09:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 06:13:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 06:13:34 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Sat May 26 06:13:34 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.993
[Sat May 26 06:13:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.56"
[Sat May 26 06:16:12 2012] fullrun_mos2_xmm0651471501_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 26 06:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651471501_pi300-10000_cl_pass1_src1.csv
[Sat May 26 06:16:12 2012] fullrun_mos2_xmm0651471501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 26 06:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651471501_pi300-10000_cl_pass1_src1.csv
[Sat May 26 06:16:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651471501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651471501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 06:16:12 2012] fullrun_mos2_xmm0651471501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 26 06:16:12 2012] fullrun_mos2_xmm0651471501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 26 06:16:12 2012] Fit fullrun_mos2_xmm0651471501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 26 06:16:14 2012] Spatial fit model total counts = 69.318400, observed total counts = 67.000000
[Sat May 26 06:16:14 2012] Offset between fit and detection position for source 1 = 0.024535 pixels
[Sat May 26 06:16:14 2012] 69.791300 total counts/ 21.416000 bgd. counts: snr = 10.453326
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024535 pixels
  Position = (295.2, 321.8) = 4 20 2.12 -50 22 50.1
  Extent = 6.6 (4.7-8.3)", rotation angle = 0
  Source counts = 48.4 +/- 8.4
  Background counts = 21.4
  Rate = 0.009 +/- 0.001
[Sat May 26 06:16:14 2012] Vigneting correction estimate = 1.000000
[Sat May 26 06:16:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 06:16:14 2012] Assessing source extent using major axis lower bound
[Sat May 26 06:16:14 2012] Source does appear to be extended
[Sat May 26 06:16:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 06:20:16 2012] XMMSAS src. selection expression = ellipse(25637.287400, 27945.348000, 393.022121, 393.022121, 0.000000, X, Y)
[Sat May 26 06:20:16 2012] Writing source region out to fullrun_mos2_xmm0651471501_pi300-10000_pass1_cl_src1_src.reg
[Sat May 26 06:20:16 2012] Extracting stamp from image fullrun_mos2_xmm0651471501_pi300-10000_cl_sm2.00.img.gz, (273, 299) - (318, 344)
[Sat May 26 06:20:16 2012] XMMSAS bgd. selection expression = annulus(25637.287400, 27945.348000, 655.036868, 1310.073735, X, Y)
[Sat May 26 06:20:16 2012] Writing fullrun_mos2_xmm0651471501_pi300-10000_pass1_cl_src1.gif
[Sat May 26 06:20:17 2012] Mean detx,y = (67.93, 76.95) 
[Sat May 26 06:20:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 06:20:28 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 06:20:28 2012] Setting source spectrum file to fullrun_mos2_xmm0651471501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 06:20:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651471501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 26 06:20:55 2012] Not generating rmf since there are only 48 counts
[Sat May 26 06:20:55 2012] rmf not generated due to insufficient counts
[Sat May 26 06:21:09 2012] Updating aperture counts using extracted products
[Sat May 26 06:21:09 2012] Error reading totcts from fullrun_mos2_xmm0651471501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 06:21:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 06:21:09 2012] Using photon index=1.80, rate=0.00861, arf fullrun_mos2_xmm0651471501_pi300-10000_pass1_cl_src1.arf
[Sat May 26 06:21:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 06:21:09 2012] Updating source flux to 1e-13
[Sat May 26 06:21:11 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 26 06:21:12 2012] xmm0651471501/analysis//spectral/fullrun_mos2_xmm0651471501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete