[Thu Jun 21 07:17:09 2012] Detection parameters:
  Position = (351.5, 463.9) = 17 53 52.84 -27 41 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.8 +/- 13.7
  Background counts = 18.5
  Rate = 0.002 +/- 0.0003

[Thu Jun 21 07:17:09 2012] Off-axis axis estimate = 12.60'
[Thu Jun 21 07:47:51 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 07:47:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 07:47:51 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Thu Jun 21 07:47:51 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.044
[Thu Jun 21 07:47:51 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.73"
[Thu Jun 21 08:31:20 2012] fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_src14.ximg exists
[Thu Jun 21 08:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_src14.csv
[Thu Jun 21 08:31:20 2012] fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Jun 21 08:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_src14.csv
[Thu Jun 21 08:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:31:20 2012] fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Jun 21 08:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu Jun 21 08:31:20 2012] fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Jun 21 08:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu Jun 21 08:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651450101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 08:31:30 2012] Spatial fit model total counts = 305.688000, observed total counts = 259.000000
[Thu Jun 21 08:31:30 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 08:31:31 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 08:31:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 08:31:31 2012] Assessing source extent using major
[Thu Jun 21 08:31:31 2012] Source does appear to be extended
[Thu Jun 21 08:31:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 09:32:38 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 09:32:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 09:32:38 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Thu Jun 21 09:32:38 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.044
[Thu Jun 21 09:32:38 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.73"
[Thu Jun 21 10:09:26 2012] fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 21 10:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 10:09:26 2012] fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 21 10:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 21 10:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 10:09:26 2012] fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 21 10:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 10:09:26 2012] fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 21 10:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu Jun 21 10:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651450101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 10:09:39 2012] Spatial fit model total counts = 318.529000, observed total counts = 259.000000
[Thu Jun 21 10:09:39 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 10:09:39 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 10:09:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 10:09:39 2012] Assessing source extent using major
[Thu Jun 21 10:09:39 2012] Source does appear to be extended
[Thu Jun 21 10:09:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 10:50:38 2012] XMMSAS src. selection expression = ellipse(30532.937225, 40308.935638, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 21 10:50:38 2012] Writing source region out to fullrun_mos2_xmm0651450101_pi300-10000_pass1_cl_src10_src.reg
[Thu Jun 21 10:50:38 2012] Extracting stamp from image fullrun_mos2_xmm0651450101_pi300-10000_cl_sm2.00.img.gz, (314, 426) - (389, 501)
[Thu Jun 21 10:50:38 2012] XMMSAS bgd. selection expression = annulus(30532.937225, 40308.935638, 1087.500000, 2175.000000, X, Y)
[Thu Jun 21 10:50:38 2012] Writing fullrun_mos2_xmm0651450101_pi300-10000_pass1_cl_src10.gif
[Thu Jun 21 10:59:49 2012] Mean detx,y = (5805.17, -15925.35) 
[Thu Jun 21 10:59:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 21 11:00:14 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 21 11:00:15 2012] Setting source spectrum file to fullrun_mos2_xmm0651450101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 21 11:00:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651450101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jun 21 11:16:09 2012] Not generating rmf since there are only 99 counts
[Thu Jun 21 11:16:09 2012] rmf not generated due to insufficient counts
[Thu Jun 21 11:18:14 2012] Updating aperture counts using extracted products
[Thu Jun 21 11:18:14 2012] Error reading totcts from fullrun_mos2_xmm0651450101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Jun 21 11:18:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 21 11:18:15 2012] Using photon index=1.80, rate=0.00231, arf fullrun_mos2_xmm0651450101_pi300-10000_pass1_cl_src10.arf
[Thu Jun 21 11:18:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 21 11:18:15 2012] Updating source flux to 8.5e-14
[Thu Jun 21 11:20:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting