[Wed May 22 00:39:33 2013] Detection parameters:
  Position = (301.1, 299.9) = 17 13 38.08 58 48 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.5 +/- 13.2
  Background counts = 20.9
  Rate = 0.01 +/- 0.002

[Wed May 22 00:39:34 2013] Off-axis axis estimate = 0.22'
[Wed May 22 00:39:58 2013] Using EEF radius (= 6.54 ")to estimate initial spatial extent for simple fitting
[Wed May 22 00:39:58 2013] Initial guess for spatial extent in simple fitting = 6.54"
[Wed May 22 00:39:58 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Wed May 22 00:39:58 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 6.54"
[Wed May 22 00:39:59 2013] fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_src11.ximg exists
[Wed May 22 00:39:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_src11.csv
[Wed May 22 00:39:59 2013] fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May 22 00:39:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_src11.csv
[Wed May 22 00:39:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 00:39:59 2013] fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May 22 00:39:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 22 00:39:59 2013] fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 22 00:39:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 22 00:39:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 00:40:09 2013] Source 11 is offset by -4.565139 and 4.892332 pixels which is larger than
2 X fitted extent = 2.071251 x 2.071251, not incorporating fit results
[Wed May 22 00:40:09 2013] Vigneting correction estimate = 1.000000
[Wed May 22 00:40:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 00:40:09 2013] Assessing source extent using major
[Wed May 22 00:40:09 2013] Source does appear to be extended
[Wed May 22 00:40:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 00:40:26 2013] Using EEF radius (= 6.54 ")to estimate initial spatial extent for simple fitting
[Wed May 22 00:40:26 2013] Initial guess for spatial extent in simple fitting = 6.54"
[Wed May 22 00:40:26 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Wed May 22 00:40:26 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 6.54"
[Wed May 22 00:40:27 2013] fullrun_pn_xmm0651372901_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 22 00:40:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651372901_pi300-10000_cl_pass1_src9.csv
[Wed May 22 00:40:27 2013] fullrun_pn_xmm0651372901_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 22 00:40:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651372901_pi300-10000_cl_pass1_src9.csv
[Wed May 22 00:40:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651372901_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651372901_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 00:40:28 2013] fullrun_pn_xmm0651372901_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 22 00:40:28 2013] fullrun_pn_xmm0651372901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 22 00:40:28 2013] Fit fullrun_pn_xmm0651372901_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed May 22 00:40:37 2013] Source 11 is offset by -4.593898 and 4.892332 pixels which is larger than
2 X fitted extent = 2.493030 x 2.493030, not incorporating fit results
[Wed May 22 00:40:37 2013] Vigneting correction estimate = 1.000000
[Wed May 22 00:40:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 00:40:37 2013] Assessing source extent using major
[Wed May 22 00:40:37 2013] Source does appear to be extended
[Wed May 22 00:40:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 00:40:55 2013] XMMSAS src. selection expression = ellipse(26150.614899, 26040.964844, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 00:40:55 2013] Not overwriting source region fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_src.reg
[Wed May 22 00:40:55 2013] Extracting stamp from image fullrun_pn_xmm0651372901_pi300-10000_cl_sm2.00.img.gz, (264, 262) - (339, 337)
[Wed May 22 00:40:55 2013] XMMSAS bgd. selection expression = annulus(26150.614899, 26040.964844, 1087.500000, 2175.000000, X, Y)
[Wed May 22 00:40:55 2013] Writing fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11.gif
[Wed May 22 00:40:56 2013] ../../xmm0651372901/products/events/fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0651372901/products/events/fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Wed May 22 00:40:56 2013] Mean detx,y = (-1272.03, 1197.75) 
[Wed May 22 00:40:56 2013] ../../xmm0651372901/products/images/fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_src.img and ../../xmm0651372901/products/images/fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Wed May 22 00:40:56 2013] ../../xmm0651372901/products/spectra/fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0651372901/products/spectra/fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Wed May 22 00:40:56 2013] Setting source spectrum file to fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May 22 00:40:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed May 22 00:40:56 2013] ../../xmm0651372901/products/lightcurves/fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0651372901/products/lightcurves/fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Wed May 22 00:41:02 2013] Not generating rmf since there are only 78 counts
[Wed May 22 00:41:02 2013] rmf not generated due to insufficient counts
[Wed May 22 00:41:02 2013] fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Wed May 22 01:05:32 2013] Updating aperture counts using extracted products
[Wed May 22 01:05:32 2013] Total counts from fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 227.00
[Wed May 22 01:05:33 2013] Total counts from fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_bgd.pi.gz = 490.00
[Wed May 22 01:05:33 2013] Got source and background scale factors 1344000.000000, 10383929.000000
[Wed May 22 01:05:33 2013] User source parameters:
  Position = (301.1, 299.9) = 17 13 38.08 58 48 24.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 163.6 +/- 16.1
  Background aperture counts = 63.4
  Rate = 0.02 +/- 0.002

[Wed May 22 01:05:33 2013] Updating counts from extracted products
[Wed May 22 01:05:33 2013] Set source signif. to 163.58/7.96 = 20.54
[Wed May 22 01:05:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 01:05:38 2013] Using photon index=1.80, rate=0.024, arf fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11.arf
[Wed May 22 01:05:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 01:05:38 2013] Updating source flux to 7.2e-14
[Wed May 22 01:05:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 01:05:55 2013] xmm0651372901/analysis//spectral/fullrun_pn_xmm0651372901_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete