[Wed May 22 00:39:35 2013] Detection parameters:
  Position = (178.2, 146.8) = 17 14 46.54 58 37 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.2 +/- 7.4
  Background counts = 5.0
  Rate = 0.003 +/- 0.0008

[Wed May 22 00:39:35 2013] Off-axis axis estimate = 14.03'
[Wed May 22 00:39:59 2013] Using EEF radius (= 13.44 ")to estimate initial spatial extent for simple fitting
[Wed May 22 00:39:59 2013] Initial guess for spatial extent in simple fitting = 13.44"
[Wed May 22 00:39:59 2013] source mask rpix=3.1, npix_max = 51, mask sum = 34, frac = 0.659
[Wed May 22 00:39:59 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 13.44"
[Wed May 22 00:40:00 2013] fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 22 00:40:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_src10.csv
[Wed May 22 00:40:00 2013] fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 22 00:40:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_src10.csv
[Wed May 22 00:40:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 00:40:00 2013] fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 22 00:40:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May 22 00:40:00 2013] fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 22 00:40:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May 22 00:40:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651372901_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 00:40:13 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.242665 pixels away
[Wed May 22 00:40:13 2013] Vigneting correction estimate = 1.000000
[Wed May 22 00:40:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 00:40:13 2013] Assessing source extent using major
[Wed May 22 00:40:13 2013] Source does appear to be extended
[Wed May 22 00:40:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 00:40:28 2013] Using EEF radius (= 13.44 ")to estimate initial spatial extent for simple fitting
[Wed May 22 00:40:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 00:40:28 2013] Initial guess for spatial extent in simple fitting = 13.44"
[Wed May 22 00:40:28 2013] source mask rpix=3.1, npix_max = 51, mask sum = 34, frac = 0.659
[Wed May 22 00:40:28 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 13.44"
[Wed May 22 00:40:28 2013] fullrun_mos1_xmm0651372901_pi300-10000_cl_pass1_src10.ximg exists
[Wed May 22 00:40:28 2013] fullrun_mos1_xmm0651372901_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May 22 00:40:28 2013] Fit fullrun_mos1_xmm0651372901_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed May 22 00:40:28 2013] fullrun_mos1_xmm0651372901_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May 22 00:40:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651372901_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May 22 00:40:28 2013] fullrun_mos1_xmm0651372901_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May 22 00:40:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651372901_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May 22 00:40:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651372901_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651372901_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 00:40:41 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 18.526673 pixels away
[Wed May 22 00:40:41 2013] Vigneting correction estimate = 1.000000
[Wed May 22 00:40:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 00:40:41 2013] Assessing source extent using major
[Wed May 22 00:40:41 2013] Source does appear to be extended
[Wed May 22 00:40:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 00:41:02 2013] XMMSAS src. selection expression = ellipse(15458.919449, 12720.429306, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 00:41:02 2013] Not overwriting source region fullrun_mos1_xmm0651372901_pi300-10000_pass1_cl_src11_src.reg
[Wed May 22 00:41:02 2013] Extracting stamp from image fullrun_mos1_xmm0651372901_pi300-10000_cl_sm2.00.img.gz, (141, 109) - (216, 184)
[Wed May 22 00:41:02 2013] XMMSAS bgd. selection expression = annulus(15458.919449, 12720.429306, 1087.500000, 2175.000000, X, Y)
[Wed May 22 00:41:02 2013] Writing fullrun_mos1_xmm0651372901_pi300-10000_pass1_cl_src11.gif
[Wed May 22 00:41:26 2013] Mean detx,y = (659.06, 15255.21) 
[Wed May 22 00:41:28 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 00:42:08 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 00:42:09 2013] Setting source spectrum file to fullrun_mos1_xmm0651372901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May 22 00:42:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0651372901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed May 22 00:50:45 2013] Not generating rmf since there are only 28 counts
[Wed May 22 00:50:45 2013] rmf not generated due to insufficient counts
[Wed May 22 01:05:41 2013] Updating aperture counts using extracted products
[Wed May 22 01:05:41 2013] Total counts from fullrun_mos1_xmm0651372901_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 53.00
[Wed May 22 01:05:42 2013] Total counts from fullrun_mos1_xmm0651372901_pi300-10000_pass1_cl_src11_bgd.pi.gz = 236.00
[Wed May 22 01:05:42 2013] Got source and background scale factors 978116.000000, 7260519.000000
[Wed May 22 01:05:42 2013] User source parameters:
  Position = (178.2, 146.8) = 17 14 46.54 58 37 16.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 21.2 +/- 8.3
  Background aperture counts = 31.8
  Rate = 0.002 +/- 0.0009

[Wed May 22 01:05:42 2013] Updating counts from extracted products
[Wed May 22 01:05:42 2013] Set source signif. to 21.21/5.64 = 3.76
[Wed May 22 01:05:42 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 01:05:42 2013] Using photon index=1.80, rate=0.00221, arf fullrun_mos1_xmm0651372901_pi300-10000_pass1_cl_src11.arf
[Wed May 22 01:05:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 01:05:42 2013] Updating source flux to 6.3e-14
[Wed May 22 01:05:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 01:05:51 2013] xmm0651372901/analysis//spectral/fullrun_mos1_xmm0651372901_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete