[Sat Aug  4 22:30:50 2012] Detection parameters:
  Position = (397.8, 328.0) = 17 12 7.27 58 47 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1503.8 +/- 46.6
  Background counts = 36.9
  Rate = 0.06 +/- 0.002

[Sat Aug  4 22:30:50 2012] Off-axis axis estimate = 7.52'
[Sat Aug  4 22:52:00 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 22:52:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug  4 22:52:00 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Sat Aug  4 22:52:00 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.114
[Sat Aug  4 22:52:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.19"
[Sat Aug  4 23:02:20 2012] fullrun_mos1_xmm0651370601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 23:02:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651370601_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 23:02:20 2012] fullrun_mos1_xmm0651370601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 23:02:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651370601_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 23:02:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651370601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651370601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 23:02:20 2012] fullrun_mos1_xmm0651370601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 23:02:20 2012] fullrun_mos1_xmm0651370601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 23:02:20 2012] Fit fullrun_mos1_xmm0651370601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug  4 23:24:06 2012] Spatial fit model total counts = 1288.000000, observed total counts = 1288.000000
[Sat Aug  4 23:24:06 2012] Offset between fit and detection position for source 2 = 0.410451 pixels
[Sat Aug  4 23:24:06 2012] 1280.481000 total counts/ 333.997000 bgd. counts: snr = 51.789533
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.410451 pixels
  Position = (397.5, 328.2) = 17 12 7.48 58 47 55.8
  Extent = 7.3 (6.9-7.7)", rotation angle = 0
  Source counts = 946.5 +/- 35.8
  Background counts = 334.0
  Rate = 0.04 +/- 0.002
[Sat Aug  4 23:24:06 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 23:24:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 23:24:06 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 23:24:06 2012] Source does appear to be extended
[Sat Aug  4 23:24:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 23:41:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 23:41:59 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Aug  4 23:41:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Sat Aug  4 23:41:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Sat Aug  4 23:54:20 2012] fullrun_mos1_xmm0651370601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug  4 23:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651370601_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 23:54:20 2012] fullrun_mos1_xmm0651370601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug  4 23:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651370601_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 23:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651370601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651370601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 23:54:20 2012] fullrun_mos1_xmm0651370601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug  4 23:54:20 2012] fullrun_mos1_xmm0651370601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug  4 23:54:20 2012] Fit fullrun_mos1_xmm0651370601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug  5 00:15:14 2012] Spatial fit model total counts = 1200.000000, observed total counts = 1200.000000
[Sun Aug  5 00:15:14 2012] Offset between fit and detection position for source 2 = 0.008019 pixels
[Sun Aug  5 00:15:14 2012] 1195.650000 total counts/ 258.798000 bgd. counts: snr = 58.235865
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008019 pixels
  Position = (397.5, 328.2) = 17 12 7.48 58 47 55.8
  Extent = 7.2 (6.9-7.6)", rotation angle = 0
  Source counts = 936.9 +/- 34.6
  Background counts = 258.8
  Rate = 0.04 +/- 0.002
[Sun Aug  5 00:15:14 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 00:15:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 00:15:14 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 00:15:14 2012] Source does appear to be extended
[Sun Aug  5 00:15:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 00:36:17 2012] XMMSAS src. selection expression = ellipse(34530.190600, 28503.972200, 432.352812, 432.352812, 0.000000, X, Y)
[Sun Aug  5 00:36:17 2012] Writing source region out to fullrun_mos1_xmm0651370601_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug  5 00:36:17 2012] Extracting stamp from image fullrun_mos1_xmm0651370601_pi300-10000_cl_sm2.00.img.gz, (373, 303) - (422, 353)
[Sun Aug  5 00:36:17 2012] XMMSAS bgd. selection expression = annulus(34530.190600, 28503.972200, 720.588021, 1441.176041, X, Y)
[Sun Aug  5 00:36:17 2012] Writing fullrun_mos1_xmm0651370601_pi300-10000_pass1_cl_src2.gif
[Sun Aug  5 00:36:20 2012] Mean detx,y = (-2045.58, -10337.07) 
[Sun Aug  5 00:36:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 00:36:26 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 00:36:26 2012] Setting source spectrum file to fullrun_mos1_xmm0651370601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug  5 00:36:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651370601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug  5 01:01:53 2012] Updating aperture counts using extracted products
[Sun Aug  5 01:01:53 2012] Error reading totcts from fullrun_mos1_xmm0651370601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug  5 01:01:53 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 01:01:53 2012] Using photon index=1.80, rate=0.0444, arf fullrun_mos1_xmm0651370601_pi300-10000_pass1_cl_src2.arf
[Sun Aug  5 01:01:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 01:01:53 2012] Updating source flux to 8.7e-13
[Sun Aug  5 01:02:09 2012] Reading fit data from xmm0651370601/analysis//spectral/fullrun_mos1_xmm0651370601_pi300-10000_pass1_cl_src2_pl.csv
[Sun Aug  5 01:02:09 2012] Spectral fit parameter nH value = 1.20693e+20
[Sun Aug  5 01:02:09 2012] Spectral fit parameter PhoIndex value = 2.40979
[Sun Aug  5 01:02:09 2012] Failed to get F(0.3-8.0) from xmm0651370601/analysis//spectral/fullrun_mos1_xmm0651370601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Aug  5 01:02:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 01:02:09 2012] Using Nh = 1.2e+20, photon index=2.41, rate=0.0444, arf fullrun_mos1_xmm0651370601_pi300-10000_pass1_cl_src2.arf
[Sun Aug  5 01:02:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 01:02:09 2012] Updating source flux to 7e-13