[Wed May 23 10:39:45 2012] Detection parameters:
  Position = (446.1, 240.7) = 17 14 13.43 58 53 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 13.4
  Background counts = 26.5
  Rate = 0.006 +/- 0.0009

[Wed May 23 10:39:45 2012] Off-axis axis estimate = 11.49'
[Wed May 23 10:43:59 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Wed May 23 10:43:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 10:43:59 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Wed May 23 10:43:59 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Wed May 23 10:43:59 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.18"
[Wed May 23 11:03:50 2012] fullrun_pn_xmm0651370501_pi300-10000_cl_pass0_src6.ximg exists
[Wed May 23 11:03:50 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651370501_pi300-10000_cl_pass0_src6.csv
[Wed May 23 11:03:50 2012] fullrun_pn_xmm0651370501_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed May 23 11:03:50 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651370501_pi300-10000_cl_pass0_src6.csv
[Wed May 23 11:03:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651370501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651370501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 11:03:50 2012] fullrun_pn_xmm0651370501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed May 23 11:03:50 2012] fullrun_pn_xmm0651370501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May 23 11:03:50 2012] Fit fullrun_pn_xmm0651370501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed May 23 11:20:48 2012] Spatial fit model total counts = 136.595000, observed total counts = 126.000000
[Wed May 23 11:20:48 2012] Offset between fit and detection position for source 6 = 0.263364 pixels
[Wed May 23 11:20:48 2012] 140.199600 total counts/ 117.280000 bgd. counts: snr = 2.116387
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.263364 pixels
  Position = (445.9, 240.5) = 17 14 13.54 58 53 25.0
  Extent = 3.8 (3.0-5.8)", rotation angle = 0
  Source counts = 22.9 +/- 11.8
  Background counts = 117.3
  Rate = 0.008 +/- 0.004
[Wed May 23 11:20:48 2012] Vigneting correction estimate = 1.000000
[Wed May 23 11:20:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 11:20:48 2012] Assessing source extent using major axis lower bound
[Wed May 23 11:20:48 2012] Source does appear to be extended
[Wed May 23 11:20:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 11:21:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 11:21:00 2012] Initial guess for spatial extent in simple fitting = 3.76"
[Wed May 23 11:21:00 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.807
[Wed May 23 11:21:00 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 3.76"
[Wed May 23 11:45:05 2012] fullrun_pn_xmm0651370501_pi300-10000_cl_pass1_src6.ximg exists
[Wed May 23 11:45:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651370501_pi300-10000_cl_pass1_src6.csv
[Wed May 23 11:45:05 2012] fullrun_pn_xmm0651370501_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed May 23 11:45:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651370501_pi300-10000_cl_pass1_src6.csv
[Wed May 23 11:45:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651370501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651370501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 11:45:05 2012] fullrun_pn_xmm0651370501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed May 23 11:45:05 2012] fullrun_pn_xmm0651370501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed May 23 11:45:05 2012] Fit fullrun_pn_xmm0651370501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed May 23 12:00:57 2012] Spatial fit model total counts = 121.759000, observed total counts = 110.000000
[Wed May 23 12:00:57 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 12:00:57 2012] Vigneting correction estimate = 1.000000
[Wed May 23 12:00:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 12:00:57 2012] Assessing source extent using major axis lower bound
[Wed May 23 12:00:57 2012] Source does appear to be extended
[Wed May 23 12:00:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 12:01:09 2012] XMMSAS src. selection expression = ellipse(38745.583600, 20877.022600, 225.366606, 225.366606, 0.000000, X, Y)
[Wed May 23 12:01:09 2012] Writing source region out to fullrun_pn_xmm0651370501_pi300-10000_pass1_cl_src6_src.reg
[Wed May 23 12:01:09 2012] Extracting stamp from image fullrun_pn_xmm0651370501_pi300-10000_cl_sm2.00.img.gz, (433, 228) - (459, 253)
[Wed May 23 12:01:09 2012] XMMSAS bgd. selection expression = annulus(38745.583600, 20877.022600, 375.611011, 751.222022, X, Y)
[Wed May 23 12:01:09 2012] Writing fullrun_pn_xmm0651370501_pi300-10000_pass1_cl_src6.gif
[Wed May 23 12:06:50 2012] Mean detx,y = (2534.19, -11841.52) 
[Wed May 23 12:06:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 12:07:15 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 12:07:16 2012] Setting source spectrum file to fullrun_pn_xmm0651370501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 23 12:07:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651370501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed May 23 12:34:37 2012] Not generating rmf since there are only 22 counts
[Wed May 23 12:34:37 2012] rmf not generated due to insufficient counts
[Wed May 23 12:54:13 2012] Updating aperture counts using extracted products
[Wed May 23 12:54:13 2012] Error reading totcts from fullrun_pn_xmm0651370501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 23 12:54:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 12:54:13 2012] Using photon index=1.80, rate=0.00762, arf fullrun_pn_xmm0651370501_pi300-10000_pass1_cl_src6.arf
[Wed May 23 12:54:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 12:54:13 2012] Updating source flux to 7.1e-14
[Wed May 23 12:54:36 2012] Flag p found in src. 6 procflags, skipping spectral fitting
[Wed May 23 12:54:36 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting