[Fri Jul 27 11:48:09 2012] Detection parameters:
  Position = (293.2, 275.9) = 11 17 6.60 44 13 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4500.4 +/- 79.6
  Background counts = 30.8
  Rate = 0.2 +/- 0.003

[Fri Jul 27 11:48:09 2012] Off-axis axis estimate = 1.68'
[Fri Jul 27 12:28:44 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 12:28:44 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jul 27 12:28:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Fri Jul 27 12:28:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jul 27 12:48:39 2012] fullrun_mos2_xmm0651331001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 12:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651331001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 12:48:39 2012] fullrun_mos2_xmm0651331001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 12:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651331001_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 12:48:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651331001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651331001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:48:39 2012] fullrun_mos2_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 12:48:39 2012] fullrun_mos2_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 12:48:39 2012] Fit fullrun_mos2_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 27 12:48:49 2012] Spatial fit model total counts = 3905.990000, observed total counts = 3798.000000
[Fri Jul 27 12:48:49 2012] Offset between fit and detection position for source 1 = 0.071633 pixels
[Fri Jul 27 12:48:49 2012] 3900.735000 total counts/ 976.125000 bgd. counts: snr = 93.608491
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.071633 pixels
  Position = (293.3, 275.9) = 11 17 6.58 44 13 33.4
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 2924.6 +/- 62.5
  Background counts = 976.1
  Rate = 0.1 +/- 0.003
[Fri Jul 27 12:48:49 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 12:48:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 12:48:49 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 12:48:49 2012] Source does appear to be extended
[Fri Jul 27 12:48:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 13:32:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 13:32:17 2012] Initial guess for spatial extent in simple fitting = 5.13"
[Fri Jul 27 13:32:17 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.064
[Fri Jul 27 13:32:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.13"
[Fri Jul 27 13:50:12 2012] fullrun_mos2_xmm0651331001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 13:50:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651331001_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 13:50:12 2012] fullrun_mos2_xmm0651331001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 13:50:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651331001_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 13:50:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651331001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651331001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 13:50:12 2012] fullrun_mos2_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 13:50:12 2012] fullrun_mos2_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 13:50:12 2012] Fit fullrun_mos2_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 27 13:50:25 2012] Spatial fit model total counts = 3906.540000, observed total counts = 3798.000000
[Fri Jul 27 13:50:25 2012] Offset between fit and detection position for source 1 = 0.000111 pixels
[Fri Jul 27 13:50:25 2012] 3901.188000 total counts/ 978.688000 bgd. counts: snr = 93.418392
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000111 pixels
  Position = (293.3, 275.9) = 11 17 6.58 44 13 33.4
  Extent = 5.1 (4.9-5.3)", rotation angle = 0
  Source counts = 2922.5 +/- 62.5
  Background counts = 978.7
  Rate = 0.1 +/- 0.003
[Fri Jul 27 13:50:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 13:50:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 13:50:25 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 13:50:25 2012] Source does appear to be extended
[Fri Jul 27 13:50:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 14:50:35 2012] Counts = 2922.500000, rescaling region sizes by 2.000000
[Fri Jul 27 14:50:35 2012] XMMSAS src. selection expression = ellipse(25466.177400, 23951.293000, 614.521218, 614.521218, 0.000000, X, Y)
[Fri Jul 27 14:50:35 2012] Writing source region out to fullrun_mos2_xmm0651331001_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 27 14:50:35 2012] Extracting stamp from image fullrun_mos2_xmm0651331001_pi300-10000_cl_sm2.00.img.gz, (258, 241) - (329, 311)
[Fri Jul 27 14:50:35 2012] XMMSAS bgd. selection expression = annulus(25466.177400, 23951.293000, 2048.404059, 4096.808118, X, Y)
[Fri Jul 27 14:50:35 2012] Writing fullrun_mos2_xmm0651331001_pi300-10000_pass1_cl_src1.gif
[Fri Jul 27 14:50:39 2012] Mean detx,y = (-80.11, -68.56) 
[Fri Jul 27 14:50:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 14:51:53 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 14:51:53 2012] Setting source spectrum file to fullrun_mos2_xmm0651331001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 14:51:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651331001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 27 15:05:57 2012] Updating aperture counts using extracted products
[Fri Jul 27 15:05:57 2012] Error reading totcts from fullrun_mos2_xmm0651331001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 15:05:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 15:05:57 2012] Using photon index=1.80, rate=0.12, arf fullrun_mos2_xmm0651331001_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 15:05:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 15:05:57 2012] Updating source flux to 1.3e-12
[Fri Jul 27 15:07:11 2012] Reading fit data from xmm0651331001/analysis//spectral/fullrun_mos2_xmm0651331001_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 27 15:07:11 2012] Spectral fit parameter nH value = 2.70811e+21
[Fri Jul 27 15:07:11 2012] Spectral fit parameter PhoIndex value = 1.2703
[Fri Jul 27 15:07:11 2012] Failed to get F(0.3-8.0) from xmm0651331001/analysis//spectral/fullrun_mos2_xmm0651331001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 15:07:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 15:07:11 2012] Using Nh = 2.7e+21, photon index=1.27, rate=0.12, arf fullrun_mos2_xmm0651331001_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 15:07:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 15:07:11 2012] Updating source flux to 2.1e-12