[Fri Jul 27 11:47:37 2012] Detection parameters:
  Position = (433.5, 349.0) = 11 16 9.75 44 18 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.1 +/- 21.0
  Background counts = 23.6
  Rate = 0.01 +/- 0.0008

[Fri Jul 27 11:47:37 2012] Off-axis axis estimate = 10.46'
[Fri Jul 27 12:21:14 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 12:21:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 12:21:14 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Fri Jul 27 12:21:14 2012] source mask rpix=2.7, npix_max = 40, mask sum = 39, frac = 0.964
[Fri Jul 27 12:21:14 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.66"
[Fri Jul 27 12:28:44 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 27 12:28:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 27 12:28:44 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 27 12:28:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 27 12:28:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:28:44 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 27 12:28:44 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 27 12:28:44 2012] Fit fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jul 27 12:48:46 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.813240 pixels away
[Fri Jul 27 12:48:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 12:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 12:48:46 2012] Assessing source extent using major
[Fri Jul 27 12:48:46 2012] Source does appear to be extended
[Fri Jul 27 12:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 13:25:51 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 13:25:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 13:25:51 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Fri Jul 27 13:25:51 2012] source mask rpix=2.7, npix_max = 40, mask sum = 39, frac = 0.964
[Fri Jul 27 13:25:51 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.66"
[Fri Jul 27 13:32:17 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 27 13:32:17 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 27 13:32:17 2012] Fit fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Jul 27 13:32:17 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 27 13:32:17 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 27 13:32:17 2012] Fit fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jul 27 13:50:22 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.511391 pixels away
[Fri Jul 27 13:50:22 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 13:50:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 13:50:22 2012] Assessing source extent using major
[Fri Jul 27 13:50:22 2012] Source does appear to be extended
[Fri Jul 27 13:50:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 14:41:01 2012] XMMSAS src. selection expression = ellipse(37665.476959, 30314.515930, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 14:41:01 2012] Writing source region out to fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 27 14:41:01 2012] Extracting stamp from image fullrun_mos1_xmm0651331001_pi300-10000_cl_sm2.00.img.gz, (396, 312) - (471, 387)
[Fri Jul 27 14:41:01 2012] XMMSAS bgd. selection expression = annulus(37665.476959, 30314.515930, 1087.500000, 2175.000000, X, Y)
[Fri Jul 27 14:41:01 2012] Writing fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src4.gif
[Fri Jul 27 14:42:15 2012] Mean detx,y = (-9.27, -13789.11) 
[Fri Jul 27 14:42:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 14:42:49 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 14:42:49 2012] Setting source spectrum file to fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 27 14:42:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 27 14:49:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 27 14:49:56 2012] rmf not generated due to insufficient counts
[Fri Jul 27 15:05:56 2012] Updating aperture counts using extracted products
[Fri Jul 27 15:05:56 2012] Error reading totcts from fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 27 15:05:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 15:05:57 2012] Using photon index=1.80, rate=0.00957, arf fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src4.arf
[Fri Jul 27 15:05:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 15:05:57 2012] Updating source flux to 3.6e-13
[Fri Jul 27 15:05:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting