[Fri Jul 27 11:47:37 2012] Detection parameters:
  Position = (114.0, 335.9) = 11 18 19.23 44 17 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.0 +/- 12.8
  Background counts = 20.3
  Rate = 0.003 +/- 0.0005

[Fri Jul 27 11:47:37 2012] Off-axis axis estimate = 13.65'
[Fri Jul 27 12:21:14 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 12:21:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 12:21:14 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Fri Jul 27 12:21:14 2012] source mask rpix=3.0, npix_max = 50, mask sum = 54, frac = 1.073
[Fri Jul 27 12:21:14 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.25"
[Fri Jul 27 12:28:44 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul 27 12:28:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 12:28:44 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul 27 12:28:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 12:28:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:28:44 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 27 12:28:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 27 12:28:44 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 27 12:28:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 27 12:28:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651331001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 12:48:46 2012] Source 3 is offset by 0.661104 and 7.213486 pixels which is larger than
2 X fitted extent = 1.526855 x 1.526855, not incorporating fit results
[Fri Jul 27 12:48:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 12:48:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 12:48:46 2012] Assessing source extent using major
[Fri Jul 27 12:48:46 2012] Source does appear to be extended
[Fri Jul 27 12:48:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 13:25:51 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 13:25:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 13:25:51 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Fri Jul 27 13:25:51 2012] source mask rpix=3.0, npix_max = 50, mask sum = 54, frac = 1.073
[Fri Jul 27 13:25:51 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.25"
[Fri Jul 27 13:32:17 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 27 13:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_src4.csv
[Fri Jul 27 13:32:17 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 27 13:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_src4.csv
[Fri Jul 27 13:32:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 13:32:17 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 27 13:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul 27 13:32:17 2012] fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 27 13:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul 27 13:32:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651331001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 13:50:22 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 18.012541 pixels away
[Fri Jul 27 13:50:22 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 13:50:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 13:50:22 2012] Assessing source extent using major
[Fri Jul 27 13:50:22 2012] Source does appear to be extended
[Fri Jul 27 13:50:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 14:41:01 2012] XMMSAS src. selection expression = ellipse(9867.480850, 29172.569244, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 14:41:01 2012] Writing source region out to fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 27 14:41:01 2012] Extracting stamp from image fullrun_mos1_xmm0651331001_pi300-10000_cl_sm2.00.img.gz, (76, 298) - (151, 373)
[Fri Jul 27 14:41:01 2012] XMMSAS bgd. selection expression = annulus(9867.480850, 29172.569244, 1087.500000, 2175.000000, X, Y)
[Fri Jul 27 14:41:01 2012] Writing fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src3.gif
[Fri Jul 27 14:43:25 2012] Mean detx,y = (-11561.78, 11531.78) 
[Fri Jul 27 14:43:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 14:43:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 14:43:45 2012] Setting source spectrum file to fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 14:43:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 27 14:50:24 2012] Not generating rmf since there are only 70 counts
[Fri Jul 27 14:50:24 2012] rmf not generated due to insufficient counts
[Fri Jul 27 15:05:57 2012] Updating aperture counts using extracted products
[Fri Jul 27 15:05:57 2012] Error reading totcts from fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 15:05:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 15:05:57 2012] Using photon index=1.80, rate=0.00264, arf fullrun_mos1_xmm0651331001_pi300-10000_pass1_cl_src3.arf
[Fri Jul 27 15:05:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 15:05:57 2012] Updating source flux to 6.6e-14
[Fri Jul 27 15:05:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting