[Fri Jun 21 20:38:24 2013] Detection parameters:
  Position = (419.5, 209.1) = 11 16 16.55 44 8 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.5 +/- 18.2
  Background counts = 23.8
  Rate = 0.006 +/- 0.0006

[Fri Jun 21 20:38:24 2013] Off-axis axis estimate = 10.91'
[Fri Jun 21 20:38:39 2013] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 20:38:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 20:38:39 2013] Initial guess for spatial extent in simple fitting = 11.88"
[Fri Jun 21 20:38:39 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.006
[Fri Jun 21 20:38:39 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.88"
[Fri Jun 21 20:38:39 2013] fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun 21 20:38:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_src4.csv
[Fri Jun 21 20:38:39 2013] fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun 21 20:38:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_src4.csv
[Fri Jun 21 20:38:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:38:40 2013] fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun 21 20:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 21 20:38:40 2013] fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun 21 20:38:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 21 20:38:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651330801_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:38:47 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.145776 pixels away
[Fri Jun 21 20:38:47 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 20:38:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 20:38:47 2013] Assessing source extent using major
[Fri Jun 21 20:38:47 2013] Source does appear to be extended
[Fri Jun 21 20:38:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 20:38:57 2013] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 20:38:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 20:38:57 2013] Initial guess for spatial extent in simple fitting = 11.88"
[Fri Jun 21 20:38:57 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.006
[Fri Jun 21 20:38:57 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.88"
[Fri Jun 21 20:38:58 2013] fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 21 20:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_src4.csv
[Fri Jun 21 20:38:58 2013] fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 21 20:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_src4.csv
[Fri Jun 21 20:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:38:58 2013] fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 21 20:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 21 20:38:58 2013] fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 21 20:38:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 21 20:38:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651330801_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:39:05 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.758959 pixels away
[Fri Jun 21 20:39:05 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 20:39:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 20:39:05 2013] Assessing source extent using major
[Fri Jun 21 20:39:05 2013] Source does appear to be extended
[Fri Jun 21 20:39:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 21:14:52 2013] XMMSAS src. selection expression = ellipse(36444.062592, 18144.210770, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 21:14:52 2013] Not overwriting source region fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun 21 21:14:52 2013] Extracting stamp from image fullrun_mos1_xmm0651330801_pi300-10000_cl_sm2.00.img.gz, (382, 172) - (457, 247)
[Fri Jun 21 21:14:52 2013] XMMSAS bgd. selection expression = annulus(36444.062592, 18144.210770, 1087.500000, 2175.000000, X, Y)
[Fri Jun 21 21:14:52 2013] Writing fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7.gif
[Fri Jun 21 21:14:52 2013] ../../xmm0651330801/products/events/fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0651330801/products/events/fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Jun 21 21:14:52 2013] Mean detx,y = (10686.69, -6304.64) 
[Fri Jun 21 21:14:52 2013] ../../xmm0651330801/products/images/fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_src.img and ../../xmm0651330801/products/images/fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Jun 21 21:14:52 2013] ../../xmm0651330801/products/spectra/fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_src.pi and ../../xmm0651330801/products/spectra/fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Jun 21 21:14:52 2013] Setting source spectrum file to fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_src.pi.gz
[Fri Jun 21 21:14:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jun 21 21:14:52 2013] ../../xmm0651330801/products/lightcurves/fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0651330801/products/lightcurves/fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Jun 21 21:14:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 21:14:55 2013] rmf not generated due to insufficient counts
[Fri Jun 21 21:15:54 2013] Updating aperture counts using extracted products
[Fri Jun 21 21:15:54 2013] Total counts from fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_src.pi.gz = 232.00
[Fri Jun 21 21:15:54 2013] Total counts from fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_bgd.pi.gz = 694.00
[Fri Jun 21 21:15:54 2013] Got source and background scale factors 1323000.000000, 10497587.000000
[Fri Jun 21 21:15:54 2013] User source parameters:
  Position = (419.5, 209.1) = 11 16 16.55 44 8 45.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 144.5 +/- 16.3
  Background aperture counts = 87.5
  Rate = 0.005 +/- 0.0006

[Fri Jun 21 21:15:54 2013] Updating counts from extracted products
[Fri Jun 21 21:15:54 2013] Set source signif. to 144.54/9.35 = 15.45
[Fri Jun 21 21:15:55 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 21:15:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 21:16:00 2013] xmm0651330801/analysis//spectral/fullrun_mos1_xmm0651330801_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete