[Tue May 28 00:25:26 2013] Detection parameters:
  Position = (239.6, 436.3) = 11 17 29.53 44 25 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.9 +/- 11.6
  Background counts = 18.1
  Rate = 0.003 +/- 0.0004

[Tue May 28 00:25:26 2013] Off-axis axis estimate = 10.87'
[Tue May 28 01:23:57 2013] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Tue May 28 01:23:57 2013] Initial guess for spatial extent in simple fitting = 11.86"
[Tue May 28 01:23:57 2013] source mask rpix=2.7, npix_max = 41, mask sum = 48, frac = 1.152
[Tue May 28 01:23:57 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.86"
[Tue May 28 01:50:51 2013] fullrun_mos2_xmm0651330701_pi300-10000_cl_pass0_src9.ximg exists
[Tue May 28 01:50:51 2013] fullrun_mos2_xmm0651330701_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue May 28 01:50:51 2013] Fit fullrun_mos2_xmm0651330701_pi300-10000_cl_pass0_src9 appears to have run properly
[Tue May 28 01:50:51 2013] fullrun_mos2_xmm0651330701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue May 28 01:50:51 2013] fullrun_mos2_xmm0651330701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue May 28 01:50:51 2013] Fit fullrun_mos2_xmm0651330701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue May 28 01:51:04 2013] Spatial fit model total counts = 141.475000, observed total counts = 138.000000
[Tue May 28 01:51:04 2013] Offset between fit and detection position for source 13 = 0.262096 pixels
[Tue May 28 01:51:04 2013] 142.969300 total counts/ 109.686000 bgd. counts: snr = 3.177977
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.262096 pixels
  Position = (239.5, 436.5) = 11 17 29.54 44 25 10.1
  Extent = 3.0" x 3.0", rotation angle = 0
  Source counts = 33.3 +/- 12.0
  Background counts = 109.7
  Rate = 0.001 +/- 0.0005
[Tue May 28 01:51:04 2013] Vigneting correction estimate = 1.000000
[Tue May 28 01:51:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 01:51:04 2013] Assessing source extent using major
[Tue May 28 01:51:04 2013] Source does appear to be extended
[Tue May 28 01:51:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 02:39:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 28 02:39:30 2013] Initial guess for spatial extent in simple fitting = 2.97"
[Tue May 28 02:39:30 2013] source mask rpix=0.7, npix_max = 5, mask sum = 9, frac = 1.611
[Tue May 28 02:39:30 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 2.97"
[Tue May 28 03:10:23 2013] fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_src9.ximg exists
[Tue May 28 03:10:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_src9.csv
[Tue May 28 03:10:23 2013] fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue May 28 03:10:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_src9.csv
[Tue May 28 03:10:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 03:10:23 2013] fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue May 28 03:10:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue May 28 03:10:23 2013] fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue May 28 03:10:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue May 28 03:10:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330701_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 03:10:38 2013] Spatial fit model total counts = 5.840510, observed total counts = 138.000000
[Tue May 28 03:10:38 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 28 03:10:38 2013] Vigneting correction estimate = 1.000000
[Tue May 28 03:10:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 03:10:38 2013] Assessing source extent using major
[Tue May 28 03:10:38 2013] Source does appear to be extended
[Tue May 28 03:10:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 04:10:46 2013] XMMSAS src. selection expression = ellipse(20791.221200, 37930.323800, 177.930005, 177.930005, 0.000000, X, Y)
[Tue May 28 04:10:46 2013] Writing source region out to fullrun_mos2_xmm0651330701_pi300-10000_pass1_cl_src13_src.reg
[Tue May 28 04:10:46 2013] Extracting stamp from image fullrun_mos2_xmm0651330701_pi300-10000_cl_sm2.00.img.gz, (229, 426) - (250, 447)
[Tue May 28 04:10:46 2013] XMMSAS bgd. selection expression = annulus(20791.221200, 37930.323800, 296.550009, 593.100017, X, Y)
[Tue May 28 04:10:46 2013] Writing fullrun_mos2_xmm0651330701_pi300-10000_pass1_cl_src13.gif
[Tue May 28 04:14:23 2013] Mean detx,y = (3292.97, -14513.76) 
[Tue May 28 04:14:26 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 04:14:38 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 04:14:39 2013] Setting source spectrum file to fullrun_mos2_xmm0651330701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue May 28 04:14:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0651330701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue May 28 04:23:08 2013] Not generating rmf since there are only 33 counts
[Tue May 28 04:23:08 2013] rmf not generated due to insufficient counts
[Tue May 28 04:24:54 2013] Updating aperture counts using extracted products
[Tue May 28 04:24:54 2013] Total counts from fullrun_mos2_xmm0651330701_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 38.00
[Tue May 28 04:24:54 2013] Total counts from fullrun_mos2_xmm0651330701_pi300-10000_pass1_cl_src13_bgd.pi.gz = 46.00
[Tue May 28 04:24:54 2013] Got source and background scale factors 86280.000000, 727160.000000
[Tue May 28 04:24:54 2013] User source parameters:
  Position = (239.5, 436.5) = 11 17 29.54 44 25 10.1
  Extent = 3.0" x 3.0", rotation angle = 0
  Source aperture counts = 32.5 +/- 7.2
  Background aperture counts = 5.5
  Rate = 0.001 +/- 0.0003

[Tue May 28 04:24:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 04:24:55 2013] Using photon index=1.80, rate=0.00138, arf fullrun_mos2_xmm0651330701_pi300-10000_pass1_cl_src13.arf
[Tue May 28 04:24:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 04:24:55 2013] Updating source flux to 6.6e-14
[Tue May 28 04:24:59 2013] Flag p found in src. 13 procflags, skipping spectral fitting
[Tue May 28 04:24:59 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 28 04:25:01 2013] xmm0651330701/analysis//spectral/fullrun_mos2_xmm0651330701_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete