[Sat Jun  2 21:31:06 2012] Detection parameters:
  Position = (298.6, 275.7) = 11 17 6.50 44 13 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8781.7 +/- 110.7
  Background counts = 78.9
  Rate = 0.3 +/- 0.004

[Sat Jun  2 21:31:06 2012] Off-axis axis estimate = 1.65'
[Sat Jun  2 21:52:59 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 21:52:59 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Jun  2 21:52:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Sat Jun  2 21:52:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat Jun  2 21:59:34 2012] fullrun_mos2_xmm0651330601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  2 21:59:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651330601_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 21:59:34 2012] fullrun_mos2_xmm0651330601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  2 21:59:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0651330601_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 21:59:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 21:59:34 2012] fullrun_mos2_xmm0651330601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  2 21:59:34 2012] fullrun_mos2_xmm0651330601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  2 21:59:34 2012] Fit fullrun_mos2_xmm0651330601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  2 21:59:40 2012] Spatial fit model total counts = 6484.190000, observed total counts = 6307.000000
[Sat Jun  2 21:59:40 2012] Offset between fit and detection position for source 1 = 0.144458 pixels
[Sat Jun  2 21:59:40 2012] 6465.410000 total counts/ 1588.040000 bgd. counts: snr = 122.392550
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.144458 pixels
  Position = (298.6, 275.6) = 11 17 6.48 44 13 33.9
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 4877.4 +/- 80.4
  Background counts = 1588.0
  Rate = 0.2 +/- 0.003
[Sat Jun  2 21:59:40 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 21:59:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 21:59:40 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 21:59:40 2012] Source does appear to be extended
[Sat Jun  2 21:59:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 22:22:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  2 22:22:28 2012] Initial guess for spatial extent in simple fitting = 5.20"
[Sat Jun  2 22:22:28 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.784
[Sat Jun  2 22:22:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.20"
[Sat Jun  2 22:28:42 2012] fullrun_mos2_xmm0651330601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  2 22:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330601_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 22:28:42 2012] fullrun_mos2_xmm0651330601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  2 22:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330601_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 22:28:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 22:28:42 2012] fullrun_mos2_xmm0651330601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  2 22:28:42 2012] fullrun_mos2_xmm0651330601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  2 22:28:42 2012] Fit fullrun_mos2_xmm0651330601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  2 22:28:46 2012] Spatial fit model total counts = 6429.970000, observed total counts = 6300.000000
[Sat Jun  2 22:28:46 2012] Offset between fit and detection position for source 1 = 0.017983 pixels
[Sat Jun  2 22:28:46 2012] 6460.120000 total counts/ 1556.460000 bgd. counts: snr = 124.294344
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.017983 pixels
  Position = (298.6, 275.6) = 11 17 6.48 44 13 33.9
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 4903.7 +/- 80.4
  Background counts = 1556.5
  Rate = 0.2 +/- 0.003
[Sat Jun  2 22:28:46 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 22:28:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 22:28:46 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 22:28:46 2012] Source does appear to be extended
[Sat Jun  2 22:28:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 23:08:45 2012] Counts = 4903.660000, rescaling region sizes by 2.000000
[Sat Jun  2 23:08:45 2012] XMMSAS src. selection expression = ellipse(25930.902600, 23926.520200, 628.328418, 628.328418, 0.000000, X, Y)
[Sat Jun  2 23:08:45 2012] Writing source region out to fullrun_mos2_xmm0651330601_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  2 23:08:45 2012] Extracting stamp from image fullrun_mos2_xmm0651330601_pi300-10000_cl_sm2.00.img.gz, (263, 239) - (335, 312)
[Sat Jun  2 23:08:45 2012] XMMSAS bgd. selection expression = annulus(25930.902600, 23926.520200, 2094.428060, 4188.856121, X, Y) && !ellipse(25149.457600, 21727.670600, 355.384010, 355.384010, 0.000000, X, Y)
[Sat Jun  2 23:08:45 2012] Writing fullrun_mos2_xmm0651330601_pi300-10000_pass1_cl_src1.gif
[Sat Jun  2 23:08:47 2012] Mean detx,y = (5.07, -37.16) 
[Sat Jun  2 23:08:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 23:09:49 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 23:09:49 2012] Setting source spectrum file to fullrun_mos2_xmm0651330601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 23:09:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651330601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  2 23:22:33 2012] Updating aperture counts using extracted products
[Sat Jun  2 23:22:33 2012] Error reading totcts from fullrun_mos2_xmm0651330601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 23:22:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 23:22:34 2012] Using photon index=1.80, rate=0.207, arf fullrun_mos2_xmm0651330601_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 23:22:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 23:22:34 2012] Updating source flux to 2.2e-12
[Sat Jun  2 23:23:25 2012] Reading fit data from xmm0651330601/analysis//spectral/fullrun_mos2_xmm0651330601_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  2 23:23:25 2012] Spectral fit parameter nH value = 3.58387e+21
[Sat Jun  2 23:23:25 2012] Spectral fit parameter PhoIndex value = 1.47081
[Sat Jun  2 23:23:25 2012] Failed to get F(0.3-8.0) from xmm0651330601/analysis//spectral/fullrun_mos2_xmm0651330601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 23:23:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 23:23:25 2012] Using Nh = 3.6e+21, photon index=1.47, rate=0.207, arf fullrun_mos2_xmm0651330601_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 23:23:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 23:23:25 2012] Updating source flux to 3.4e-12