[Wed Jul 25 19:39:20 2012] Detection parameters:
  Position = (272.1, 129.1) = 11 17 18.20 43 59 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.8 +/- 17.2
  Background counts = 77.3
  Rate = 0.003 +/- 0.0005

[Wed Jul 25 19:39:20 2012] Off-axis axis estimate = 12.43'
[Wed Jul 25 19:55:40 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 19:55:40 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Wed Jul 25 19:55:40 2012] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.840
[Wed Jul 25 19:55:40 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.64"
[Wed Jul 25 20:12:35 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jul 25 20:12:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src7.csv
[Wed Jul 25 20:12:35 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jul 25 20:12:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src7.csv
[Wed Jul 25 20:12:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 20:12:35 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jul 25 20:12:35 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jul 25 20:12:35 2012] Fit fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jul 25 20:12:40 2012] Warning, spatial fit 7 centroid is now closest to src. 9
[Wed Jul 25 20:12:40 2012] Source 12 is offset by 1.734747 and -6.644495 pixels which is larger than
2 X fitted extent = 1.441660 x 1.441660, not incorporating fit results
[Wed Jul 25 20:12:40 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 20:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 20:12:40 2012] Assessing source extent using major
[Wed Jul 25 20:12:40 2012] Source does appear to be extended
[Wed Jul 25 20:12:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 20:25:17 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 20:25:17 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Wed Jul 25 20:25:17 2012] source mask rpix=2.9, npix_max = 46, mask sum = 39, frac = 0.840
[Wed Jul 25 20:25:17 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.64"
[Wed Jul 25 20:44:42 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jul 25 20:44:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src7.csv
[Wed Jul 25 20:44:42 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jul 25 20:44:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src7.csv
[Wed Jul 25 20:44:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 20:44:42 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jul 25 20:44:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Jul 25 20:44:42 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jul 25 20:44:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Jul 25 20:44:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 20:44:47 2012] Source 12 is offset by 2.064570 and -4.256607 pixels which is larger than
2 X fitted extent = 2.062193 x 2.062193, not incorporating fit results
[Wed Jul 25 20:44:47 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 20:44:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 20:44:47 2012] Assessing source extent using major
[Wed Jul 25 20:44:47 2012] Source does appear to be extended
[Wed Jul 25 20:44:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 21:08:12 2012] XMMSAS src. selection expression = ellipse(23626.375000, 11179.251175, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 21:08:12 2012] Writing source region out to fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src12_src.reg
[Wed Jul 25 21:08:12 2012] Extracting stamp from image fullrun_mos2_xmm0651330301_pi300-10000_cl_sm2.00.img.gz, (235, 92) - (310, 167)
[Wed Jul 25 21:08:12 2012] XMMSAS bgd. selection expression = annulus(23626.375000, 11179.251175, 1087.500000, 2175.000000, X, Y) && !ellipse(24362.309296, 11265.364395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22102.996185, 11543.984497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25414.380585, 11218.053101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22521.229675, 11663.309479, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 21:08:12 2012] Writing fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src12.gif
[Wed Jul 25 21:09:30 2012] Mean detx,y = (10006.63, -13474.85) 
[Wed Jul 25 21:09:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 21:09:38 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 21:09:38 2012] Setting source spectrum file to fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 25 21:09:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jul 25 21:15:07 2012] Not generating rmf since there are only 90 counts
[Wed Jul 25 21:15:07 2012] rmf not generated due to insufficient counts
[Wed Jul 25 21:16:52 2012] Updating aperture counts using extracted products
[Wed Jul 25 21:16:52 2012] Error reading totcts from fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 25 21:16:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 21:16:52 2012] Using photon index=1.80, rate=0.00261, arf fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src12.arf
[Wed Jul 25 21:16:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 21:16:52 2012] Updating source flux to 9.7e-14
[Wed Jul 25 21:16:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting