[Wed Jul 25 19:39:20 2012] Detection parameters:
  Position = (254.6, 133.2) = 11 17 25.26 43 59 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.4 +/- 17.7
  Background counts = 83.9
  Rate = 0.002 +/- 0.0005

[Wed Jul 25 19:39:20 2012] Off-axis axis estimate = 12.39'
[Wed Jul 25 19:55:40 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 19:55:40 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Wed Jul 25 19:55:40 2012] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.015
[Wed Jul 25 19:55:40 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.62"
[Wed Jul 25 20:12:35 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jul 25 20:12:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src10.csv
[Wed Jul 25 20:12:35 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jul 25 20:12:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src10.csv
[Wed Jul 25 20:12:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 20:12:36 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jul 25 20:12:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jul 25 20:12:36 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jul 25 20:12:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jul 25 20:12:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 20:12:40 2012] Warning, spatial fit 10 centroid is now closest to src. 10
[Wed Jul 25 20:12:40 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 20:12:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 20:12:40 2012] Assessing source extent using major
[Wed Jul 25 20:12:40 2012] Source does appear to be extended
[Wed Jul 25 20:12:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 20:12:40 2012] Source is confused with source 10
[Wed Jul 25 20:25:17 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 20:25:17 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Wed Jul 25 20:25:17 2012] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.015
[Wed Jul 25 20:25:17 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.62"
[Wed Jul 25 20:44:42 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src10.ximg exists
[Wed Jul 25 20:44:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src10.csv
[Wed Jul 25 20:44:42 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Jul 25 20:44:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src10.csv
[Wed Jul 25 20:44:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 20:44:43 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Jul 25 20:44:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Jul 25 20:44:43 2012] fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Jul 25 20:44:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Jul 25 20:44:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 20:44:47 2012] Warning, spatial fit 10 centroid is now closest to src. 10
[Wed Jul 25 20:44:47 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 20:44:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 20:44:47 2012] Assessing source extent using major
[Wed Jul 25 20:44:47 2012] Source does appear to be extended
[Wed Jul 25 20:44:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 21:08:12 2012] XMMSAS src. selection expression = ellipse(22102.996185, 11543.984497, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 21:08:12 2012] Writing source region out to fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src11_src.reg
[Wed Jul 25 21:08:12 2012] Extracting stamp from image fullrun_mos2_xmm0651330301_pi300-10000_cl_sm2.00.img.gz, (217, 96) - (292, 171)
[Wed Jul 25 21:08:12 2012] XMMSAS bgd. selection expression = annulus(22102.996185, 11543.984497, 1087.500000, 2175.000000, X, Y) && !ellipse(24362.309296, 11265.364395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23626.375000, 11179.251175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22521.229675, 11663.309479, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 21:08:12 2012] Writing fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src11.gif
[Wed Jul 25 21:10:18 2012] Mean detx,y = (11220.04, -12486.55) 
[Wed Jul 25 21:10:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 21:10:34 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 21:10:34 2012] Setting source spectrum file to fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jul 25 21:10:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jul 25 21:15:33 2012] Not generating rmf since there are only 84 counts
[Wed Jul 25 21:15:33 2012] rmf not generated due to insufficient counts
[Wed Jul 25 21:16:52 2012] Updating aperture counts using extracted products
[Wed Jul 25 21:16:52 2012] Error reading totcts from fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jul 25 21:16:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 21:16:52 2012] Using photon index=1.80, rate=0.00243, arf fullrun_mos2_xmm0651330301_pi300-10000_pass1_cl_src11.arf
[Wed Jul 25 21:16:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 21:16:52 2012] Updating source flux to 8.3e-14
[Wed Jul 25 21:16:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting