[Wed Jul 25 19:39:00 2012] Detection parameters:
  Position = (441.5, 392.2) = 11 16 9.62 44 18 44.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 372.8 +/- 29.9
  Background counts = 137.9
  Rate = 0.01 +/- 0.0009

[Wed Jul 25 19:39:00 2012] Off-axis axis estimate = 12.40'
[Wed Jul 25 19:50:03 2012] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 19:50:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 25 19:50:03 2012] Initial guess for spatial extent in simple fitting = 12.63"
[Wed Jul 25 19:50:03 2012] source mask rpix=2.9, npix_max = 46, mask sum = 43, frac = 0.928
[Wed Jul 25 19:50:03 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.63"
[Wed Jul 25 19:55:39 2012] fullrun_mos1_xmm0651330301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jul 25 19:55:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330301_pi300-10000_cl_pass0_src2.csv
[Wed Jul 25 19:55:39 2012] fullrun_mos1_xmm0651330301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jul 25 19:55:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651330301_pi300-10000_cl_pass0_src2.csv
[Wed Jul 25 19:55:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651330301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651330301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 19:55:39 2012] fullrun_mos1_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jul 25 19:55:39 2012] fullrun_mos1_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jul 25 19:55:39 2012] Fit fullrun_mos1_xmm0651330301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jul 25 20:12:38 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.479483 pixels away
[Wed Jul 25 20:12:38 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 20:12:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 20:12:38 2012] Assessing source extent using major
[Wed Jul 25 20:12:38 2012] Source does appear to be extended
[Wed Jul 25 20:12:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 20:20:20 2012] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 20:20:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 25 20:20:20 2012] Initial guess for spatial extent in simple fitting = 12.63"
[Wed Jul 25 20:20:20 2012] source mask rpix=2.9, npix_max = 46, mask sum = 43, frac = 0.928
[Wed Jul 25 20:20:20 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.63"
[Wed Jul 25 20:25:17 2012] fullrun_mos1_xmm0651330301_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jul 25 20:25:17 2012] fullrun_mos1_xmm0651330301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jul 25 20:25:17 2012] Fit fullrun_mos1_xmm0651330301_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Jul 25 20:25:17 2012] fullrun_mos1_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jul 25 20:25:17 2012] fullrun_mos1_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jul 25 20:25:17 2012] Fit fullrun_mos1_xmm0651330301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jul 25 20:44:45 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.693181 pixels away
[Wed Jul 25 20:44:45 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 20:44:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 20:44:45 2012] Assessing source extent using major
[Wed Jul 25 20:44:45 2012] Source does appear to be extended
[Wed Jul 25 20:44:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 21:02:23 2012] XMMSAS src. selection expression = ellipse(38361.572540, 34069.361908, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 21:02:23 2012] Writing source region out to fullrun_mos1_xmm0651330301_pi300-10000_pass1_cl_src3_src.reg
[Wed Jul 25 21:02:23 2012] Extracting stamp from image fullrun_mos1_xmm0651330301_pi300-10000_cl_sm2.00.img.gz, (404, 355) - (479, 430)
[Wed Jul 25 21:02:23 2012] XMMSAS bgd. selection expression = annulus(38361.572540, 34069.361908, 1087.500000, 2175.000000, X, Y)
[Wed Jul 25 21:02:23 2012] Writing fullrun_mos1_xmm0651330301_pi300-10000_pass1_cl_src3.gif
[Wed Jul 25 21:02:34 2012] Mean detx,y = (-98.83, 13466.22) 
[Wed Jul 25 21:02:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 21:02:53 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 21:02:54 2012] Setting source spectrum file to fullrun_mos1_xmm0651330301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 25 21:02:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651330301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jul 25 21:07:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 21:07:43 2012] rmf not generated due to insufficient counts
[Wed Jul 25 21:16:51 2012] Updating aperture counts using extracted products
[Wed Jul 25 21:16:51 2012] Error reading totcts from fullrun_mos1_xmm0651330301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul 25 21:16:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 21:16:51 2012] Using photon index=1.80, rate=0.0107, arf fullrun_mos1_xmm0651330301_pi300-10000_pass1_cl_src3.arf
[Wed Jul 25 21:16:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 21:16:51 2012] Updating source flux to 2.7e-13
[Wed Jul 25 21:16:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting