[Sat May 26 03:18:11 2012] Detection parameters:
  Position = (249.7, 275.0) = 11 17 27.25 44 10 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.7 +/- 21.8
  Background counts = 85.1
  Rate = 0.009 +/- 0.001

[Sat May 26 03:18:13 2012] Off-axis axis estimate = 3.92'
[Sat May 26 03:23:04 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sat May 26 03:23:04 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Sat May 26 03:23:04 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.848
[Sat May 26 03:23:04 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 8.39"
[Sat May 26 09:47:43 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src59.ximg exists
[Sat May 26 09:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src59.csv
[Sat May 26 09:47:43 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src59_1.ximg exists
[Sat May 26 09:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src59.csv
[Sat May 26 09:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:47:45 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sat May 26 09:47:45 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sat May 26 09:47:45 2012] Fit fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sat May 26 10:21:16 2012] Spatial fit model total counts = 527.477000, observed total counts = 527.000000
[Sat May 26 10:21:16 2012] Offset between fit and detection position for source 60 = 0.227755 pixels
[Sat May 26 10:21:16 2012] 525.790000 total counts/ 419.390000 bgd. counts: snr = 5.195563
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.227755 pixels
  Position = (249.9, 274.9) = 11 17 27.17 44 10 11.8
  Extent = 6.0 (4.8-7.6)", rotation angle = 0
  Source counts = 106.4 +/- 22.9
  Background counts = 419.4
  Rate = 0.004 +/- 0.0009
[Sat May 26 10:21:16 2012] Vigneting correction estimate = 1.000000
[Sat May 26 10:21:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 10:21:16 2012] Assessing source extent using major axis lower bound
[Sat May 26 10:21:16 2012] Source does appear to be extended
[Sat May 26 10:21:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 10:21:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 10:21:35 2012] Initial guess for spatial extent in simple fitting = 5.98"
[Sat May 26 10:21:35 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.137
[Sat May 26 10:21:35 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 5.98"
[Sat May 26 19:11:36 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass1_src54.ximg exists
[Sat May 26 19:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651330101_pi300-10000_cl_pass1_src54.csv
[Sat May 26 19:11:36 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass1_src54_1.ximg exists
[Sat May 26 19:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651330101_pi300-10000_cl_pass1_src54.csv
[Sat May 26 19:11:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651330101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651330101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 19:11:39 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Sat May 26 19:11:39 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Sat May 26 19:11:39 2012] Fit fullrun_pn_xmm0651330101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Sat May 26 19:37:00 2012] Spatial fit model total counts = 526.343000, observed total counts = 524.000000
[Sat May 26 19:37:00 2012] Offset between fit and detection position for source 60 = 0.039982 pixels
[Sat May 26 19:37:00 2012] 517.545000 total counts/ 406.151000 bgd. counts: snr = 5.527364
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.039982 pixels
  Position = (249.9, 274.9) = 11 17 27.15 44 10 11.8
  Extent = 6.1 (5.0-7.8)", rotation angle = 0
  Source counts = 111.4 +/- 22.7
  Background counts = 406.2
  Rate = 0.005 +/- 0.0009
[Sat May 26 19:37:01 2012] Vigneting correction estimate = 1.000000
[Sat May 26 19:37:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 19:37:01 2012] Assessing source extent using major axis lower bound
[Sat May 26 19:37:01 2012] Source does appear to be extended
[Sat May 26 19:37:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 19:37:01 2012] Source is confused with source 58
[Sat May 26 19:37:20 2012] XMMSAS src. selection expression = ellipse(21695.437100, 23869.792400, 365.563811, 365.563811, 0.000000, X, Y)
[Sat May 26 19:37:20 2012] Writing source region out to fullrun_pn_xmm0651330101_pi300-10000_pass1_cl_src60_src.reg
[Sat May 26 19:37:20 2012] Extracting stamp from image fullrun_pn_xmm0651330101_pi300-10000_cl_sm2.00.img.gz, (229, 254) - (271, 296)
[Sat May 26 19:37:20 2012] XMMSAS bgd. selection expression = annulus(21695.437100, 23869.792400, 609.273018, 1218.546035, X, Y) && !ellipse(22599.810577, 25692.091339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20570.697400, 25450.195600, 903.912026, 903.912026, 0.000000, X, Y) && !ellipse(21874.281342, 25190.781982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21148.040000, 25038.620800, 1013.096029, 1013.096029, 0.000000, X, Y) && !ellipse(20119.561859, 25017.878510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20129.907181, 24299.334656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19645.304000, 24092.880000, 1429.040041, 1429.040041, 0.000000, X, Y) && !ellipse(20864.878800, 24017.738000, 1381.232040, 1381.232040, 0.000000, X, Y) && !ellipse(18652.900000, 23732.120000, 3184.896092, 3184.896092, 0.000000, X, Y) && !ellipse(20040.456589, 23545.444397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22374.212738, 25287.263092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23525.422821, 25145.319916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22499.880585, 24354.699982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21038.422363, 22962.644226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20374.465912, 23039.645386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19847.662964, 22349.374939, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 26 19:37:20 2012] Writing fullrun_pn_xmm0651330101_pi300-10000_pass1_cl_src60.gif
[Sat May 26 20:21:53 2012] Mean detx,y = (-5728.93, 1079.01) 
[Sat May 26 20:21:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 20:22:11 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 20:22:11 2012] Setting source spectrum file to fullrun_pn_xmm0651330101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat May 26 20:22:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651330101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sat May 26 23:03:00 2012] Updating aperture counts using extracted products
[Sat May 26 23:03:00 2012] Error reading totcts from fullrun_pn_xmm0651330101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sat May 26 23:03:02 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 23:03:02 2012] Using photon index=1.80, rate=0.00452, arf fullrun_pn_xmm0651330101_pi300-10000_pass1_cl_src60.arf
[Sat May 26 23:03:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 23:03:02 2012] Updating source flux to 1.8e-14
[Sat May 26 23:04:03 2012] Flag c found in src. 60 procflags, skipping spectral fitting