[Sat May 26 03:18:11 2012] Detection parameters:
  Position = (223.6, 284.5) = 11 17 37.80 44 10 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.9 +/- 15.6
  Background counts = 38.9
  Rate = 0.006 +/- 0.0009

[Sat May 26 03:18:13 2012] Off-axis axis estimate = 5.52'
[Sat May 26 03:23:04 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sat May 26 03:23:04 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Sat May 26 03:23:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.696
[Sat May 26 03:23:04 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 9.19"
[Sat May 26 09:47:43 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src53.ximg exists
[Sat May 26 09:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src53.csv
[Sat May 26 09:47:43 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sat May 26 09:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src53.csv
[Sat May 26 09:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:47:45 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sat May 26 09:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat May 26 09:47:45 2012] fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sat May 26 09:47:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat May 26 09:47:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651330101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 10:21:15 2012] Warning, spatial fit 53 centroid is now closest to src. 59
[Sat May 26 10:21:15 2012] Spatial fit model total counts = 436.402000, observed total counts = 404.000000
[Sat May 26 10:21:15 2012] Offset between fit and detection position for source 54 = 1.339975 pixels
[Sat May 26 10:21:15 2012] Warning, changing simple spatial fit ID from 53 to 54
[Sat May 26 10:21:15 2012] 418.500290 total counts/ 411.104000 bgd. counts: snr = 0.364786
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 1.339975 pixels
  Position = (223.8, 283.2) = 11 17 37.73 44 10 47.6
  Extent = 3.1 (2.2-7.9)", rotation angle = 0
  Source counts = 7.4 +/- 20.5
  Background counts = 411.1
  Rate = 0.0003 +/- 0.0008
  Deleting source due to low Poisson probability