[Sun Jul 22 08:47:21 2012] Detection parameters:
  Position = (141.1, 215.9) = 20 21 27.27 43 46 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.3 +/- 17.1
  Background counts = 51.8
  Rate = 0.005 +/- 0.0006

[Sun Jul 22 08:47:21 2012] Off-axis axis estimate = 12.88'
[Sun Jul 22 08:50:25 2012] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 08:50:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 08:50:25 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Sun Jul 22 08:50:25 2012] source mask rpix=3.0, npix_max = 47, mask sum = 44, frac = 0.920
[Sun Jul 22 08:50:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.87"
[Sun Jul 22 09:48:00 2012] fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 22 09:48:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 09:48:00 2012] fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 22 09:48:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 09:48:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:48:00 2012] fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 22 09:48:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 22 09:48:00 2012] fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 22 09:48:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 22 09:48:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651300401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 11:06:56 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.477422 pixels away
[Sun Jul 22 11:06:57 2012] Spatial fit model total counts = 609.561000, observed total counts = 494.000000
[Sun Jul 22 11:06:57 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 22 11:06:57 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 11:06:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 11:06:57 2012] Assessing source extent using major
[Sun Jul 22 11:06:57 2012] Source does appear to be extended
[Sun Jul 22 11:06:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 11:06:57 2012] Deleting source due to low Poisson probability 0.9