[Fri Jun  1 02:02:55 2012] Detection parameters:
  Position = (371.8, 355.0) = 9 1 21.17 -25 49 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.6 +/- 9.2
  Background counts = 5.8
  Rate = 0.006 +/- 0.001

[Fri Jun  1 02:02:55 2012] Off-axis axis estimate = 6.72'
[Fri Jun  1 03:36:52 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 03:36:52 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Fri Jun  1 03:36:52 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.190
[Fri Jun  1 03:36:52 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.79"
[Fri Jun  1 03:59:53 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun  1 03:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_src4.csv
[Fri Jun  1 03:59:53 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun  1 03:59:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_src4.csv
[Fri Jun  1 03:59:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 03:59:53 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun  1 03:59:53 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun  1 03:59:53 2012] Fit fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jun  1 04:00:02 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.177255 pixels away
[Fri Jun  1 04:00:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 04:00:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 04:00:02 2012] Assessing source extent using major
[Fri Jun  1 04:00:02 2012] Source does appear to be extended
[Fri Jun  1 04:00:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 05:02:50 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 05:02:50 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Fri Jun  1 05:02:50 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.190
[Fri Jun  1 05:02:50 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.79"
[Fri Jun  1 05:25:04 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun  1 05:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src4.csv
[Fri Jun  1 05:25:04 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun  1 05:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src4.csv
[Fri Jun  1 05:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 05:25:04 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun  1 05:25:04 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun  1 05:25:04 2012] Fit fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun  1 05:25:15 2012] Spatial fit model total counts = 93.989100, observed total counts = 95.000000
[Fri Jun  1 05:25:15 2012] Offset between fit and detection position for source 8 = 0.377586 pixels
[Fri Jun  1 05:25:15 2012] 93.045500 total counts/ 53.953100 bgd. counts: snr = 5.322114
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.377586 pixels
  Position = (371.4, 355.1) = 9 1 21.29 -25 49 31.9
  Extent = 7.2 (4.7-9.8)", rotation angle = 0
  Source counts = 39.1 +/- 9.6
  Background counts = 54.0
  Rate = 0.003 +/- 0.0007
[Fri Jun  1 05:25:15 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 05:25:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 05:25:15 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 05:25:15 2012] Source does appear to be extended
[Fri Jun  1 05:25:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 05:48:36 2012] XMMSAS src. selection expression = ellipse(32266.103200, 30841.881600, 429.123350, 429.123350, 0.000000, X, Y)
[Fri Jun  1 05:48:36 2012] Writing source region out to fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun  1 05:48:36 2012] Extracting stamp from image fullrun_mos2_xmm0651282201_pi300-10000_cl_sm2.00.img.gz, (347, 330) - (396, 380)
[Fri Jun  1 05:48:36 2012] XMMSAS bgd. selection expression = annulus(32266.103200, 30841.881600, 715.205583, 1430.411167, X, Y)
[Fri Jun  1 05:48:36 2012] Writing fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src8.gif
[Fri Jun  1 05:49:08 2012] Mean detx,y = (8445.66, -5047.90) 
[Fri Jun  1 05:49:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 05:49:17 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 05:49:17 2012] Setting source spectrum file to fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun  1 05:49:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun  1 05:55:53 2012] Not generating rmf since there are only 39 counts
[Fri Jun  1 05:55:53 2012] rmf not generated due to insufficient counts
[Fri Jun  1 06:03:47 2012] Updating aperture counts using extracted products
[Fri Jun  1 06:03:47 2012] Error reading totcts from fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun  1 06:03:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 06:03:47 2012] Using photon index=1.80, rate=0.00282, arf fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src8.arf
[Fri Jun  1 06:03:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 06:03:47 2012] Updating source flux to 5.4e-14
[Fri Jun  1 06:03:49 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting