[Fri Jun  1 02:02:55 2012] Detection parameters:
  Position = (176.4, 395.0) = 9 2 24.12 -25 46 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 320.2 +/- 22.5
  Background counts = 10.3
  Rate = 0.02 +/- 0.002

[Fri Jun  1 02:02:55 2012] Off-axis axis estimate = 11.28'
[Fri Jun  1 03:36:52 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 03:36:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 03:36:52 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Fri Jun  1 03:36:52 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.979
[Fri Jun  1 03:36:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.07"
[Fri Jun  1 03:59:53 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 03:59:53 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 03:59:53 2012] Fit fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jun  1 03:59:53 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 03:59:53 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 03:59:53 2012] Fit fullrun_mos2_xmm0651282201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 04:00:02 2012] Spatial fit model total counts = 931.317000, observed total counts = 930.000000
[Fri Jun  1 04:00:02 2012] Offset between fit and detection position for source 3 = 0.294041 pixels
[Fri Jun  1 04:00:02 2012] 930.170000 total counts/ 464.263000 bgd. counts: snr = 21.623062
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.294041 pixels
  Position = (176.4, 395.3) = 9 2 24.10 -25 46 36.8
  Extent = 14.9 (13.2-17.4)", rotation angle = 0
  Source counts = 465.9 +/- 30.5
  Background counts = 464.3
  Rate = 0.03 +/- 0.002
[Fri Jun  1 04:00:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 04:00:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 04:00:02 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 04:00:02 2012] Source does appear to be extended
[Fri Jun  1 04:00:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 05:02:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 05:02:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 05:02:50 2012] Initial guess for spatial extent in simple fitting = 14.94"
[Fri Jun  1 05:02:50 2012] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.904
[Fri Jun  1 05:02:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.94"
[Fri Jun  1 05:25:04 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 05:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 05:25:04 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 05:25:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 05:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 05:25:04 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 05:25:04 2012] fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 05:25:04 2012] Fit fullrun_mos2_xmm0651282201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 05:25:15 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Fri Jun  1 05:25:15 2012] Spatial fit model total counts = 918.575000, observed total counts = 920.000000
[Fri Jun  1 05:25:15 2012] Offset between fit and detection position for source 3 = 0.155012 pixels
[Fri Jun  1 05:25:15 2012] Warning, changing simple spatial fit ID from 1 to 6
[Fri Jun  1 05:25:15 2012] 913.566000 total counts/ 581.311000 bgd. counts: snr = 13.780572
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.155012 pixels
  Position = (176.3, 395.2) = 9 2 24.15 -25 46 36.9
  Extent = 15.4 (13.7-17.0)", rotation angle = 0
  Source counts = 332.3 +/- 30.2
  Background counts = 581.3
  Rate = 0.02 +/- 0.002
[Fri Jun  1 05:25:15 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 05:25:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 05:25:15 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 05:25:15 2012] Source does appear to be extended
[Fri Jun  1 05:25:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 05:48:36 2012] XMMSAS src. selection expression = ellipse(15289.006000, 34336.064000, 926.412027, 926.412027, 0.000000, X, Y)
[Fri Jun  1 05:48:36 2012] Writing source region out to fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun  1 05:48:36 2012] Extracting stamp from image fullrun_mos2_xmm0651282201_pi300-10000_cl_sm2.00.img.gz, (123, 342) - (230, 448)
[Fri Jun  1 05:48:36 2012] XMMSAS bgd. selection expression = annulus(15289.006000, 34336.064000, 1544.020044, 3088.040089, X, Y) && !ellipse(16550.372000, 33387.188000, 1830.696053, 1830.696053, 0.000000, X, Y) && !ellipse(14417.128000, 32821.496000, 1915.576055, 1915.576055, 0.000000, X, Y)
[Fri Jun  1 05:48:36 2012] Writing fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src3.gif
[Fri Jun  1 05:48:37 2012] Mean detx,y = (-7330.59, -12146.83) 
[Fri Jun  1 05:48:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 05:48:47 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 05:48:47 2012] Setting source spectrum file to fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun  1 05:48:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun  1 06:03:47 2012] Updating aperture counts using extracted products
[Fri Jun  1 06:03:47 2012] Error reading totcts from fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun  1 06:03:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 06:03:47 2012] Using photon index=1.80, rate=0.024, arf fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src3.arf
[Fri Jun  1 06:03:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 06:03:47 2012] Updating source flux to 4.8e-13
[Fri Jun  1 06:04:09 2012] Reading fit data from xmm0651282201/analysis//spectral/fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src3_pl.csv
[Fri Jun  1 06:04:09 2012] Spectral fit parameter nH value = 2.67941e+21
[Fri Jun  1 06:04:09 2012] Spectral fit parameter PhoIndex value = 2.72802
[Fri Jun  1 06:04:09 2012] Failed to get F(0.3-8.0) from xmm0651282201/analysis//spectral/fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 06:04:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 06:04:09 2012] Using Nh = 2.7e+21, photon index=2.73, rate=0.024, arf fullrun_mos2_xmm0651282201_pi300-10000_pass1_cl_src3.arf
[Fri Jun  1 06:04:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 06:04:09 2012] Updating source flux to 4e-13