[Sat Aug 11 11:29:56 2012] Detection parameters:
  Position = (404.5, 441.4) = 2 37 17.49 -19 22 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.7 +/- 8.2
  Background counts = 5.2
  Rate = 0.003 +/- 0.0006

[Sat Aug 11 11:29:56 2012] Off-axis axis estimate = 12.90'
[Sat Aug 11 12:04:22 2012] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 12:04:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 12:04:22 2012] Initial guess for spatial extent in simple fitting = 12.88"
[Sat Aug 11 12:04:22 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.023
[Sat Aug 11 12:04:22 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.88"
[Sat Aug 11 12:27:38 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src10.ximg exists
[Sat Aug 11 12:27:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src10.csv
[Sat Aug 11 12:27:38 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Aug 11 12:27:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src10.csv
[Sat Aug 11 12:27:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 12:27:38 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Aug 11 12:27:38 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Aug 11 12:27:38 2012] Fit fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Aug 11 12:47:42 2012] Spatial fit model total counts = 90.998600, observed total counts = 91.000000
[Sat Aug 11 12:47:42 2012] Offset between fit and detection position for source 12 = 1.204605 pixels
[Sat Aug 11 12:47:42 2012] 91.288400 total counts/ 59.234700 bgd. counts: snr = 4.164761
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.204605 pixels
  Position = (403.4, 441.9) = 2 37 17.82 -19 22 54.6
  Extent = 8.4 (6.0-11.6)", rotation angle = 0
  Source counts = 32.1 +/- 9.6
  Background counts = 59.2
  Rate = 0.002 +/- 0.0007
[Sat Aug 11 12:47:42 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 12:47:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 12:47:42 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 12:47:42 2012] Source does appear to be extended
[Sat Aug 11 12:47:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 13:20:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:20:56 2012] Initial guess for spatial extent in simple fitting = 8.45"
[Sat Aug 11 13:20:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Sat Aug 11 13:20:56 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.45"
[Sat Aug 11 13:44:02 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_src10.ximg exists
[Sat Aug 11 13:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_src10.csv
[Sat Aug 11 13:44:02 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Aug 11 13:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_src10.csv
[Sat Aug 11 13:44:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 13:44:02 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Aug 11 13:44:02 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Aug 11 13:44:02 2012] Fit fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Aug 11 14:03:30 2012] Spatial fit model total counts = 74.998700, observed total counts = 75.000000
[Sat Aug 11 14:03:30 2012] Offset between fit and detection position for source 12 = 0.064191 pixels
[Sat Aug 11 14:03:30 2012] 75.725500 total counts/ 42.364200 bgd. counts: snr = 5.125585
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.064191 pixels
  Position = (403.4, 441.8) = 2 37 17.81 -19 22 54.8
  Extent = 8.6 (6.1-11.7)", rotation angle = 0
  Source counts = 33.4 +/- 8.7
  Background counts = 42.4
  Rate = 0.002 +/- 0.0006
[Sat Aug 11 14:03:30 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 14:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 14:03:30 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 14:03:30 2012] Source does appear to be extended
[Sat Aug 11 14:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 14:27:25 2012] XMMSAS src. selection expression = ellipse(35050.145000, 38389.559000, 514.751415, 514.751415, 0.000000, X, Y)
[Sat Aug 11 14:27:25 2012] Writing source region out to fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src12_src.reg
[Sat Aug 11 14:27:25 2012] Extracting stamp from image fullrun_mos1_xmm0651281701_pi300-10000_cl_sm2.00.img.gz, (374, 412) - (433, 471)
[Sat Aug 11 14:27:25 2012] XMMSAS bgd. selection expression = annulus(35050.145000, 38389.559000, 857.919025, 1715.838049, X, Y)
[Sat Aug 11 14:27:25 2012] Writing fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src12.gif
[Sat Aug 11 14:30:35 2012] Mean detx,y = (14009.98, 9.57) 
[Sat Aug 11 14:30:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 14:30:52 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 14:30:52 2012] Setting source spectrum file to fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Aug 11 14:30:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Aug 11 14:32:21 2012] Not generating rmf since there are only 33 counts
[Sat Aug 11 14:32:21 2012] rmf not generated due to insufficient counts
[Sat Aug 11 14:39:29 2012] Updating aperture counts using extracted products
[Sat Aug 11 14:39:29 2012] Error reading totcts from fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Aug 11 14:39:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 14:39:30 2012] Using photon index=1.80, rate=0.00246, arf fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src12.arf
[Sat Aug 11 14:39:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 14:39:30 2012] Updating source flux to 5.9e-14
[Sat Aug 11 14:39:32 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Aug 11 14:39:33 2012] xmm0651281701/analysis//spectral/fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete