[Sat Aug 11 11:29:55 2012] Detection parameters:
  Position = (326.2, 224.0) = 2 37 41.54 -19 38 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.5 +/- 12.8
  Background counts = 5.0
  Rate = 0.009 +/- 0.002

[Sat Aug 11 11:29:56 2012] Off-axis axis estimate = 5.76'
[Sat Aug 11 12:04:22 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 12:04:22 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Sat Aug 11 12:04:22 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.753
[Sat Aug 11 12:04:22 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.31"
[Sat Aug 11 12:27:38 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src2.ximg exists
[Sat Aug 11 12:27:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src2.csv
[Sat Aug 11 12:27:38 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Aug 11 12:27:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src2.csv
[Sat Aug 11 12:27:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 12:27:38 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Aug 11 12:27:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Aug 11 12:27:38 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Aug 11 12:27:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Aug 11 12:27:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651281701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 12:47:42 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.568076 pixels away
[Sat Aug 11 12:47:42 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 12:47:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 12:47:42 2012] Assessing source extent using major
[Sat Aug 11 12:47:42 2012] Source does appear to be extended
[Sat Aug 11 12:47:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 13:20:56 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:20:56 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Sat Aug 11 13:20:56 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.753
[Sat Aug 11 13:20:56 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.31"
[Sat Aug 11 13:44:02 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_src2.ximg exists
[Sat Aug 11 13:44:02 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Aug 11 13:44:02 2012] Fit fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat Aug 11 13:44:02 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Aug 11 13:44:02 2012] fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Aug 11 13:44:02 2012] Fit fullrun_mos1_xmm0651281701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Aug 11 14:03:30 2012] Spatial fit model total counts = 109.661000, observed total counts = 109.000000
[Sat Aug 11 14:03:30 2012] Offset between fit and detection position for source 1 = 1.621733 pixels
[Sat Aug 11 14:03:30 2012] 108.329900 total counts/ 67.932500 bgd. counts: snr = 4.901338
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.621733 pixels
  Position = (326.7, 225.5) = 2 37 41.38 -19 38 35.8
  Extent = 4.6 (2.3-7.3)", rotation angle = 0
  Source counts = 40.4 +/- 10.4
  Background counts = 67.9
  Rate = 0.003 +/- 0.0008
[Sat Aug 11 14:03:30 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 14:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 14:03:30 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 14:03:30 2012] Source does appear to be extended
[Sat Aug 11 14:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 14:27:25 2012] XMMSAS src. selection expression = ellipse(28376.621000, 19572.884600, 275.173208, 275.173208, 0.000000, X, Y)
[Sat Aug 11 14:27:25 2012] Writing source region out to fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug 11 14:27:25 2012] Extracting stamp from image fullrun_mos1_xmm0651281701_pi300-10000_cl_sm2.00.img.gz, (311, 210) - (343, 241)
[Sat Aug 11 14:27:25 2012] XMMSAS bgd. selection expression = annulus(28376.621000, 19572.884600, 458.622013, 917.244026, X, Y)
[Sat Aug 11 14:27:25 2012] Writing fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src1.gif
[Sat Aug 11 14:27:51 2012] Mean detx,y = (-5560.73, 3994.67) 
[Sat Aug 11 14:27:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 14:28:04 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 14:28:04 2012] Setting source spectrum file to fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 11 14:28:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug 11 14:31:25 2012] Not generating rmf since there are only 40 counts
[Sat Aug 11 14:31:25 2012] rmf not generated due to insufficient counts
[Sat Aug 11 14:39:29 2012] Updating aperture counts using extracted products
[Sat Aug 11 14:39:29 2012] Error reading totcts from fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 11 14:39:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 14:39:29 2012] Using photon index=1.80, rate=0.00298, arf fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src1.arf
[Sat Aug 11 14:39:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 14:39:29 2012] Updating source flux to 5.8e-14
[Sat Aug 11 14:39:32 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Aug 11 14:39:33 2012] xmm0651281701/analysis//spectral/fullrun_mos1_xmm0651281701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete