[Sat Jun 23 10:11:16 2012] Detection parameters:
  Position = (159.4, 308.1) = 16 5 23.26 1 20 10.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.1 +/- 11.9
  Background counts = 17.2
  Rate = 0.006 +/- 0.001

[Sat Jun 23 10:11:17 2012] Off-axis axis estimate = 10.10'
[Sat Jun 23 10:13:30 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 10:13:30 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Sat Jun 23 10:13:30 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.066
[Sat Jun 23 10:13:30 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.48"
[Sat Jun 23 10:49:08 2012] fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 23 10:49:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_src11.csv
[Sat Jun 23 10:49:08 2012] fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 23 10:49:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_src11.csv
[Sat Jun 23 10:49:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 10:49:08 2012] fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 23 10:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 23 10:49:08 2012] fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 23 10:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 23 10:49:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651281201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:32:41 2012] Source 12 is offset by 3.411242 and 5.820138 pixels which is larger than
2 X fitted extent = 0.841577 x 0.841577, not incorporating fit results
[Sat Jun 23 11:32:41 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 11:32:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 11:32:41 2012] Assessing source extent using major
[Sat Jun 23 11:32:41 2012] Source does appear to be extended
[Sat Jun 23 11:32:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 11:32:57 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 11:32:57 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Sat Jun 23 11:32:57 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.066
[Sat Jun 23 11:32:57 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.48"
[Sat Jun 23 11:58:42 2012] fullrun_pn_xmm0651281201_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 23 11:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651281201_pi300-10000_cl_pass1_src10.csv
[Sat Jun 23 11:58:42 2012] fullrun_pn_xmm0651281201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 23 11:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651281201_pi300-10000_cl_pass1_src10.csv
[Sat Jun 23 11:58:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651281201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651281201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 11:58:43 2012] fullrun_pn_xmm0651281201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 23 11:58:43 2012] fullrun_pn_xmm0651281201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 23 11:58:43 2012] Fit fullrun_pn_xmm0651281201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jun 23 12:25:38 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.998702 pixels away
[Sat Jun 23 12:25:38 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 12:25:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 12:25:38 2012] Assessing source extent using major
[Sat Jun 23 12:25:38 2012] Source does appear to be extended
[Sat Jun 23 12:25:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 12:25:48 2012] XMMSAS src. selection expression = ellipse(13820.054825, 26755.111969, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 23 12:25:48 2012] Writing source region out to fullrun_pn_xmm0651281201_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun 23 12:25:48 2012] Extracting stamp from image fullrun_pn_xmm0651281201_pi300-10000_cl_sm2.00.img.gz, (122, 271) - (197, 346)
[Sat Jun 23 12:25:49 2012] XMMSAS bgd. selection expression = annulus(13820.054825, 26755.111969, 1087.500000, 2175.000000, X, Y)
[Sat Jun 23 12:25:49 2012] Writing fullrun_pn_xmm0651281201_pi300-10000_pass1_cl_src12.gif
[Sat Jun 23 12:32:50 2012] Mean detx,y = (10510.69, 5112.05) 
[Sat Jun 23 12:32:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 12:33:10 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 12:33:11 2012] Setting source spectrum file to fullrun_pn_xmm0651281201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 23 12:33:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651281201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jun 23 12:49:02 2012] Not generating rmf since there are only 75 counts
[Sat Jun 23 12:49:02 2012] rmf not generated due to insufficient counts
[Sat Jun 23 13:13:06 2012] Updating aperture counts using extracted products
[Sat Jun 23 13:13:06 2012] Error reading totcts from fullrun_pn_xmm0651281201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 23 13:13:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 13:13:06 2012] Using photon index=1.80, rate=0.00624, arf fullrun_pn_xmm0651281201_pi300-10000_pass1_cl_src12.arf
[Sat Jun 23 13:13:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 13:13:06 2012] Updating source flux to 2.9e-14
[Sat Jun 23 13:13:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting