[Tue Feb 21 10:40:10 2012] Detection parameters:
  Position = (299.8, 334.7) = 15 32 55.87 30 21 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 474.0 +/- 45.6
  Background counts = 104.9
  Rate = 0.02 +/- 0.002

[Tue Feb 21 10:40:11 2012] Off-axis axis estimate = 2.63'
[Tue Feb 21 10:44:32 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 10:44:32 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Tue Feb 21 10:44:32 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Tue Feb 21 10:44:32 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.74"
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Feb 21 11:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src4.csv
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Feb 21 11:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src4.csv
[Tue Feb 21 11:29:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 11:29:31 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Feb 21 11:29:31 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Feb 21 11:29:31 2012] Fit fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Feb 21 14:18:28 2012] Source 4 is offset by 5.058863 and -7.382596 pixels which is larger than
2 X fitted extent = 7.120920 x 7.120920, not incorporating fit results
[Tue Feb 21 14:18:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 14:18:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 14:18:28 2012] Assessing source extent using major
[Tue Feb 21 14:18:28 2012] Source does appear to be extended
[Tue Feb 21 14:18:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 14:18:52 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 14:18:52 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Tue Feb 21 14:18:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Tue Feb 21 14:18:52 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.74"
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Feb 21 14:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src4.csv
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Feb 21 14:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src4.csv
[Tue Feb 21 14:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Feb 21 14:50:32 2012] Fit fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Feb 21 20:19:28 2012] Source 4 is offset by -5.487827 and 5.821657 pixels which is larger than
2 X fitted extent = 2.632874 x 2.632874, not incorporating fit results
[Tue Feb 21 20:19:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 20:19:28 2012] Assessing source extent using major
[Tue Feb 21 20:19:28 2012] Source does appear to be extended
[Tue Feb 21 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 20:19:51 2012] XMMSAS src. selection expression = ellipse(26030.565094, 29070.462128, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 20:19:51 2012] Writing source region out to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src4_src.reg
[Tue Feb 21 20:19:51 2012] Extracting stamp from image fullrun_pn_xmm0651240101_pi300-10000_cl_sm2.00.img.gz, (262, 297) - (337, 372)
[Tue Feb 21 20:19:51 2012] XMMSAS bgd. selection expression = annulus(26030.565094, 29070.462128, 1087.500000, 2175.000000, X, Y) && !ellipse(26547.224200, 27801.508800, 2704.248078, 2704.248078, 0.000000, X, Y) && !ellipse(26623.735809, 29716.943176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25011.586090, 27092.061737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28369.964508, 26236.361725, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 20:19:51 2012] Writing fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src4.gif
[Tue Feb 21 20:42:14 2012] Mean detx,y = (33.70, -1344.82) 
[Tue Feb 21 20:42:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 20:42:47 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 20:42:48 2012] Setting source spectrum file to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Feb 21 20:42:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Feb 22 00:08:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 00:08:16 2012] rmf not generated due to insufficient counts
[Wed Feb 22 02:13:47 2012] Updating aperture counts using extracted products
[Wed Feb 22 02:13:47 2012] Error reading totcts from fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Feb 22 02:13:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 02:13:48 2012] Using photon index=1.80, rate=0.0206, arf fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src4.arf
[Wed Feb 22 02:13:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 02:13:48 2012] Updating source flux to 5.6e-14
[Wed Feb 22 02:16:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting