[Tue Feb 21 10:40:10 2012] Detection parameters:
  Position = (305.9, 320.0) = 15 32 53.79 30 21 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29416.4 +/- 205.7
  Background counts = 107.1
  Rate = 1 +/- 0.007

[Tue Feb 21 10:40:11 2012] Off-axis axis estimate = 1.66'
[Tue Feb 21 10:44:32 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 10:44:32 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Feb 21 10:44:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Tue Feb 21 10:44:32 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.26"
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Feb 21 11:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src3.csv
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Feb 21 11:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src3.csv
[Tue Feb 21 11:29:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 11:29:31 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Feb 21 11:29:31 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Feb 21 11:29:31 2012] Fit fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Feb 21 14:18:28 2012] Spatial fit model total counts = 36623.200000, observed total counts = 36623.000000
[Tue Feb 21 14:18:28 2012] Offset between fit and detection position for source 3 = 0.269360 pixels
[Tue Feb 21 14:18:28 2012] 36711.400000 total counts/ 10743.600000 bgd. counts: snr = 250.530291
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.269360 pixels
  Position = (305.7, 320.1) = 15 32 53.88 30 20 59.9
  Extent = 11.3 (11.1-11.4)", rotation angle = 0
  Source counts = 25967.8 +/- 191.6
  Background counts = 10743.6
  Rate = 1 +/- 0.008
[Tue Feb 21 14:18:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 14:18:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 14:18:28 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 14:18:28 2012] Source does appear to be extended
[Tue Feb 21 14:18:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 14:18:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 14:18:52 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Tue Feb 21 14:18:52 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.941
[Tue Feb 21 14:18:52 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.28"
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Feb 21 14:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src3.csv
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Feb 21 14:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src3.csv
[Tue Feb 21 14:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Feb 21 14:50:32 2012] Fit fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Feb 21 20:19:28 2012] Spatial fit model total counts = 36622.800000, observed total counts = 36623.000000
[Tue Feb 21 20:19:28 2012] Offset between fit and detection position for source 3 = 0.000221 pixels
[Tue Feb 21 20:19:28 2012] 36711.400000 total counts/ 10762.000000 bgd. counts: snr = 250.138664
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000221 pixels
  Position = (305.7, 320.1) = 15 32 53.88 30 20 59.9
  Extent = 11.3 (11.1-11.4)", rotation angle = 0
  Source counts = 25949.4 +/- 191.6
  Background counts = 10762.0
  Rate = 1 +/- 0.008
[Tue Feb 21 20:19:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 20:19:28 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 20:19:28 2012] Source does appear to be extended
[Tue Feb 21 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 20:19:51 2012] Counts = 25949.400000, rescaling region sizes by 3.000000
[Tue Feb 21 20:19:51 2012] XMMSAS src. selection expression = ellipse(26547.224200, 27801.508800, 2028.186058, 2028.186058, 0.000000, X, Y)
[Tue Feb 21 20:19:51 2012] Writing source region out to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src3_src.reg
[Tue Feb 21 20:19:51 2012] Extracting stamp from image fullrun_pn_xmm0651240101_pi300-10000_cl_sm2.00.img.gz, (189, 204) - (422, 437)
[Tue Feb 21 20:19:51 2012] XMMSAS bgd. selection expression = annulus(26547.224200, 27801.508800, 10140.930292, 20281.860584, X, Y) && !ellipse(27484.830000, 23278.795000, 397.342411, 397.342411, 0.000000, X, Y) && !ellipse(39928.862885, 22388.438385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26030.565094, 29070.462128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20140.807404, 23058.227936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16349.588852, 21536.820480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12844.609009, 33325.815643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30297.117523, 34036.981171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23928.071289, 32773.606720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35460.894623, 28605.099213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34445.778687, 26031.133270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11522.445000, 35915.015200, 889.904026, 889.904026, 0.000000, X, Y) && !ellipse(26623.735809, 29716.943176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25011.586090, 27092.061737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28369.964508, 26236.361725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31351.594269, 25297.737183, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 20:19:51 2012] Writing fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src3.gif
[Tue Feb 21 20:23:39 2012] Mean detx,y = (176.53, -57.14) 
[Tue Feb 21 20:23:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 20:41:54 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 20:41:55 2012] Setting source spectrum file to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Feb 21 20:41:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Feb 22 02:13:47 2012] Updating aperture counts using extracted products
[Wed Feb 22 02:13:47 2012] Error reading totcts from fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Feb 22 02:13:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 02:13:48 2012] Using photon index=1.80, rate=1.08, arf fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src3.arf
[Wed Feb 22 02:13:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 02:13:48 2012] Updating source flux to 2.3e-12