[Tue Feb 21 10:40:10 2012] Detection parameters:
  Position = (288.0, 312.0) = 15 32 59.81 30 20 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.7 +/- 21.3
  Background counts = 102.2
  Rate = 0.005 +/- 0.0008

[Tue Feb 21 10:40:11 2012] Off-axis axis estimate = 1.24'
[Tue Feb 21 10:44:32 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 10:44:32 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Tue Feb 21 10:44:32 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Tue Feb 21 10:44:32 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.05"
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src15.ximg exists
[Tue Feb 21 11:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src15.csv
[Tue Feb 21 11:29:30 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Feb 21 11:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src15.csv
[Tue Feb 21 11:29:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 11:29:31 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Feb 21 11:29:31 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Feb 21 11:29:31 2012] Fit fullrun_pn_xmm0651240101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Feb 21 14:18:28 2012] Source 18 is offset by -6.432827 and -6.142256 pixels which is larger than
2 X fitted extent = 4.436225 x 4.436225, not incorporating fit results
[Tue Feb 21 14:18:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 14:18:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 14:18:28 2012] Assessing source extent using major
[Tue Feb 21 14:18:28 2012] Source does appear to be extended
[Tue Feb 21 14:18:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 14:18:52 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 14:18:52 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Tue Feb 21 14:18:52 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Tue Feb 21 14:18:52 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.05"
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src11.ximg exists
[Tue Feb 21 14:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src11.csv
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Feb 21 14:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src11.csv
[Tue Feb 21 14:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Feb 21 14:50:32 2012] fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Feb 21 14:50:32 2012] Fit fullrun_pn_xmm0651240101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Feb 21 20:19:28 2012] Source 18 is offset by -6.432827 and -6.310026 pixels which is larger than
2 X fitted extent = 4.834805 x 4.834805, not incorporating fit results
[Tue Feb 21 20:19:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 20:19:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 20:19:28 2012] Assessing source extent using major
[Tue Feb 21 20:19:28 2012] Source does appear to be extended
[Tue Feb 21 20:19:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 20:19:51 2012] XMMSAS src. selection expression = ellipse(25011.586090, 27092.061737, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 20:19:51 2012] Writing source region out to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src18_src.reg
[Tue Feb 21 20:19:51 2012] Extracting stamp from image fullrun_pn_xmm0651240101_pi300-10000_cl_sm2.00.img.gz, (251, 274) - (326, 349)
[Tue Feb 21 20:19:51 2012] XMMSAS bgd. selection expression = annulus(25011.586090, 27092.061737, 1087.500000, 2175.000000, X, Y) && !ellipse(26547.224200, 27801.508800, 2704.248078, 2704.248078, 0.000000, X, Y) && !ellipse(26030.565094, 29070.462128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26623.735809, 29716.943176, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 20:19:51 2012] Writing fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src18.gif
[Tue Feb 21 20:51:09 2012] Mean detx,y = (-1379.25, 55.74) 
[Tue Feb 21 20:51:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 20:51:54 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 20:51:55 2012] Setting source spectrum file to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Feb 21 20:51:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Feb 22 00:19:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 00:19:55 2012] rmf not generated due to insufficient counts
[Wed Feb 22 02:13:47 2012] Updating aperture counts using extracted products
[Wed Feb 22 02:13:47 2012] Error reading totcts from fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Feb 22 02:13:48 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 02:13:48 2012] Using photon index=1.80, rate=0.00457, arf fullrun_pn_xmm0651240101_pi300-10000_pass1_cl_src18.arf
[Wed Feb 22 02:13:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 02:13:48 2012] Updating source flux to 1.3e-14
[Wed Feb 22 02:16:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting